Size-based analysis of incinerator fly ash using gravitational SPLITT fractionation, sedimentation field-flow fractionation, and inductively coupled plasma-atomic emission spectroscopy

Fly ash has been regarded as hazardous because of its high adsorption of toxic organic and/or inorganic pollutants. Fly ash is also known to have broad distributions of different chemical and physical properties, such as size and density. In this study, fly ash emitted from a solid waste incinerator was pre-fractionated into six sub-populations by use of gravitational SPLITT fractionation (GSF). The GSF fractions were then analyzed by sedimentation field-flow fractionation (SdFFF) and ICP–AES. SdFFF analysis showed the fly ash has a broad size distribution ranging from a few nanometers up to about 50 µm. SdFFF results were confirmed by electron microscopy. Inductively coupled plasma–atomic emission spectroscopy (ICP–AES) analysis of the GSF fractions showed the fly-ash particles contain a variety of inorganic elements including Ca, Si, Mg, Fe, and Pb. The most abundant in fly ash was Ca, followed by Si then Mg. No correlations were found between trace element concentration and particle size.     

粉煤灰空心微珠沸石化制备复合空心球

采用晶种静电吸附-诱导转化技术，成功地将选自工业废弃物粉煤灰的空心微 球转化为具有沸石/莫来石双层复合球壳结构的空心球，用XRD和SEM等手段对产物 进行了表征，并对球壳的转化机理进行了讨论。     

Application of a sequential extraction procedure to study the release of elements from municipal solid waste incineration bottom ash

The release of five elements (Cr, Cu, Mn, Pb and Zn) from a municipal solid waste incineration bottom ash (BA) under different extraction conditions has been investigated by performing the three-step sequential extraction procedure proposed by the Standards, Measurements and Testing Program of the European Union. A fourth step (strong acid attack) has been added in order to calculate the mass balance. The results of this study provide information on the potential mobility of the studied elements. Almost all of the Cr and part of the Mn are extracted with strong acid which indicates low potential mobility in the environment. Most of the Cu is extracted under oxidizing conditions. Pb and Zn are released under acidic condition, indicating the possibility of their mobilization by changes in pH. The reproducibility of the sequential extraction procedure is also discussed.     

Characteristics of major dioxin/furan congeners in melted slag of ash from municipal solid waste incinerators

Polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) in slag of fly ash from three municipal solid waste (MSW) incinerators were analyzed to observe any changes in characteristics and distribution of their congeners by melting process. Actual concentration and Toxic Equivalent (TEQ) concentration profiles of 17 major congeners of PCDDs/PCDFs for gas, fly ash and melted slag were compared. The distributions of PCDDs/PCDFs in different streams macroscopically showed similarities with the generally known profiles for emission gas from a municipal waste incinerator. The total concentrations of PCDDs/PCDFs in off-gas and fly ash have been known to be a function of incineration conditions and of air pollution control device utilization; however, their normalized distributions were independent of such conditions. The concentrations of PCDDs/PCDFs in the melted slag of fly ash were not related to the concentrations of PCDDs/PCDFs congeners in fly ash but were rather a function of the melting furnace type and operation. The total amount of PCDDs/PCDFs in the melted slag of fly ash contained almost 150–27,000 times less dioxin than that in fly ash, however, the TEQ of dioxin in the slag was reduced by 435–43,500 times, which could enable them to be utilized as recycled construction materials. In normalized TEQ concentration profiles of 17 congeners of PCDDs/PCDFs, the ratio of PCDFs to PCDDs changed from 1.32 to 2.19 by melting, which showed relatively higher portion of furans left in melted slag than those in fly ash. By comparing reduction ratios of different congeners, PCDDs (dioxins) were relatively easier to destruct than PCDFs (furans) during melting process. The most difficult congener to destruct could be octa-chlorinated dibenzofuran (OCDF) among major congeners. For slag cooling methods, dioxin concentration in TEQ of slow cooled slag by air was four times higher than that of fast cooled slag by water. Thus cooling by water is more appropriate with the added beneficial effect of producing granules/particles, which can be utilized as roadbed materials.     

Characterization and determination of 28 elements in fly ashes collected in a thermal power plant in Argentina using different instrumental techniques

