功能性丙烯酸/MBAM体系共聚产物的研制

以丙烯酸和MBAM为主要原料，经聚合，合成了一种高性能的具有良好保水性能的聚合产物，其保水量达到750～1000倍．50℃以下有良好的保水性能，28℃以下有极好的保水性能，并研究了工艺条件对该产品性能的影响因素．     

The Three-component One-pot Synthesis of 4,6-Diarylpyrimidin-2(1h)-ones and 9-Phenyl-8-oxa-10,12-diaza-tricyclo[7.3.1.0~(2,7)]trideca-2(7),3,5-trien-11-one

1 Results Pyrimidinones (PMs) are a class of important heterocycles which have been well documented throughout the literature due to their biological importance. They exhibit a wide range of pharmaceutical and therapeutic properties[1].A rapid and efficient one-pot method for the synthesis of 4,6-diarylpyrimidin-2(1H)- ones and related heterocycles is described.The condensation of acetophenone derivatives,aldehydes and urea in the presence of sulfamic acid was employed to synthesize a variety of pyrimid...     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶 凝胶法以磷钼酸 (MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2 催化剂 .使用ICP、XRD、TG DTA、IR、TPD MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能 .杂多钼酸盐与TiO2 通过O2 -在TiO2 表面发生了键合 .在 6 2 3K下 ,杂多阴离子仍保持原有的Keggin结构 .CO2 在Lewis酸位Ni(Ⅱ )和Lewis碱位Ni-O -Mo的桥氧协同作用下生成CO2 卧式吸附态Ni(Ⅱ )←O - (CO)← (O--Ni) .丙烯有多种吸附态在催化剂上吸附 .在 5 6 3K、1MPa和空速 15 0 0h-1的反应条件下 ,丙烯的摩尔转化率为 3.2 % ,产物MAA选择性为 95 % .     

An Improved Synthesis of Retinoic Acid from β-Ionone

A convenient and large-scale preparation of retinoic acid 1 from β-ionone in five steps with 38% overall yield is described.The key steps are the epoxidization of 2 with a new methylated agent and the condensation 4 with tetraethyl methylenediphophonate in one-pot procedure to prepare 6.     

Microwave‐improved polymerization of ϵ‐caprolactone initiated by carboxylic acids

The ring‐opening polymerization of ε‐caprolactone (ε‐CL), initiated by carboxylic acids such as benzoic acid and chlorinated acetic acids under microwave irradiation, was investigated; with this method, no metal catalyst was necessary. The product was characterized as poly(ε‐caprolactone) (PCL) by ¹H NMR spectroscopy, Fourier transform infrared spectroscopy, ultraviolet spectroscopy, and gel permeation chromatography. The polymerization was significantly improved under microwave irradiation. The weight‐average molecular weight (M_w) of PCL reached 44,800 g/mol, with a polydispersity index [weight‐average molecular weight/number‐average molecular weight (M_w/M_n)] of 1.6, when a mixture of ε‐CL and benzoic acid (25/1 molar ratio) was irradiated at 680 W for 240 min, whereas PCL with M_w = 12,100 and M_w/M_n = 4.2 was obtained from the same mixture by a conventional heating method at 210 °C for 240 min. A degradation of the resultant PCL was observed during microwave polymerization with chlorinated acetic acids as initiators, and this induced a decrease in M_w of PCL. However, the degradation was hindered by benzoic acid at low concentrations. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 13–21, 2003     

制备介孔复合环境材料的酸洗刻蚀工艺

探索了一种制备介孔复合环境材料的方法--破坏式造孔与有机复合相结合,使最终产品可大量吸附污染水体中的各种污染物并具有一定的杀菌功能.该方法通过酸洗刻蚀,达到了去除原材料中的杂质和刻蚀孔径的目的,所制备的中间产品24h吸湿率为原材料的2倍,染料吸附量为原材料的1.6倍.     

The role of variable surface charge and surface complexation in the adsorption of humic acid on magnetite

The ionic strength dependence of humic acid (HA) adsorption on magnetite (Fe₃O₄) was investigated at pH 5, 8 and 9, where variable charged magnetite is positive, neutral and negative, respectively. The adsorption studies revealed that HA has high affinity to magnetite surface especially at lower pH, where interacting partners have opposite charges. However, in spite of electrostatic repulsion at pH 9 notable amounts of humate are adsorbed. Increasing ionic strength enhances HA adsorption at each pH due to charge screening. The dominant interaction is probably a ligand-exchange reaction, nevertheless the Coulombic contribution to the organic matter accumulation on oxide surface is also significant under acidic condition. The results from size exclusion chromatography demonstrate that the smaller size HA fractions enriched with functional groups are adsorbed preferentially on the surface of magnetite at pH 8 in dilute NaCl solution.     

副品红共振光散射法测定脱氧核糖核酸

本文基于脱氧核糖核酸 (DNA)对有机染料副品红的共振光散射的增强效应 ,拟定了一种测定DNA的共振光散射法。在pH =0 5～ 1 5范围内 ,有机染料副品红于 35 5nm处的共振光散射强度被DNA强烈增强 ,且增强程度与DNA浓度呈线性关系 ,线性范围为 0 10～ 15 μg·mL- 1 ,检出限可达 36ng·mL- 1 。该方法简便、快速、具有较高的灵敏度和准确度 ,且线性范围较宽。将该方法用于混合样品中DNA的测定 ,结果令人满意。     

生物小分子与铜锌超氧化物歧化酶相互作用的波谱学研究及其应用

本工作以ESR和NMR为主要手段,并结合其它生化方法,考察了氨基酸、核酸碱基、糖等生命基本物质,和抗坏血酸等生命必需物质与钢锌超氧化物歧化酶的相互作用,实验观测到氨基酸、核酸碱基和抗坏血酸在水溶液中可以与酶中的Cu²⁺作用而使其脱离活性部位,以小分子络合物形式游离在溶液中,同时使酶失活,脱离活性部位的Cu²⁺的比例和酶的失活程度取决于小分子配体的加入量及其与Cu²⁺的络合能力。此外,首次尝试使用ESR方法,并借助氨基酸与酶的作用,考察了铜锌超氧化物歧化酶在盐酸胍变性和热变性过程中的构象变化行为,结果表明这一方法是直观而有效的。