Simultaneous extraction of organotin, organolead and organomercury species from soils and litter

Extracting organotin compounds (OTC) from soils is difficult due to the high cation exchange and complexation capacity of soils, and little information about OTC in soils is available. In this study, a new extraction method, combining 1 M CaCl₂, 0.1% tropolone, and glacial acetic acid was developed. Recoveries of mono-substituted OTC from spiked plant litter, and soil samples were improved substantially to 40% compared to classical glacial acetic acid extraction commonly used in sedimentology, yielding <10% recovery in C-rich soil samples. Simultaneously, the recovery of other OTC, trimethyllead and monomethylmercury was satisfactory. The recoveries of most species from the spiked litter, upland and wetland soils exceeded 70%. The new method extracted much more organometallics from unspiked organic soils and litter than microwave- and ultrasound-assisted extraction and accelerated solvent extraction, most likely due to exchange of organometallics from the solid phase by Ca²⁺. The method is simple, highly efficient and with low contamination. Together with GC-ICP-mass spectrometry, the method allows the detection of these organometallics in the pg g⁻¹ range and it is particularly suitable for soil and plant materials with low organometallics contents.     

Location of saddle points and minimum energy paths by a constrained simplex optimization procedure

Two methods are proposed, one for the location of saddle points and one for the calculation of steepest-descent paths on multidimensional surfaces. Both methods are based on a constrained simplex optimization technique that avoids the evaluation of gradients or second derivative matrices. Three chemical reactions of increasing structural complexity are studied within the PRDDO SCF approximation. Predicted properties of reaction hypersurfaces are in good overall agreement with those determined by gradient minimization and gradient following algorithms in connection with various ab initio SCF methods. Computational efforts required by the new procedures are discussed.     

四唑及其衍生物的理论研究Ⅷ: 硝氨四唑衍生物的从头算

运用从头计算法,在HF/6-31G^*水平下,全优化计算了7种硝氨四唑衍生物的分子几何和电子结构。结果表明,标题物的四唑环近似为平面构型;2H式中性分子的芳香性大于相应的1H式异构体。5-硝氨-1H四唑分子内氢键使硝氨基与环共面;其余标题物中硝氨基与环垂直。不同水平下的总能量计算表明,标题物中电子相关效应显著;1H式中性分子较2H式的能量高,5-硝氨四唑负离子在三个负离子中最稳定。根据电荷分布阐明了四唑环质子化位置和标题物与金属的配位方式。此外还计算了各标题物的红外光谱及热力学性质。     

Kinetic model ofCO oxidation on nonuniform surface analyzed regardingCOads spillover, 2. homotopic method. Effect ofm1 surface portion

The homotopic method has been used to analyze the kinetic model of three-stageCO oxidation on two nonuniform surface patches conjugated byCO ₂ spillover. Diagrams of steady states depending on the portion of surface patchm ₁ at various temperatures and pressure ratiosP(O ₂)/P(CO) have been constructed. The ratios of different type patches corresponding to the maximum overall reaction rate have been found.     

Permeation associated with three-phase-partitioning method on release of green fluorescent protein

Transformed cells of Escherichia coli expressing recombinant green fluorescent protein (GFPuv) were subjected to two methods of extraction: (1) freezing/thawing/sonication (FTS) cycles prior to the three-phase partitioning (TPP) method, or (2) directly to TPP extraction. The amount of GFPuv released by the FTS plus TPP method varied: 374μg/mL (first cycle), 93–442 μg/mL (second cycle), 32–359 μg/mL (third cycle), 18–115 μg/mL (fourth cycle). The GFPuv yields by the second method (TPP only) were, 23–54 μg/mL for the first extract and 33–91 μg/mL for the second. The FTS plus TPP method released similar amounts of GFPuv to that extracted by TPP; and provided a better mixture elution through the hydrophobic interaction column: 13–63 μg/mL for FTS plus TPP methods, and 2.5–13 μg/mL for TPP. The results showed that although selective permeation is a more laborious methodology, it was more efficient for obtaining of GFPuv in relation to the direct extraction of the cells for TPP.     

