改进的微波辅助无溶剂法提取薄荷和陈皮中的挥发油组分

An improved solvent free microwave extraction, in which a kind of microwave absorption medium （carbonyl iron powder） was used, was applied to the extraction of essential oil from dried menthol mint and orange peel without addition of any solvent and pretreatment. It took much less time of extraction （30 min） than microwave-assisted hydrodistillation （90 min） and conventional hydrodistillation （180 min）. The kinds of chemical compositions in essential oil extracted by different methods were almost the same and such improved solvent free microwave extraction can be a feasible way in extraction of essential oil from dried plant materials.     

Structural disorder in Ba0.6Sr0.4Al2O4

The structural disorder in Ba_0.6Sr_0.4Al₂O₄ (space group P6₃22) was investigated by X-ray powder diffraction and selected-area electron diffraction (SAED). The initial structural model was determined using direct methods, and it was further modified by the combined use of Rietveld method and maximum-entropy method (MEM). MEM-based pattern fitting method was subsequently applied, resulting in the final reliability indices of R_wp=9.61%, R_p=6.96%, R_B=1.40% and S=1.25. The electron density distribution was satisfactorily expressed by the split-atom model in which the strontium/barium and oxygen atoms were split to occupy the lower symmetry sites. The diffuse scattering in SAED was mainly attributable to the positional disorder of oxygen atoms.     

锂离子电池正极材料LiMn2O4的低热固相合成与性能表征

锂离子电池具有比能量高、环境污染小等优点,广泛应用于手提电话、便携式电脑、摄像机等设备中。其正极材料的研究是锂离子电池的研究重点。层状结构的LiCoO2、LiNiO2和尖晶石结构的LiMn2O4是仅有的三种能在3.5V以上电位可嵌入Li的正极材料[1~3]。目前市售的锂离子电池主要采用LiCoO2作正极材料,但由于Co资源缺乏和价格相对昂贵,而锰资源丰富,价格低廉且无毒,对环境友好,因此世界各国都在大力进行以LiMn2O4为正极材料的锂离子电池的实用化研究。LiMn2O4传统的制备方法是高温固相反应合成法[4~7],但由于Mn的变价多,与Li形成贫Li或…     

Synthesis, characterization and thermal properties of small R2R2NX-type quaternary ammonium halides

Twenty-one R₂R^′₂N⁺X⁻ -type (R=methyl or ethyl, R^′=alkyl, X=Br or I) quaternary ammonium (QA) halides have been prepared by using a novel one-pot synthetic route in which a formamide (dimethyl-, diethylformamide, etc.) is treated with alkyl halide in the presence of sodium or potassium carbonate. The formation of QA halides was verified with ¹H-NMR, ¹³C-NMR, MS and elemental analysis. The crystal structures of four QA halides (two bromide and two iodide) were determined using X-ray single crystal diffraction, and the powder diffraction method was used to study the structural similarities between the single crystal and microcrystalline bulk material. The thermal properties of all compounds were studied using TG/DTA and DSC methods. The smallest compounds decomposed during or before melting. The decreasing trend of melting points was observed when the alkyl chain length was increased. The liquid ranges of 120-180 °C were observed for compounds with 5-6 carbon atoms in the alkyl chain. The low melting points and wide liquid ranges suggest potential applicability of these compounds for example as ionic liquids precursors.     

WO3粉在高速层间剪切条件下的颗粒破碎特征

研究了WO3粉和W粉的剪切破碎时间对WO3粉和W粉的沉降曲线、平均粒度、BET比表面及松装密度的影响.用TEM和SEM对剪切破碎前后的粉末进行了直接观察.结果表明:新型剪切破碎机能有效地粉碎微米级WO3等脆性粉末,同时可以破坏超细W粉中的桥接团粒,使W粉和WO3粉的松装密度增加1倍以上,但对比表面积影响不大.     

化学法制备微米铜粉的研究

在NH3-NH4Cl体系中,以NH3为配合剂,利用铜自身的还原作用,通过岐化反应制备微米级铜粉,其中一定比例的铜粉粒度接近纳米级,在空气中相当稳定.NH3的浓度及pH值的控制对反应有重要影响,最佳反应条件是:反应温度为40℃,pH为11.4,NH 4的浓度为0.1mol·L-1,NH3的浓度为12.5mol·L-1;硫酸的浓度和酸化的时间影响产物的粒度,硫酸的质量分数为20%,加酸流速为4mL/min时,产物粒度最小.     

开放性尘源粉尘运动轨迹的数值计算

在对粉尘颗粒在大气中受力状况进行分析的基础上 ,采用颗粒随机轨道模型对尘源表面的粉尘在大气中的运动轨迹进行了数值计算 ,再现了野外现场观测的现象 ,从而证明了数值计算的可靠性 .利用ParticleSourceinCell算法 ,计算了由开放性粉尘造成的大气含尘质量分数 ,为定量预测露天矿粉堆料对环境造成的污染提供了依据 .     

纳米CaCO3粉体在聚合物HDPE中分散性和力学性能的研究

为了改善聚合物HDPE的强韧性，利用扫描电子显微镜、微机控制电子万能试验机和液晶式摆锤冲击试验机等研究了表面处理剂、增容剂对HDPE／CaCO3共混材料力学性能的影响。结果表明，用表面处理剂硬脂酸处理的纳米级CaCO3粉体对HDPE相界面粘接作用有一定的改善，纳米CaCO3粉体在基体HDPE中的均匀分散性得到改善；加入增容剂（HDPE—g—MAN）后使得HDPE／纳米CaCO3共混材料力学性能进一步提高，为HDPE／纳米CaCO3复合材料的设计和生产运用提供重要的理论依据。     

Cr-Fe-Mn粉末混合物的机械合金化及其磁交换作用

对主要成分为Cr72Fe18Mn10的粉末混合物进行机械球磨。采用扫描电子显微镜、X射线衍射仪和Mǒssbauer谱仪对球磨不同时间的样品的结构进行研究。研究结果表明：在球磨过程中，存在铁磁性的a—Fe及Fe基的超精细场分布组元和顺磁性的Cr基固溶体，球磨30h能形成顺磁性的纳米晶Cr-Fe-Mn合金；样品的矫顽力随球磨时间的延长先增加后减小，球磨12h时样品的矫顽力最大，为17．313kA／m；球磨样品在高于Cr的奈尔温度退火后场冷却时的矫顽力大于相应的零场冷却时的矫顽力，主要由体系中的铁磁-反铁磁交换作用所引起，其强弱随球磨时间的不同而不同。     

复合式鱼雷战斗部威力试验研究

该文分析了复合式鱼雷战斗部的结构和性能，结合模拟威力试验，验证了利用复合式鱼雷战斗部攻击抗爆能力强的大、中型潜艇的可行性，并提出了增强威力的具体措施，为进一步指导复合式鱼雷战斗部设计提供参考。