组合荷载作用下腐蚀缺陷管道的极限承载力

腐蚀缺陷的存在会降低管道的承载力,影响管道的正常运行.考虑了管道轴向与环向材料强度的各向异性,提出了腐蚀缺陷压力管道在内压、轴力和弯矩组合荷载作用下极限承载力的一组广义解.推导了等深度腐蚀、椭圆腐蚀和抛物线三种形状腐蚀缺陷管道的解析解.通过算例验证了解析解与广义解结果具有很好的吻合性.腐蚀形状对极限承载力有显著影响,把...     

简支梯形底扁球壳弯曲问题的准格林函数方法

以简支梯形底扁球壳的弯曲问题为例,详细阐明了准格林函数方法的思想.即利用问题的基本解和边界方程构造一个准格林函数,这个函数满足了问题的齐次边界条件,采用格林公式将简支扁球壳弯曲问题的控制微分方程化为两个互相耦合的第二类Fredholm积分方程.边界方程有多种选择,在选定一种边界方程的基础上,可以通过建立一个新的边界方程...     

评价矿井突水危险性的关键层方法

将煤层底板至含水层间承载能力最大的一层岩层看作起阻水作用的关键岩层（简称关键层）,并把它简化为薄板,利用板的理论解确定该岩层的破断跨距,用以评价底板突水的危险性．实例分析表明,这种预测突水危险性的方法是简明有效的．     

THREE-DIMENSIONAL THERMOELASTIC ANALYSIS OF FUNCTIONALLY GRADED PLATE

Three-dimensional thermoelastic analysis is presented for an orthotropic functionally graded rectangular plate,which is simply supported and isothermal on its four lateral edges.With the assumption that material properties have arbitrary dependence on the thickness-coordinate,a Peano-Baker series solution is obtained for the thermoelastic fields of the functionally graded plate subjected to mechanical and thermal loads on its upper and lower surfaces by means of state space method.The correctness of the obtained series solution is validated through numerical examples.The influence of different material properties distributions on the structural response of the plate is also studied.     

平板大攻角绕流升力和阻力系数的计算

二维平板或二维对称薄翼型大攻角绕流升力和阻力系数与攻角之间存在的函数关系一般用数据表格的形式给出。本文根据垂直平板绕流阻力实验数据和对称薄翼型全攻角绕流实验数据,分析得到了平板大攻角绕流总压力及其升力分量和阻力分量系数的近似计算公式。结果表明：平板总压力系数约等于攻角正弦值的2倍;总压力的阻力分量系数约等于攻角正弦值平方的2倍;升力分量系数约为攻角2倍的正弦值。计算结果与两组试验数据具有较好的一致性。     

Effect of Hall current on MHD natural convection flow from vertical permeable flat plate with uniform surface heat flux

The effect of the Hall current on the magnetohydrodynamic (MHD) natural convection flow from a vertical permeable flat plate with a uniform heat flux is analyzed in the presence of a transverse magnetic field.It is assumed that the induced magnetic field is negligible compared with the imposed magnetic field.The boundary layer equations are reduced to a suitable form by employing the free variable formulation (FVF) and the stream function formulation (SFF).The parabolic equations obtained from FVF are numer...     

基于油膜干涉法的表面摩擦应力测量技术研究

本文应用油膜干涉法及速度型方法在平板模型上进行低速湍流的表面摩擦阻力测量,探索了油膜法测量表面摩擦阻力的实验技术,分析了不同实验方式对测量结果的影响以及实验误差产生的原因.研究表明,模型安装方式、油膜布置方式以及重力作用的影响在油膜干涉法中基本都可以忽略,在精度要求不高的情况下,不需要对结果进行修正.通过采用热膜法和油...     

Dynamic behaviour of an axially moving plate undergoing small cylindrical deformation submerged in axially flowing ideal fluid

The out-of-plane dynamic response of a moving plate, travelling between two rollers at a constant velocity, is studied, taking into account the mutual interaction between the vibrating plate and the surrounding, axially flowing ideal fluid. Transverse displacement of the plate (assumed cylindrical) is described by an integro-differential equation that includes a local inertia term, Coriolis and centrifugal forces, the aerodynamic reaction of the external medium, the vertical projection of membrane tension, the bending resistance, and external perturbation forces. In the two-dimensional model thus set up, the aerodynamic reaction is found analytically as a functional of the cylindrical displacement, using the techniques of complex analysis. The resulting integro-differential problem is discretized in space with the Fourier-Galerkin method, and integrated in time with the diagonalization method. Examples are computed with physical parameters corresponding to air and some paper materials. The effects of the surrounding fluid on the critical velocity and first natural frequency are investigated, for stationary air, for an air mass moving with the plate, and for some arbitrary axial fluid velocities. The obtained results are applicable for both an ideal membrane and a plate with nonzero bending rigidity.     

复杂厚板的条形传递函数解

建立了规则区域厚板混合状态变量的条形传递函数解,通过定义结点变量,并利用结点位移连续和力平衡条件,将多个简单子区域的解进行组装,从而得到了复杂形状,复杂边界条件厚板的条形传递函数解,由于条形传递函数法的节点位移变量与有限元法的节点位移变量完全一致,可将简单矩形板的条形传递函数解作为一个超东级单元,直拉将超级单元和有限元单元进行综合,可以得到复杂板的条形传递函数解,进一步增强了条形传递函数法对复杂反问题的适应性。     

脱层梁-板的后屈曲分析

研究了含任意位置脱层的梁-板的后屈曲问题.采用小参数摄动法,导出了系统的一阶和二阶控制方程,边界条件,连续条件,平衡条件及相容条件.在算例中给出了梁-板的后屈曲响应曲线,且与有关文献进行了比较.