Rebuilding of metal components with laser cladding forming

Laser cladding forming (LCF) is a novel powerful tool for the repairing of metal components. Rebuilding of V-grooves on medium carbon steel substrates has been carried out with laser cladding forming technique using stainless steel powder as the cladding material. Microstructure of the deposited layers has been characterized using optical microscopy (OM), scanning electron microscopy (SEM), energy dispersive X-ray microanalysis (EDAX), electron probe microanalysis (EPMA) and X-ray diffraction (XRD). Mechanical properties of the rebuilt V-groove samples have been evaluated by tensile and impacting tests and microhardness measurement. Experimental results show that good fusion bonding between the rebuilt layers and the substrate has been formed, and the microstructure of the cladding layers is mainly composed of fine, dense and defect-free epitaxial columnar dendrites. Due to the effect of grain size refinement, the tensile strength, impacting toughness, elongation and microhardness of the rebuilt samples have been greatly enhanced compared to those of the substrate. Microhardness is also very uniform throughout the rebuilt regions. With the growth of the deposited layers, the microhardness increases gradually. The good ductility of the deposited regions is verified by the SEM fracture analysis.     

Thermal properties of poly(styrene) containing brominated aryl phosphate additives

General purpose poly(styrene) is a large volume commodity polymer widely used in a range of applications. For many of these the presence of an additive to impart some flammability resistance is required. Most commonly, brominated aromatics are used for this purpose. As the polymer undergoes combustion these compounds decompose to generate bromine atoms and/or hydrogen bromide which escape to the gas phase and trap flame propagating radicals. While these species are effective in inhibiting flame propagation they present the opportunity for loss of halogen to the atmosphere. For this reason, the use of these compounds is being limited in some parts of the world. Phosphorus compounds, on the other had, impart a flame retarding influence by promoting char formation at the surface of the burning polymer. This prevents heat feedback to the polymer and consequent pyrolysis to generate fuel fragments. The combination of both bromine and phosphorus present in a single compound might generate a superior flame-retarding additive in that both modes of retardancy might be promoted simultaneously. Should this be the case smaller amounts of additive might be necessary to achieve a satisfactory level of flame retardancy. A series of such additives, brominated aryl phosphates, has been synthesized and fully characterized spectroscopically. Blends of these additives, at various levels, with poly(styrene) have been examined by DSC, TG and in the UL-94 flame test. The flammability of the polymer is dramatically diminished by the presence of the additive.     

A procedure for measuring the flexibility of single wood-pulp fibres

A way of determining the flexibility of wood-pulp fibres is developed, which involves i) a precise measurement of the topology of single-fibres by using a confocal laser scanning microscope and ii) the measurement of the elastic modulus of the fibres by using a single-fibre fatigue cell. Reported in this paper are the initial results of tests carried out on black spruce fibres, which have been subjected to three different levels of mechanical refining energy, namely ∼1100, 2300, and 3500 kWh/t. It is found that the fibre flexibility rises significantly between the first and second energy levels, but it does not change to the same degree between the second and third ones. The described procedure of measuring the flexibility of fibres may be used to establish the appropriate refiner energy necessary for the production of a specific grade of paper. Russian translation published in Mekhanika Kompozitnykh Materialov, Vol. 42, No. 1, pp. 115–128, January–February, 2006.     

