Poly(phenylene oxide) copolymer anion exchange membranes

Poly(phenylene oxide) block and random copolymers are synthesized by oxidative polymerization of 2,6-dimethylphenol and 2,6-diphenylphenol for potential alkaline exchange membrane application. The copolymers are functionalized on the methyl substituted repeat units through a two-step process to produce pendent quaternary ammonium cationic groups. The amount of quaternary ammonium cations and the ion exchange capacity are quantified through titration measurements. Ionic conductivity of the copolymer membranes is measured by electrochemical impedance spectroscopy. Block copolymers show increased bromide conductivity at higher ion exchange capacities compared with the random copolymer analogs. The bromide conductivity for a block copolymer film with an ion exchange capacity of 1.27 mequiv/g reaches 26 mS/cm at 90 °C and 95% relative humidity. The hydroxide conductivity for the same film was measured to be 84 mS/cm at 80 °C and 95% relative humidity. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013, 51, 1770–1778, 2013     

Easy and effective method to produce functionalized particles for cellular uptake

In this contribution, a versatile approach for the synthesis of functionalized particles for drug delivery is presented, using two nonaggressive standardized procedures. The first procedure considered is the functionalization of an azido‐terminated α‐norbornenyl poly(ethylene oxide) (PEO) macromonomer with an alkyne‐containing active molecule via the copper catalyzed azide alkyne cycloaddition, click type reaction. The functionalized macromonomer is then polymerized by Ring‐Opening Metathesis Polymerization (ROMP) in dispersion to form functionalized particles. The second procedure consists in synthesizing particles by ROMP in dispersed media of norbornene with azido‐terminated α‐norbornenyl PEO macromonomer. The ROMP was initiated by the first generation Grubbs catalyst. Such functionalized core‐shell particles have stealthy properties due to their PEO shell and can be viewed as universal nanocarriers on which any alkyne‐modified active molecule can be grafted by click chemistry. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Frequency‐dependent NMR relaxation of liquids confined inside porous media containing an increased amount of magnetic impurities

Frequency‐dependent NMR relaxation studies have been carried out on water (polar) and cyclohexane (nonpolar) molecules confined inside porous ceramics containing variable amounts of iron oxide (III). The porous ceramics were prepared by compression of powders mixed with iron oxide followed by thermal treatment. The pore size distribution was estimated using a technique based on diffusion in internal fields that exposed a narrow distribution of macropore sizes with an average pore dimension independent of iron oxide content. The relaxation dispersion curves were obtained at room temperature using a fast field cycling NMR instrument. They display an increase of the relaxation rate proportional to the iron oxide concentration. This behavior is more prominent at low Larmor frequencies and is independent of the polar character of the confined molecules. The results reported here can be fitted well with a relaxation model considering exchange between molecules in the close vicinity of the paramagnetic centers located in the surface and bulk‐like molecules inside the pores. This model allows the extraction of the transverse diffusional correlation time that can be related to the polar character of the confined molecules. Copyright © 2013 John Wiley & Sons, Ltd.     

Coral reef-like polyanaline nanotubes prepared by a reactive template of manganese oxide for supercapacitor electrode

Coral reef-like PANI nanotubes composed of nanopaticles were successfully synthesized by a reactive template of manganese oxide.The structure was characterized by using SEM,TEM,and FT-IR,and the supercapacitive behaviors of these nanotubes were investigated with cyclic voltammetry（CV）,and charge-discharge tests,respectively.A maximum specific capacitance of 533 F/g could be achieved in 1mol/L aqueous H₂SO₄ with the potential range of -0.2 to 0.8 V（vs.the saturated calomel electrode） in a half-cell setup configuration for PANI electrode,suggesting its potential application in the electrode material for electrochemical capacitors.     

喷涂角度对螺栓表面涂层厚度均匀性的影响

针对工程中采用铝涂料涂覆螺栓时螺栓表面铝涂层易出现的厚度不均匀问题,研究喷涂角度对螺栓表面涂层均匀性的影响规律。对喷涂系统的喷嘴和螺栓进行建模,通过计算流体动力学仿真软件Fluent建立了雾化流场的气液两相流物理模型,使用DPM模型分析了流场中气相和液相的相互作用,获得了在不同角度下的喷涂流场,预测了螺栓表面液膜沉积厚度。搭建了喷涂试验系统并与模拟结果进行了验证,模拟和试验研究均表明在喷涂角度为30°时螺栓表面涂层均匀性最佳。     

钎焊后自然时效对3003/6xxx/3003复合铝合金性能和组织的影响

以6xxx系铝合金为芯材,3003铝合金为两侧皮材,经熔炼、铸造、复合、热轧、冷轧及成品退火制备了厚度为1.5 mm的3层复合铝合金。在600 ℃下模拟钎焊,经空冷后进行1、5、10、15、20、25、30 d的自然时效。结果显示：复合铝合金的强度、维氏硬度在自然时效初期快速增加,20 d后上升缓慢,30 d时抗拉强度、屈服强度、芯材维氏硬度达到最大,分别为242.3 MPa、122.9 MPa、84.0;芯材晶粒尺寸钎焊后较钎焊前略微长大,经不同自然时效时间的芯材晶粒平均尺寸大小相当,表明自然时效不改变芯材晶粒的大小;钎焊后以及经自然时效之后芯材中标识出的第二相为不规则的AlFeSiMnCu相。     

Bi掺杂O3型NaNi0.5Mn0.5O2钠离子电池层状正极材料的制备与储钠性能

O3型NaNi_0.5Mn_0.5O₂拥有高理论比容量且易于制备,是商业钠离子(Na⁺)电池的首选正极材料之一,但其循环稳定性仍面临挑战。利用Bi对NaNi_0.5Mn_0.5O₂进行改性。研究发现,Bi的引入可以在晶粒生长过程中通过调节表面能实现晶粒细化,并且Bi的掺杂增加了层状正极材料的晶胞参数,为Na⁺提供了宽的扩散通道,提高了Na⁺的扩散能力,优化了Na⁺在脱嵌过程中的可逆性。改性后的NaNi_0.495Mn_0.5Bi_0.005O₂实现了在2.0～4.0 V的电势区间内0.2 C倍率下的可逆容量为138.1 mAh/g,在5 C倍率下循环100圈后容量保持率可以达到97%。     

Synthesis of Acrylamide Molecularly Imprinted Polymers Immobilized on Graphite Oxide through Surface-Initiated Atom Transfer Radical Polymerization

A novel acrylamide (AA) molecularly imprinted polymer was synthesized by atom transfer radical polymerization (ATRP) on graphite oxide (GO) particles. Propionamide (PAM) was used as a dummy template molecule, hydroxy ethyl acrylate (HEA) as a functional monomer, ethylene glycol dimethacrylate (EDMA) as a crosslinking agent, and acetonitrile as both solvent and dispersion medium. Scanning electron microscopy (SEM) images and infrared spectroscopy (IR) confirmed that the molecularly imprinted polymers (MIP) were successfully grafted onto the surface of the GO particles. The corresponding adsorption kinetic curves and adsorption isotherms showed that the AA adsorption reached equilibrium after 5 h, with large amounts of AA being adsorped in the first 100 min. The maximum AA adsorption capacity was 123.48 µmol g^?1 according to Scatchard analysis, which indicated that the MIP possesses good AA adsorption capacity. This MIP-GO material was used to selectively determine AA in fried food samples.