Side‐chain crystallization behavior of graft copolymers consisting of an amorphous main chain and crystalline side chains. II. Poly(n‐hexyl methacrylate)‐graft‐poly(ethylene glycol)

The phase behavior and crystallization of graft copolymers consisting of poly(n‐hexyl methacrylate) (PHMA) as an amorphous main chain and poly(ethylene glycol) (PEG) as crystallizable side chains (HMAx with 15 ≤ x ≤ 73, where x represents the weight percentage of PEG) were investigated. Small‐angle X‐ray scattering profiles measured above the melting temperature of PEG suggested that a microdomain structure with segregated PHMA and PEG domains was formed in HMA40 and HMA46. This phase behavior was qualitatively described by a calculated phase diagram based on the mean‐field theory. Because of the segregation of PEG into microdomains, the crystallization temperature of the PEG side chains in HMAx was higher than that in poly(methyl acrylate)‐graft‐poly(ethylene glycol) having a similar value of x, which was considered to be in a disordered state above the melting temperature. In HMAx with x ≤ 40, PEG crystallization was strongly restricted, probably because the PEG microdomains were isolated in the PHMA matrix. As a result, the growth of PEG spherulite was not observed because the PEG crystallization occurred after vitrification of the PHMA segregated domains. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 129–137, 2007     

Ethylene polymerization by novel Ziegler–Natta‐type catalysts obtained in situ by the oxidative addition of 8‐hydroxyquinoline‐based ligands to bis(1,5‐cyclooctadiene)nickel(0) and methylaluminoxane

Novel catalytic systems, prepared in situ by the oxidative addition of 8‐hydroxyquinoline ligands to bis(1,5‐cyclooctadiene)nickel(0) and activated by methylaluminoxane, were studied in ethylene polymerization. When 8‐hydroxyquinoline was employed, only oligomeric products were obtained. On the contrary, 5,7‐dinitro‐8‐hydroxyquinoline gave linear polyethylene (PE), but with a modest activity. For the catalyst based on 5‐nitro‐8‐hydroxyquinoline, the productivity was largely dependent on the content of free trimethylaluminum (TMA) present in the commercial aluminoxane. The progressive optimization of the TMA/oligomeric methylaluminoxane ratio increased the productivity, which reached 700 kg of PE/(mol of Ni × h), by an order of magnitude. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 200–206, 2006     

Synthesis and micellization of amphiphilic poly(sebacic anhydride)–poly(ethylene glycol)–poly(sebacic anhydride) block copolymers

Amphiphilic biodegradable block copolymers [poly(sebacic anhydride)–poly(ethylene glycol)–poly(sebacic anhydride)] were synthesized by the melt polycondensation of poly(ethylene glycol) and sebacic anhydride prepolymers. The chemical structure, crystalline nature, and phase behavior of the resulting copolymers were characterized with ¹H NMR, Fourier transform infrared, gel permeation chromatography, and differential scanning calorimetry. Microphase separation of the copolymers occurred, and the crystallinity of the poly(sebacic anhydride) (PSA) blocks diminished when the sebacic anhydride unit content in the copolymer was only 21.6%. ¹H NMR spectra carried out in CDCl₃ and D₂O were used to demonstrate the existence of hydrophobic PSA domains as the core of the micelle. In aqueous media, the copolymers formed micelles after precipitation from water‐miscible solvents. The effects on the micelle sizes due to the micelle preparation conditions, such as the organic phase, dropping rate of the polymer organic solution into the aqueous phase, and copolymer concentrations in the organic phase, were studied. There was an increase in the micelle size as the molecular weight of the PSA block was increased. The diameters of the copolymer micelles were also found to increase as the concentration of the copolymer dissolved in the organic phase was increased, and the dependence of the micelle diameters on the concentration of the copolymer varied with the copolymer composition. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1271–1278, 2006     

Mathematical modeling of crystallization analysis fractionation (Crystaf) of polyethylene

Four polyethylene samples (PE) with different molecular weight distributions (MWD) were analyzed by crystallization analysis fractionation (Crystaf) at several cooling rates to investigate the effect of MWD and cooling rate on their Crystaf profiles. Using these results, we developed a mathematical model for Crystaf that considers crystallization kinetic effects, which are ignored in all previous Crystaf models. The Crystaf model we proposed can fit the experimental Crystaf profiles of the 4 polyethylene resins very well. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2749–2759, 2006     

