高铝熔渣物相析出演变规律研究

以改善高铝渣浸出性能为目标,采用DSC实验和SEM-EDS检测方法,研究了高铝渣控温冷却过程中物相析出规律,考察了降温速率、n(CaO)/n(Al₂O₃)和MgO含量对铝酸钙渣物相析出演变规律的影响.结果表明:当降温速率加快时,熔渣凝固过程趋于更大程度的偏析,C₂S相变愈不充分,粒度粗化,劣化了自粉行为和浸出条件;随着调高渣中n(CaO)/n(Al₂O₃),C₁₂A₇的析出温度升高,物相析出活性按照CA→C₁₂A₇→C₃A逐渐增强;当渣中含有MgO时,物相中出现C₂MS₂,不利于C₂S物相转变,更为重要的是MgO富集在含铝物相中形成Q相,显著恶化氧化铝浸出率和收得率.     

Efficient one‐pot synthesis of water‐compatible and photoresponsive molecularly imprinted polymer nanoparticles by facile RAFT precipitation polymerization

A facile, general, and highly efficient one‐pot approach to obtain azobenzene (azo)‐containing molecularly imprinted polymer (MIP) nanoparticles with photoresponsive template binding and release properties in aqueous media is described, which involves the combined use of hydrophilic macromolecular chain transfer agent‐mediated reversible addition‐fragmentation chain transfer precipitation polymerization and easily available water‐insoluble azo functional monomers. The resulting azo‐containing MIPs were characterized with dynamic laser scattering (DLS), SEM, FTIR, static contact angle and water dispersion studies, and equilibrium binding experiments. They have proven to be nanoparticles (their diameters being around 104–397 nm, as determined by DLS in methanol) with surface‐grafted hydrophilic polymer brushes and exhibit excellent pure water‐compatible template binding properties. Moreover, obvious photoregulated template binding behaviors were observed for such azo‐containing MIP nanoparticles, which led to their largely accelerated template release in the aqueous media under the UV light irradiation. Furthermore, the general applicability of the strategy was also demonstrated. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1941–1952     

Dislocation driven chromium precipitation in Fe-9Cr binary alloy: a positron lifetime study

The influence of initial heat treatment on anomalous Cr precipitation within high temperature solubility region of the Fe–9Cr alloy has been investigated using positron lifetime studies. Air-quenched samples with pre-existing dislocations exhibited a distinct annealing stage in positron lifetime between 800 and 1100?K corresponding to Cr-precipitation. During this stage, Transmission Electron Microscopy showed fine precipitates of average size 4 nm, dispersed throughout the sample and from Energy-dispersive X-ray spectroscopy (EDS) analysis they are found to be Cr-enriched. The presence of dislocations is found to be responsible for Cr precipitation.     

Morphology Engineering of Fullerene (C60) Microstructures Featuring Surface Cracks with Enhanced Photoluminescence and Microscopic Recognition Properties

Surface cracks could improve the optical and photoelectronic properties of crystalline materials as they increase specific surface area, but the controlled self-assembly of fullerene (C₆₀) molecules into micro-/nanostructures with surface cracks is still challenging. Herein, we report the morphology engineering of novel C₆₀ microstructures bearing surface cracks for the first time, selecting phenetole and propan-1-ol (NPA) as good and poor solvents, respectively. Our systematic investigations reveal that phenetole molecules initially participate in the formation of the ends of the C₆₀ microstructures, and then NPA molecules are involved in the gradual growth of the sidewalls of the microstructures. Therefore, the surface cracks of C₆₀ microstructures can be finely regulated by adjusting the addition of NPA and the crystallization time. Interestingly, the cracked C₆₀ microstructures show superior photoluminescence properties relative to the smooth microstructures due to the increased specific surface area. In addition, C₆₀ microstructures with wide cracks show preferential recognition of silica particles over C₆₀ particles owing to electrostatic interactions between the negatively charged C₆₀ microstructures and the positively charged silica microparticles. These C₆₀ crystals with surface cracks have potential applications from optoelectronics to biology.     

Preparation and Tribological Behaviors of Lubricants—Oil Based on Modified Microbial Oil with Nano-Schiff Base Copper Complex

