Polymeric Electron Carriers

Polymers containing 1,4-dihydronicotinamide (P-NAH) alloxan (P-A), and viologen (P-V²⁺) moieties were synthesized and characterized. P-NAH reduced various organic substances such as lipoic acid, alloxan, and viologens and also immobilized quinone mediated by alloxan. P-A was reduced to the polymer-bearing alloxan radical and the dialuric acid structure without crosslinks by one- and two-electron reduction, respectively, and P-A also mediated the redox reaction occurring between aqueous and organic (water-immiscible) layers. P-V²⁺ was converted to the stable viologen radical reversibly by one-electron reduction. Electric potentials and currents on photo-reduction of P-V²⁺ and catalytic behavior of P-V²⁺ in the reduction of carbonyl compounds were examined.     

硬脂酸/异氰酸酯摩尔比对聚丙烯/木粉复合材料性能的影响

用甲苯-2,4-二异氰酸酯（TDI）和硬脂酸（SA）复合改性木粉,在双螺杆挤出机中制备了聚丙烯（PP）基的木塑复合材料（WPC）,研究了SA/TDI摩尔比对木粉表面性能、复合材料力学性能和加工性能的影响。 结果表明,随着SA/TDI摩尔比的增大,改性木粉的表面张力逐渐减小,与PP的界面张力先减小后增大;与未改性的WPC相比,SA/TDI复合改性剂对WPC的拉伸强度、弯曲强度、缺口冲击强度影响不明显,但对无缺口冲击强度提升较大;当SA/TDI摩尔比为1.07时,复合材料的无缺口冲击强度和熔体质量流动速率分别达到9.74 kJ/m2和13.12 g/10 min,分别比未改性WPC提高了77%和22%。     

Electrochemical and XPS studies on corrosion behaviours of AISI 304 and AISI 316 stainless steels under plastic deformation in sulphuric acid solution

The corrosion behaviours of austenitic stainless steels were investigated by electrochemical methods under plastic deformation with constant strain in the naturally aerated 0.5 M H₂SO₄ + 0.2 M KCl solution at room temperature. The work addresses the influence of plastic deformation and molybdenum element on the corrosion resistance of austenitic stainless steels in the test solution. Electrochemical impedance spectroscopy presents the decreasing charge transfer resistance (R_t) and polarization resistance (R_p) values with the immersion time for AISI 304 stainless steel under constant strain deformation, and the increasing R_t and R_p values with the immersion time for AISI 316 stainless steel. The analysis of the chemical composition of the corrosion products was carried out by XPS. Molybdenum addition in AISI 316 stainless steel affects significantly the corrosion resistance because of its high ability to form Mo (VI) and MoCl₅ insoluble compounds in acid medium. Copyright © 2011 John Wiley & Sons, Ltd.     

柔性染料敏化太阳能电池*

本文介绍了染料敏化太阳能电池的工作原理,对其重要研究方向——柔性染料敏化太阳能电池的关键组成部分：光阳极、对电极和电解质等的国内外研究进展进行了评述,分析当前研究过程中存在的问题,并提出提高柔性染料敏化太阳能电池光电转换效率和长期稳定性的对策,对其未来的发展进行了展望.     

Combination of analytical and microbiological techniques to study the antimicrobial activity of a new active food packaging containing cinnamon or oregano against E. coli and S. aureus

The aim of this work is the optimization and application of a group of analytical and microbiological techniques in the study of the activity of essential oils (EOs) incorporated in a new antimicrobial packaging material and the research in depth of the interaction between the microbial cells and the individual compounds present in the active material. For this purpose the antimicrobial activity of the active packaging containing cinnamon or oregano was evaluated against E. coli and S. aureus. The vapour phase activity and the direct contact between the antimicrobial agents themselves, or once incorporated in the packaging material, and the microbial cells have been studied. The direct contact was studied using a broth dilution method. The vapour phase was evaluated by using a new method which involves the use of a filter disk containing the EOs. Furthermore, the kill time assay was used to determine the exposure time for the maximum efficiency in packaging, and transmission electron microscopy was used to investigate the antimicrobial activity and the possible mechanism of action against E. coli and S. aureus. Finally, the compounds absorbed by cells were identified. The results showed that the techniques used provide relevant information about the antibacterial activity of cinnamon and oregano in direct contact as well as in the vapour phase. The antimicrobial packaging showed a fast efficiency which supports its likely application as a food packaging material. Bacteria treated with EOs exhibit a wide range of significant abnormalities; these include formation of blebs, coagulation of cytoplasmatic constituents, collapse of the cell structure and lack of cytoplasmatic material. Some of these observations are correlated to the ability of some of these substances to disrupt envelop structure, especially the inner membrane. After an extraction from dead cells, cinnamaldehyde was detected by GC-MS in E. coli exposed to the active packaging containing cinnamon.     

超高效合相色谱法快速检测塑料食品接触材料中13种紫外吸收剂

建立了一种同时检测塑料食品接触材料中13种紫外吸收剂的超高效合相色谱法。以甲醇为溶剂对塑料食品接触材料样品进行超声提取，经C18固相萃取柱净化，过0.22 μm有机滤膜，采用超高效合相色谱仪分析。选择ACQUTY UPC² HSS C18 SB色谱柱（150 mm×3.0 mm，1.8 μm），以超临界二氧化碳为流动相，异丙醇为改性剂进行梯度洗脱，在最优色谱条件下，13种紫外吸收剂能够在4 min内实现有效分离。结果表明，在各自线性范围内，13种紫外吸收剂的线性关系良好，标准曲线相关系数不低于0.9985，检出限（S/N=3）为0.05~0.15 mg/kg，加标回收率为86.8%~115.7%，相对标准偏差为0.73%~5.61%。该方法快速简便，准确可靠，同时大大减少了有机溶剂的消耗，可用于塑料食品接触材料中13种紫外吸收剂的快速检测。     

A theory of finite tensile deformation of double-network hydrogels

A continuum damage model was developed to describe the finite tensile deformation of tough double-network (DN) hydrogels synthesized by polymerization of a water-soluble monomer inside a highly crosslinked rigid polyelectrolyte network. Damage evolution in DN hydrogels was characterized by performing loading-unloading tensile tests and oscillatory shear rheometry on DN hydrogels synthesized from 3-sulfopropyl acrylate potassium salt (SAPS) and acrylamide (AAm). The model can explain all the mechanical features of finite tensile deformation of DN hydrogels, including idealized Mullins effect and permanent set observed after unloading, qualitatively and quantitatively. The constitutive equation can describe the finite elasto-plastic tensile behavior of DN hydrogels without resorting to a yield function. It was showed that tensile mechanics of DN hydrogels in the model is controlled by two material parameters which are related to the elastic moduli of first and second networks. In effect, the ratio of these two parameters is a dimensionless number that controls the behavior of material. The model can capture the stable branch of material response during neck propagation where engineering stress becomes constant. Consistent with experimental data, by increasing the elastic modulus of the second network the finite tensile behavior of the DN hydrogel changes from necking to strain hardening.     

有机光纤研究进展

综述了近年来有机光纤(塑料光纤) 研究状况, 对有机光纤的分类及适用范围也给予了简单的说明。讨论了影响信号传输的因素和有机光纤光传输损耗的极限, 并对当前受到广泛重视的渐变型有机光纤的研究进展给予了特别的关注。