On the electrophoretic mobility and zeta potential of montmorillonite in non-aqueous media

Experimental results on the electrophoretic velocity and mobility of Ca-montmorillonite in 2-propanol are reported. The variation of the electrophoretic velocity with the externally applied electric field and the particle size range, at constant volume fraction and temperature, is considered. Given the difficulties for determining the types and concentrations of ions present in these liquid media, two methods are discussed for the estimation of the double layer thickness and hence the product, necessary for the determination of the zeta potential () of the interface. Although both methods of calculation yield different values of, the results for the zeta potential are very similar in the regions of and characteristic of our systems. The application to the experimental data of three theoretical relations between electrophoretic mobility and zeta potential is also discussed.     

Correlation analysis of quantum chemical data and the polarizability effect in H-complexes

The study is concerned with analysis of the energies of formation (E), frequency shifts (Δν) in IR spectra, ionization potentials (IP) of H-complexes, hydrogen bond lengths (r), and spin densities (sd) in H-complexes involving radical cations, obtained from quantum chemical calculations for 20 series of H-complexes. It was for the first time established that the E, IP, r, and sd values and the changes in enthalpy (δH) depend not only on the inductive and resonance effects but also on the polarizability effect of the substituents bound to the donor and acceptor centers in the H-complexes. Interrelations between the polarizability effect and the molecular structure of H-complexes are considered. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 602–608, April, 2006.     

Measuring Contact Angles at Copper Electrodes

Potential dependences of the angle of contact between perfluorodecaline C₁₀F₁₈ and copper, copper(I) sulfide, and copper telluride Cu₄Te₃ in 0.1 M CH₃COONa are measured. The data are in good agreement with the metal hardness measured in 1 M KOH. The uncharged-surface potentials (USP) for copper, copper(I) sulfide, and copper telluride equal 0.05–0.07, –0.02 to –0.04, and 0.05–0.07 V (NHE) in 0.1 M CH₃COONa. Studying the effect of Br^– ions shows that USP for copper and Cu₂S shift in, respectively, the negative and positive directions with an increase in [Br^–]. For copper telluride, USP shifts in the positive direction at low Br^– concentrations, and at NaBr concentrations in excess of 0.04 M, in the negative direction.     

Variable low-mass filtering using an electrodynamic ion funnel

An adjustable low-mass filter has been developed for an electrospray ionization (ESI) source to block ions associated with unwanted background species from entering the mass spectrometer. The low-mass filter is made by using an adjustable potential energy barrier from the conductance-limiting plate of an electrodynamic ion funnel, which prohibits species with higher ion mobilities from exiting the ESI source. We show that this arrangement provides a linear voltage adjustment for low-mass filtering from m/z 0 to 500. Mass filtering above m/z 500 is also performed; however, higher-mass species are attenuated. The mass filter was tested with a liquid chromatography/mass spectrometry (LC/MS) analysis of a bovine serum albumin (BSA) tryptic digest and resulted in the ability to block low-mass, background species, which accounted for 40-70% of the total ion current immediately behind the ESI source during peak elution and detection.     

Vergleichende Messungen des Zeta-Potentials von Faserstoffen durch Elektroosmose und Strömungsstrom/Strömungspotential

An apparatus for the determination of zetapotential is described, which allows measurement of both streaming potential and streaming current as well as electroosmosis with one and the same fiber diaphragm with various electrodes (calomel, Ag/AgCl, palladium). Measurements with glass fibers, fibers of polyacrylonitrile and of polyester, and with cellulose pulp show that identical values for the electrokinetic parameters are obtained independent of voltage applied during electroosmosis resp. pressure difference during streaming measurements. This allows the conclusion that the zetapotential in dilute electrolyte solution is here an unequivocally determinable figure.

Herrn Prof. Dr.R. C. Schulz mit den herzlichsten Glückwünschen zum 65. Geburtstag gewidmet.     

Solution of periodic Poisson's equation and the Hartree–Fock approach for solids with extended electron states: Application to linear augmented plane wave method

We formulate a Hartree–Fock‐LAPW method for electronic band structure calculations. The method is based on the Hartree–Fock–Roothaan approach for solids with extended electron states and closed core shells where the basis functions of itinerant electrons are linear augmented plane waves. All interactions within the restricted Hartree–Fock approach are analyzed and in principle can be taken into account. In particular, we obtained the matrix elements for the exchange interactions of extended states and the crystal electric field effects. To calculate the matrix elements of exchange for extended states, we first introduce an auxiliary potential and then integrate it with an effective charge density corresponding to the electron exchange transition under consideration. The problem of finding the auxiliary potential is solved by using the strategy of the full potential LAPW approach, which is based on the general solution of periodic Poisson's equation. Here, we use an original technique for the general solution of periodic Poisson's equation and multipole expansions of electron densities. We apply the technique to obtain periodic potentials of the face‐centered cubic lattice and discuss its accuracy and convergence in comparison with other methods. © 2002 Wiley Periodicals, Inc. Int J Quantum Chem, 2002     