A W/O microemulsion reactor was used to prepare four kinds of modified lubricants: (i) modified lubricant 1, modified epoxidized microbial oil + rape oil in volume ratio of 1:1; (ii) modified lubricant 2, modified esterified microbial oil + rape oil in volume ratio of 1:3; (iii) modified lubricant 3, modified epoxidized rape oil; and (iv) modified lubricant 4, modified PAO. The individual modified lubricants were further modified with 0%, 0.5%, 1%, and 2% content of nano-Schiff base copper complex (nano-SBCC). A microtribometer was used to evaluate the friction coefficient between ball/flat point contacts immersed in the modified lubricants and operated in reciprocating and linear sliding mode. A comparison of the values of the friction coefficient with the lubricants further modified with nano-SBCC with those of their individual 0% nano-SBCC counterparts indicated significant decrease: (i) almost 19.18% was obtainable for the modified lubricant 1 with 2% of nano-Schiff base copper complex, (ii) almost 16.5% was obtainable for the modified lubricant 2 with 0.5% of nano-Schiff base copper complex; (iii) almost 7.42% was obtainable for the modified lubricant 3 with 1% of nano-SBCC; and (iv) almost 7.01% was obtainable for the modified lubricant 4 with 0.5% of nano-SBCC. These suggested that the addition of nano-Schiff base copper complex can efficiently decrease the friction coefficient of epoxidized or esterified microbial oil. Analyses of two-dimensional images, average profiles (across the mid-section y = 0 of the reciprocating sliding path), and three-dimensional topographies by confocal white light microscope for the worn surfaces of flats immersed in modified lubricant 1 and modified lubricant 2 suggested better wear-resistance of the modified lubricant 2 than that of the modified lubricant 1. The ability of wear resistance for the modified lubricant became better with the increasing content of nano-Schiff base copper complex from 0% to 2%. The study revealed the modification of epoxidized microbial oil + rape oil (1:1 volume ratio) and esterified microbial oil + rape oil (1:3 volume ratio) with Cu(II) chelate of bis(salicylaldehyde)ethylenediamine, reducing the magnitude of friction and wear because of their respective wear self-repairing ability. Such self-repairing ability furnishes the suitability of epoxidized microbial oil or esterified microbial oil to be effectively modified by nano-Schiff base copper complex and to substitute ordinary base oil as a mixture with rape oil.     

Transient transition behaviors of fractional-order simplest chaotic circuit with bi-stable locally-active memristor and its ARM-based implementation

This paper proposes a fractional-order simplest chaotic system using a bi-stable locally-active memristor. The characteristics of the memristor and transient transition behaviors of the proposed system are analyzed, and this circuit is implemented digitally using ARM-based MCU. Firstly, the mathematical model of the memristor is designed, which is nonvolatile, locally-active and bi-stable. Secondly, the asymptotical stability of the fractional-order memristive chaotic system is investigated and some sufficient conditions of the stability are obtained. Thirdly, complex dynamics of the novel system are analyzed using phase diagram, Lyapunov exponential spectrum, bifurcation diagram, basin of attractor, and coexisting bifurcation, coexisting attractors are observed. All of these results indicate that this simple system contains the abundant dynamic characteristics. Moreover, transient transition behaviors of the system are analyzed, and it is found that the behaviors of transient chaotic and transient period transition alternately occur. Finally, the hardware implementation of the fractional-order bi-stable locally-active memristive chaotic system using ARM-based STM32F750 is carried out to verify the numerical simulation results.     

“蜡烛火焰划分”实验的局限成因分析及改进研究

人教版初中化学首个探究性实验"蜡烛及其燃烧"明确指出火焰的划分方法，但在实际教学中肉眼观察法和火柴梗燃烧法对蜡烛火焰的划分存在一定的局限性。采用文献研究法和实验验证法分析其局限性的成因——燃料的析炭能力强弱、材料结构的不同等，并提出相应的改进建议。     

A vectorial algorithm with finite element method for prediction of powder segregation in metal injection molding

The design of the mold and the choice of the injection parameters for metal injection molding (MIM) is required to maintain homogeneity of the filled mixture. However, powder segregation is unavoidable in MIM because of the significant difference in densities of the metallic powder and the polymer binder. To achieve an effective prediction of segregation effect, a biphasic model based on mixture theory is employed. The viscous behaviors of each phase and the interaction coefficient between the flows of the two phases should be determined. The solution of two coupled Navier–Stokes equations results in a tremendous computation effort. The previous development of an explicit algorithm makes the biphasic simulation much faster than that of the classic methods. However, it is strongly desired to reduce or even eliminate the numerous global solutions for pressure fields at each time step. Hence, a new vectorial algorithm is proposed and developed to perform the simulation only by vectorial operations. It provides the anticipated efficiency in the simulation of biphasic modeling, and the advantage to use the classic elements of equal‐order interpolations. Some results produced by the two algorithms are compared with the experimental values to validate the new vectorial algorithm. Copyright © 2012 John Wiley & Sons, Ltd.     

MASS SPECTROMETRIC FRAGMENTATION OF UNSYMMETRICALLY SUBSTITUTED METHYLPHOSPHONATE DIESTERS

Abstract

A series of structurally related unsymmetrically substituted methylphosphonate diesters have been synthesised and subjected to electron impact (El) mass spectral studies. These studies though aimed at total identification of the compounds, resulted in certain interesting observations and hence are being reported. In order to confirm the observations under electron impact and to support the mechanism of fragmentation we have also performed MSNS experiments in both daughter ion and parent ion modes.     

Use of 2, 3-Butanedione Monoxime for Homogeneous Precipitation of Nickel (II)

Abstract

The solid monoxime of 2, 3-butanedione is a more convenient material than liquid dione for the homogenous generation of DMG. 2, 3-butanedione dioxime. Determinations of Ni in steels and in pure Ni(II) solutions have shown the optimum pH and order of adding reagents. Gravimetric and/or an EDTA titrimetric finish are possible for a method of reliability within ± 0.2 mg of Ni in 50–150 mg Ni. The solid has the same character and filterability as that from the 1960 dione method of Salesin and Gordon¹.