Different techniques were selected for comprehensive characterization of seven samples of fly ashes collected from the electrostatic precipitator of the San Nicolás thermal power plant (Buenos Aires, Argentina). Particle size was measured using laser based particle size analyzer. X-ray diffraction powder (XRD) analysis and scanning electron microscopy (SEM) were used to characterize the mineral phase present in the matrix consisting basically of aluminosilicates and large amounts of amorphous material. The predominant crystalline phases were mullite and quartz. Major and minors elements (Al, Ca, Cl, Fe, K, Mg, Na, S, Si and Ti) were detected by energy dispersive X-ray analysis (EDAX). Trace elements (As, Cd, Co, Cr, Cu, Mn, Ni, Pb, Se, V and Zn) content was quantified by inductively coupled plasma optical emission spectrometry (ICP OES). Different acid mixtures and digestion procedures were compared for subsequent ICP OES measurements of the dissolved samples. The digestion procedures used were: i) a mixture of FH + HNO₃ + HClO₄ (open system digestion); ii) a mixture of FH + HNO₃ (MW-assisted digestion); iii) a mixture of HF and aqua regia (MW-assisted digestion). Instrumental neutron activation analysis (INAA) was employed for the determination of As, Ba, Co, Cr, Ce, Cs, Eu, Fe, Gd, Hf, La, Lu, Rb, Sb, Sc, Sm, Ta, Tb, Th, U and Yb. The validation of the procedure was performed by the analysis of two certified materials namely, i) NIST 1633b, coal fly ash and ii) GBW07105, rock. Mean elements content spanned from 41870 μg g^− 1 for Fe to 1.14 μg g^− 1 for Lu. The study showed that Fe (41870 μg g^− 1) ? V (1137 μg g^− 1) > Ni (269 μg g^− 1) > Mn (169 μg g^− 1) are the main components. An enrichment, with respect to crustal average, in many elements was observed especially for As, V and Sb that deserve particular interest from the environmental and human health point of view.     

Ammonium tetraphenylborate-naphthalene adsorbent for the preconcentration and trace determination of uranium in standard alloys and synthetic samples using 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol by fourth-derivative spectrophotometry

A solid ion-pair material produced from ammonium tetraphenylborate (ATPB) and naphthalene has been used for the preconcentration of uranium from the large volume of its aqueous complex samples. Uranium reacts with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol (5-Br-PADAP) to form a water insoluble, coloured complex. This complex is quantitatively retained on the ATPB-naphthalene adsorbent filled in a column in the pH range 7.0–9.5 and at a flow rate of 2 ml/min. The solid mass from the column is dissolved with 5 ml of dimethylformamide (DMF) and uranium is determined by fourth-derivative spectrophotometry. The calibration curve is linear over the concentration range of 0.13–15.0 g of uranium in 5 ml of the final DMF solution. Seven replicate determinations of 6 g of uranium gave a mean peak height (peak-to-peak signal between 592 nm and 582 nm) of 1.02 with a relative standard deviation of 0.95%. The sensitivity is 0.8419 (d⁴A/d⁴)/(g ml^–1) found from the slope of the calibration curve. The interference of a large number of anions and cations on the estimation of uranium has been studied and the method applied for the determination of uranium in coal fly ash, Zr-base alloy and some synthetic samples corresponding to standard alloys.     

Hydration Behaviour of Mixtures of Cement and Fly Ash with High Sulphate and Chloride Content

DTA/TG thermoanalytical investigations and X-ray diffractometry were carried out which demonstrate the effect of MSW fly ash on the hydration reactions of pozzolanic cement. The MSW fly ash has high content of calcium sulphate, alkali chlorides and heavy metals. During the first curing period the calcium aluminate reacts with the sulphate to form ettringite. In that period also the presence of syngenite is noted in the pastes. With the growth of the fly ash content of the mixture there is a lengthening of the period in which the hydration reactions of the calcium silicates are inhibited. Subsequently with the progress of hydration in the pastes the CSH phase develops and the formation of calcium chloroaluminate phase is observed. This revised version was published online in July 2006 with corrections to the Cover Date.     

煤灰熔融温度多项式模型的偏回归函数分析

为了考察煤灰中的化学组分对熔融特性温度的贡献，借助我国69种重要的商业用煤的灰熔融特性温度和灰中SiO2和Al2O3等6种主要化学组分的测试数据，利用多项式模型的偏回归函数分析方法，对煤灰的熔融特性温度进行一至四阶多项式模型回归分析，获得了各化学组分的偏回归函数。研究结果表明：各化学组分的偏回归函数能够表现熔融温度对应于该组分变化的趋势；同一组分偏回归函数不同，该组分对变形温度、软化温度和熔融温度的影响存在较大的差异；CaO和TiO2的偏回归函数反映熔融温度变化趋势的可信度最高。实验为进一步研究煤灰熔融特性温度的数学模型和参数选择提供参考。     

粉煤灰烧结坯体性能试验研究

研究粉煤灰粘土坯体的成型条件、烧结温度、最大粉煤灰掺量3个方面对坯体性能的影响，得到粉煤灰砖生产的最优方案，为粉煤灰砖的实际生产提供理论依据。     

GH矿粉对粉煤灰混凝土的增强效果

通过成型胶砂试件和混凝土试件，对提高大掺量粉煤灰高性能混凝土早期强度的方法进行了试验研究．试验所用的GH矿粉是以炼铁厂的工业炉尘为基料、配以若干种具有互补性能的化工原料经特殊处理复合而成的混凝土掺和料，GH矿粉和粉煤灰的用量分别为胶凝材料总量的10％～15％和20％～60％．研究结果表明，用GH矿粉和Ⅱ级粉煤灰复合作为掺和料，可显提高大掺量粉煤灰混凝土的强度，尤其是早期强度，其增强效果甚至优于硅灰．用240kg／m^3 42．5级普通硅酸盐水泥、240kg／m^3 Ⅱ级粉煤灰和60kg／m^3 GH掺和料，配制出了28d强度为106MPa的高性能粉煤灰混凝土，并使混凝土成本显降低．