Characterization of an in‐vacuum PILATUS 1M detector

A dedicated in‐vacuum X‐ray detector based on the hybrid pixel PILATUS 1M detector has been installed at the four‐crystal monochromator beamline of the PTB at the electron storage ring BESSY II in Berlin, Germany. Owing to its windowless operation, the detector can be used in the entire photon energy range of the beamline from 10 keV down to 1.75 keV for small‐angle X‐ray scattering (SAXS) experiments and anomalous SAXS at absorption edges of light elements. The radiometric and geometric properties of the detector such as quantum efficiency, pixel pitch and module alignment have been determined with low uncertainties. The first grazing‐incidence SAXS results demonstrate the superior resolution in momentum transfer achievable at low photon energies.     

Data analysis method to achieve sub‐10 pm spatial resolution using extended X‐ray absorption fine‐structure spectroscopy

Obtaining sub‐10 pm spatial resolution by extended X‐ray absorption fine structure (EXAFS) spectroscopy is required in many important fields of research, such as lattice distortion studies in colossal magnetic resistance materials, high‐temperature superconductivity materials etc. However, based on the existing EXAFS data analysis methods, EXAFS has a spatial resolution limit of π/2Δk which is larger than 0.1 Å. In this paper a new data analysis method which can easily achieve sub‐10 pm resolution is introduced. Theoretically, the resolution limit of the method is three times better than that normally available. The method is examined by numerical simulation and experimental data. As a demonstration, the LaFe_1–xCr_xO₃ system (x = 0, 1/3, 2/3) is studied and the structural information of FeO₆ octahedral distortion as a function of Cr doping is resolved directly from EXAFS, where a resolution better than 0.074 Å is achieved.     

Austenite layer and precipitation in high Co–Ni maraging steel

In high Co–Ni maraging steel, austenite has a great effect on the fracture toughness of the steel and the precipitated carbides are the main strengthening phase. In this study, both austenite layers and precipitation were observed and their formation theory was analyzed by Thermo-Calc simulation and several reported results. TEM and HRTEM observation results showed that the thickness of the austenite layers was about 5–10 nm and the length of the needle-like precipitated carbides was less than 10 nm. The carbides maintained coherent or semi-coherent relation with the matrix.     

全三维电离粒子有源像素探测器优化仿真

提出了一种双外延高能离子注入的单片集成有源像素探测器的传感器结构,以提升传感器对电荷的收集性能和辐射加固,并进行了三维工艺模拟和物理级器件仿真计算.研究结果表明,所提出的传感器结构改善了内部电场和电势的分布,且目标电极的电荷收集效率提高70%,电荷收集时间减少64%.此外,当等效中子辐射流通量在1012—1015cm-2范围内时,所提出的传感器结构比标准传感器结构有更高的电荷收集能力.     

全光固体条纹相机的理论及其静态实验研究

全光固体条纹相机采用空间调制抽运光激发平板波导光偏转器,通过精确控制抽运光和信号光之间的时间延迟,实现对入射到波导芯层信号光的偏转扫描.它能有效解决传统变像管条纹相机因空间电荷效应造成的动态范围降低以及光电阴极材料在红外波段探测受限等问题,且结构简单,系统稳定性高,理论时间分辨率可达皮秒甚至亚皮秒量级.本文围绕全光固体条纹相机的核心部件—–AlxGa1-xAs/GaAs/AlxGa1-xAs平板波导光偏转器,研究了在带填充效应、带隙收缩效应以及自由载流子吸收效应作用下GaAs折射率的变化情况;在GaAs折射率变化达到0.01量级,信号光束斑大小和波导宽度之比p=0.5时,得到系统的理论时间分辨率为2 ps;按照静态实验条件求得的理论空间分辨率为17 lp/mm,实验结果显示其值为9 lp/mm.     

低电压有机薄膜晶体管驱动顶发射有机发光二极管的集成像素的研制

研究了有机薄膜晶体管(OTFT)驱动顶发射有机发光二极管(OLED)的集成制备技术。通过减小栅绝缘层的厚度,达到降低OTFT工作电压的目的。OLED采用标准的绿光器件,利用超薄的Al薄膜作为半透明阴极实现顶发射功能。实现了低电压工作的OTFT与顶发射OLED的集成,其中OTFT的阈值电压为2.0 V,饱和场效应迁移率为0.40 cm2·V-1·s-1。基于实验数据,对集成像素的电特性进行了计算分析,在-5~-10 V的栅电压调控下,像素亮度能在50~250 cd/m2的范围内实现线性灰度调控。     

非晶InGaZnO薄膜晶体管驱动OLED像素电路的仿真研究

为解决非晶InGaZnO薄膜晶体管(a-IGZO TFT)因其阈值电压漂移而导致的OLED电流衰减的问题,本文研究了基于a-IGZO TFT的有源矩阵有机发光显示(AMOLED)像素电路的阈值电压补偿问题。利用实验室制备的a-IGZO TFT器件进行参数提取后建立的SPICE仿真模型并进行仿真计算,对电压驱动型2T1C和4T1C的像素电路进行稳定性的比较研究,证明了4T1C电路对阈值漂移有非常好的补偿效果,并指出增加存储电容值和驱动TFT的宽长比可有效提高OLED电流的保持能力。     

基于不可控微扫描的高分辨力图像重构方法

针对存在不可控微位移的序列低分辨力图像,提出了一种基于2×2不可控微扫描的高分辨力图像重构方法,采用投影法估算出低分辨力图像LR的微位移量,采用基于泰勒级数展开的重构算法由4帧图像重构高分辨力图像.模拟表明：该算法能精确地估计序列图像的帧间位移量并取得较好的重构效果,且算法简单有效可行,处理量小,有利于实现快速处理,在一定程度可满足同步轨道卫星、公安监视等领域对高分辨力成像处理的需求.       

论我国医疗纠纷ADR解决机制的构建

针对我国医疗纠纷的现状及解决机制存在的诸多弊端,结合我国现有制度和体制,提出符合我国国情的ADR解决形式。在我国解决医疗纠纷的过程中,应鼓励和支持和解机制,完善多元化的调解机制及建立相应的医事仲裁制度,并强调了诉讼机制与非诉机制的衔接与互补。     

Enhanced spontaneous emission factor for microcavity lasers

The microcavity and the influence of nonradiative recombination can control spontaneous emission. An analytic resolution of rate equation is studied for microcavity lasers. The relationship between output prop- erties and structural parameters of multi-quantum wells (MQWs) is obtained. One of the most important consequences of the incrcased spontaneous emission factor is the reduction of laser threshold. It is found that the characteristic curve of a "thresholdless" laser is strongly nonradiative depopulation-dependent. The light output is increased by the enhanced well number and the reduced width. In particular, there is an optimal well number corresponding to the lowest threshold current density for MQW structure in the microcavity lasers.