Thermodynamics of liquid Fe-Si and Fe-Ge alloys

The enthalpies of mixing of liquid binary Fe-Ge (1765±5 K) and Fe-Si (1750±5 K) alloys were determined using a high-temperature isoperibolic calorimeter. The thermodynamic properties of Fe-Ge melts were also studied by electromotive force method in the temperature range of 1250-1580 K. The comparison of our measurement results with literature data has been performed. The extreme negative values of integral enthalpy of mixing and alternating-sign deviations from Raoult's low for germanium can be explained by the influence of binary clusters formation. This revised version was published online in July 2006 with corrections to the Cover Date.     

Quantum-chemical study of manifestations of conjugation in molecules containing conjugated C=C and C=O bonds

Based on the MNDO calculations of the electronic structure of the molecules of acrolein, glyoxal, and butadiene, possible mechanisms of the conjugation in systems containing conjugated C=C and C=O bonds have been analyzed. In the electronic ground state ofs-trans-acrolein, the , -conjugation is very small, whereas in the first excited electronic state, the conjugation is substantial, In the ground state ofs-trans-glyoxal, the ,-conjugation should manifest itself clearly but should be weaker than in butadiene, whereas in the first excited electronic state, this conjugation should be more pronounced, Alternation of double and single bonds in the classic structural formula of a molecule does not ensure that this molecule exhibits the properties of a -conjugated system even in planar conformations.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1648–1652, July, 1996.     

“Comment” on the Reply to the Paper “On the Elber–Karplus Reaction Path-Following Method and Related Procedures”

The flaws in the Reply [1] to our paper [2] have been pointed out. Elber and Karplus (EK) have not disproved our irrefutable global statement that the energy average cannot be minimized which rebuts the theoretical background of EK-type calculations. Another statement of ours has shown that even a curve for which the average energy is locally minimal for all directional perturbations in the sense of classical variational calculus cannot be identical with the reaction path (RP) defined as a steepest descent path (SDP). EK found an error in the early preprint of our theoretical paper [3] and because of this error they qualified our correct variational statement as false for all the SDPs consisting of a straight line each. Mixing global and variational arguments, EK refuted our criticism in a logically incorrect manner. In this Comment we prove that both of our earlier statements invariably remain in force and the criticism included in those has been as well-established and solid as was before.     

Pure and doped lanthanum cobaltites obtained by combustion method

We report the synthesis of La_1−xSr_xCoO₃ nanopowders by solution combustion method using metal nitrates and -alanine (alanine method) or urea (urea method) as fuel. The influence of metal nitrates/organic substance molar ratio and the type of fuel was investigated. The isolated complex precursors were characterized by atomic absorption spectroscopy (AAS), FT-IR spectra and DTA–TG analysis. The La_1−xSr_xCoO₃ (x = 0–0.3) powders were characterized by X-ray diffraction (XRD), scanning electron microscopy–energy-dispersive X-ray analysis (SEM–EDX), as well as by specific surface area measurements. XRD patterns indicate the formation of single-phase LaCoO₃ (rhombohedral) when as-synthesized powders were calcined at 873 K, 3 h in the case of the alanine method and at 1073 K, 3 h for urea-based system. Also, strontium doped lanthanum cobaltites obtained by both methods at 1273 K are single phase with rhombohedral perovskite-like structure as XRD data have proved. SEM investigation of pure and doped lanthanum cobaltites reveal that the samples prepared by both methods have fine particles with tendency of agglomerates formation with different shapes, spongy aspect and high porosity. La_1−xSr_xCoO₃ nanopowders obtained by alanine method have larger specific surface area values than those prepared by urea method.     

氯化聚乙烯弹性体的固相法合成

讨论了以固相法合成氯化聚乙烯（ＣＰＥ）弹性体的过程．实验结果表明，以固相氯化反应所得的ＣＰＥ，其大分子链上Ｃｌ取代基的分布比水相悬浮法更均匀．氯化过程的温度直接影响氯化速度及分子结构，如残留结晶、氯分布等．而聚乙烯颗粒表面与内部的氯化程度取决于氯化速度．大分子链上Ｃｌ取代基对邻近基团的氯化起阻碍作用