Synthesis and properties of bis(heteroazulen-3-yl)methyl cations and bis(heteroazulen-3-yl)ketones

The synthesis and properties of a novel type of bis(heteroazulen-3-yl)methyl cations, bis(2-oxo-2H-cyclohepta[b]furan-3-yl)methyl cation salt and nitrogen analogues, (9a-c·PF₆⁻) and (9a-c·BF₄⁻), as well as bis(heteroazulen-3-yl)ketones (12a-d) are studied. The synthetic method was based on a TFA-catalyzed electrophilic aromatic substitution on the heteroazulenes (6a-d) with paraformaldehyde to afford the corresponding disubstituted methane derivatives 7a-d, followed by oxidative hydrogen abstraction with DDQ, and subsequent exchange of the counter-anion by using aq. HPF₆ or aq. HBF₄. In addition, the reaction of 7a-d with 2.2 equiv. amounts of DDQ afforded carbonyl compounds 12a-d. The delocalization of the positive charge of 9a-c was evaluated by the ¹H and ¹³C NMR spectral data. The thermodynamic stability of cations 9a-c was evaluated to be in the order 9a<9b<9c on the basis of their reduction potentials measured by cyclic voltammetry (CV) and pK_R+ values (2.6-10.3) obtained spectrophotometrically. The reduction waves of cations 9a-c were irreversible, suggesting the dimerization of the radical species generated by one-electron reduction. This was demonstrated by the reduction of 9a·BF₄⁻ with Zn powder to give dimerized product 14a. In addition, the quenching of 9a·BF₄⁻ with MeOH/NaHCO₃ gives ether derivative 15a, which is proposed for the precursor for synthesizing tris(heteroazulene)-substituted methyl cations bearing two different heteroazulene-units.     

Molecular mechanics (MM3) calculations on lithium amide compounds

The MM3 force field has been extended to deal with the lithium amide molecules that are widely used as efficient catalysts for stereoselective asymmetric synthesis. The MM3 force field parameters have been determined on the basis of the ab initio MP2/6-31G* and/or DFT (B3LYP/6-31G*, B3-PW91/6-31G*) geometry optimization calculations. To evaluate the electronic interactions specific to the lithium amides derived from the diamine molecules properly, the Lewis bonding potential term for the interaction between the lithium atom and the nonbonded adjacent electronegative atom such as nitrogen was introduced into the MM3 force field. The bond dipoles were evaluated correctly from the electronic charges on the atoms calculated by fitting to the electrostatic potential at points selected. The MM3 results on the molecular structures, conformational energies, and vibrational spectra show good agreement with those from the quantum mechanical calculations.     

The electronic structure of molecules by a many-body approach

The vertical valence ionization potentials of cyclopropane, ethylene oxide and ethylene imine are calculated by a many-body Green's function method. For C₃H₆ the ordering of the ionization potentials is 2e(), 1e(), 2a₁(), 1a₂(), 1e(). The assignment of the 2a₁ and the 1a₂ ionization potentials which has been controversial is thus clarified. The ordering is in agreement with the result obtained via Koopmans' theorem. For ethylene oxide and ethylene imine Koopmans' theorem fails in predicting the correct order of ionic states. For C₂H₄O the ordering of the ionization potentials is 2b ₁(), 4a ₁, 1a ₂(), 2b ₂,3a ₁, 1b ₁(), 1b ₂, 2a ₁ and for C₂H₅N 6a, 5a, 3a, 2a, 4a, 3a, 1a, 2a. The agreement of the computed ionization potentials with the experimental values is very satisfactory.     

α-Al2O3纳米粒子对Co-Ni合金异常共沉积电化学行为的影响

为了研究在电化学复合共沉积过程中,惰性纳米粒子和金属离子、电极表面的相互作用,以及由此产生的对合金电化学共沉积行为的影响.本文从两个吸附过程出发: 电解液中的金属离子和H＋在纳米粒子表面的吸附；纳米粒子迁移到阴极表面,在电极表面的吸附.采用Zeta电势和稳态极化以及电化学交流阻抗（EIS）研究了纳米Al2O3粒子和电解液中的金属离子，和电极表面的相互作用,进而分析了纳米粒子对Co2＋和Ni2＋还原沉积的影响规律.通过对阻抗数据的拟合,讨论了Al2O3纳米粒子对等效电路中各物理参数的影响.在H＋和不同金属离子在纳米粒子上发生竞争吸附的基础上,提出了纳米粒子和合金共沉积的可能反应历程.