具有HfN/HfO2栅结构的p型MOSFET中的负偏置-温度不稳定性研究

研究了HfN/HfO₂高K栅结构p型金属-氧化物-半导体(MOS)晶体管(MOSFET)中，负 偏置-温度应力引起的阈值电压不稳定性(NBTI)特征.HfN/HfO₂高K栅结构的等效 氧化层厚度(EOT)为1.3nm，内含原生缺陷密度较低.研究表明，由于所制备的HfN/HfO₂ 高K栅结构具有低的原生缺陷密度，因此在p-MOSFET器件中观察到的NBTI属HfN/HfO2高K栅结构的本征特征，而非工艺缺陷引起的；进一步研究表明，该HfN/HfO₂高K栅结构中观察到的NBTI与传统的SiO₂基栅介质p-MOSFET器件中观察 到的NBTI具有类似的特征，可以被所谓的反应-扩散(R-D)模型表征： HfN/HfO₂ 栅结构p-MOSFET器件的NBTI效应的起源可以归为衬底注入空穴诱导的界面反应机理，即在负 偏置和温度应力作用下，从Si衬底注入的空穴诱导了Si衬底界面Si-H键断裂这一化学反应的 发生，并由此产生了Si^＋陷阱在Si衬底界面的积累和H原子在介质层内部的扩散 ，这种Si^＋陷阱的界面积累和H原子的扩散导致了器件NBTI效应的发生. 关键词： 高K栅介质 负偏置-温度不稳定性(NBTI) 反应-扩散(R-D)模型     

流媒体技术在继续教育平台中的应用

在阐述了流媒体技术的基本原理的基础上，通过对主流技术的分析比较提出了以WindowsMedia为技术支撑，基于组播和点播的流媒体继续教育平台解决方案，并对资源的同步控制和安全策略作简要分析，实现一个功能丰富的继续教育平台．     

Cu（Ⅱ） effect on the conformation of regenerated silk fibroin in dilute aqueous solution

Much attention has been paid to the natural mechanism of silkworm spinning due to the impressive mechanical properties of the natural fibers. In this work, we studied the effect of Cu（Ⅱ） ions on the secondary structure of Bombyx mori regenerated silk fibroin （SF） in dilute solution by circular dichroism （CD）. The results indicate that a given amount of Cu（Ⅱ） induces the SF conformational transition from random coil to β-sheet, however, further addition of Cu（Ⅱ） is unfavorable for this conversion. Meanwhile, the conformational changes induced by Cu（Ⅱ） follow a nucleation-dependent aggregation mechanism, which is similar to that found in Prion protein （PrP） denaturation and Aβ-peptide aggregations, leading to the neurodegenerative disease. This work would help one understand further the natural spinning process of silkworm. Additionally, it would be significant for the study of the nervous system diseases, because silk fibroin, extracted in large amounts from Bombyx mori silkworm gland, could be a proper model to study PrP denaturation and Aβ-peptide aggregations.     

高精度步进压印机热误差的建模分析

为了消除由紫外光曝光所引起的步进压印机的热误差，以提高压印机的套刻对准精度，运用逐步回归分析法选取了压印机上温度测量点的数量，将压印机上布置的温度传感器从15个减少到6个，并建立了压印机温度测量关键点处的温度与压头在x、z方向热误差关系的数学模型．实验结果与模型计算结果的对比分析表明，模型的热误差预测精度在x方向可以达到899／6，而在z方向可以达到939／6．应用表明，该方法是一种在压印机热误差建模中选择温度测量关键点的有效方法，可避免热误差建模过程中的变量耦合问题，从而提高了模型的精确性．     

基于CTV100平台的DPTV系统的研究与实现

从硬件和软件两方面详细阐述了基于CTV100平台的DPTV系统,并给出了总体设计框图和设计流程图。本项目采用意法半导体公司(ST)的CTV100解决方案,实现了对传统模拟电视信号的高效数字域处理,显著提高了电视画面的图像质量;并通过采用基于32bitCPU的OS20嵌入式操作系统,实现了多种传统模拟电视无法实现的功能。     

仿射Weyl群(E～)6的a值5的左胞腔

Coxeter群的胞腔是1979年Kazhdan和Lusztig中定义的，这些胞腔理论在代数群的表示理论中发挥了重要的作用。对一些特殊的情况，胞腔的分类已经明确地给出了，例如，对于秩为2的群参见，对于An^-参见，对于a值4的典范型和或参见.本文利用时俭益的运算算法给出了仿射Weyl群E6^-的a值等于5的所有左胞腔。