Slow crack growth in blends of HDPE and model copolymers

The resistance to slow crack growth (SCG) was measured in binary blends of high density polyethylene (HDPE) and 5–10% concentrations of model ethylene-butene random copolymers by measuring the time to failure (t_f) under a constant stress intensity. An increase of t_f with the addition of the copolymer if the copolymer could crystallize and the increase was greater the higher branch density. The copolymer with 117 branches/1000C could not crystallize and therefore its blend had a t_f that was less than that of the HDPE. The fracture energies of the blends as determined by their resistance to SCG were compared with the energy by rapid fracture, J_c, as previously measured by Rhee and Crist. It is concluded that SCG is more sensitive to variations in the microstructure than is rapid fracture and that the differences in SCG behavior can be qualitatively explained in terms of the differences in microstructure of the blends. ©1995 John Wiley & Sons, Inc.     

Morphologies of microporous polyethylene and polypropylene crystallized from solution in supercritical propane

The morphologies of solvent-free, microporous, mechanically self-supporting cylinders of linear polyethylene and isotactic polypropylene, crystallized from solution in supercritical propane, were examined by an SEM technique. The morphology of gels (or foams), obtained with little or no shrinkage from 2% to 35% solutions by weight of polyethylene (99% to 85% porosities), is shown in some detail. Lamellae with very little or considerable mutual organization occur, often in the form of stacks with straight or coiled axes (axialites). Further growth of these can lead to particles with a roughly spherical overall shape and a predominantly radial orientation of the lamellae at the particle surface. Subcooled isotactic polypropylene, on the other hand, crystallizes in the form of perfectly shaped birefringent microspheres of very uniform size. ©1995 John Wiley & Sons, Inc.     

Vacuum Ultraviolet Photolysis of Polyethylene,Polypropylene, and Polystyrene

Using infrared reflection absorption spectroscopy (IRRAS), quartz crystal microbalance (QMB) measurements, and X-ray photoelectron spectroscopy (XPS) in combination with chemical derivatization techniques the VUV photolysis of polyethylene (PE), polypropylene (PP), and polystyrene (PS) was investigated. A mass balance obtained from the quantification of the data was used to suggest reaction path ways. Although PE and PP behave similar, the mass loss is about 8 times higher in the case of PP. These differences originate from the higher disproportionation to recombination ratio for the branched polymer. Both polymers form double bonds and at extended treatment times they tend to crosslink. PS is rather stable due to the possibility of the energy dissipation by fluorescence.     

Effect of PEG on the crystallization of PPDO/PEG blends

A new biodegradable polymer system, poly(p-dioxanone) (PPDO)/poly(ethylene glycol) (PEG) blend was prepared by a solvent casting method using chloroform as a co-solvent. The PPDO/PEG blends have different weight ratios of 95/5, 90/10, 80/20 and 70/30. Crystallization of homopolymers and blends were investigated by differential scanning calorimetry (DSC) and wide-angle X-ray diffraction (WAXD). When 5% of PEG was blended, the crystallization exothermal peaks (T_c) of PPDO increased sharply and the crystallization exothermal peaks (T_c) of PEG decreased slightly compared with the homopolymers. The crystallization rates of both components increased, and caused greater relative crystallization degree (X_t%). But when the content of PEG was more than 5%, the crystalline behaviors of blends had no more significant changes accordingly. The melting points of each sample varied little over the entire composition range in this study. The nonisothermal crystallization of PPDO homopolymer and blend (PPDO/PEG = 70/30) were also studied by DSC. The crystallization began at a higher temperature when the cooling rates were slower. The nonisothermal crystallization kinetics of blends was analyzed by Ozawa equation. The results showed that the Ozawa equation failed to describe the whole crystallization of the blend, but Mo equation could depict the nonisothermal crystallization perfectly.     

Study and characterization of virgin and recycled LDPE/PP blends

Recycling of mixed plastic wastes composed of low-density polyethylene (LDPE) matrix and polypropylene (PP) was carried out by compounding using single-screw or twin-screw extruders. Blends of virgin polymers have been prepared to compare mechanical properties of both virgin and regenerated materials. First, a model composition of virgin LDPE/PP blend was prepared to study the effect of process parameters and that of different types of compatibilizers. Second, the results were applied to plastic wastes coming from industrial post-consumer plastic wastes. By adding compatibilizing agents such as ethylene-propylene-diene monomer, ethylene-propylene monomer, or PE-g-(2-methyl-1,3-butadiene) graft copolymer, elongation at break and impact strength were improved for all blends. The effect of these various copolymers is quite different and is in relation with their chemical structure. The recycled blends exhibit suitable properties leading to applications that require good mechanical properties.