Al2O3陶瓷复合靶抗长杆弹侵彻性能和机理实验研究

用DOP(depthofpenetration)实验研究了质量分数为 90 %的Al2 O3 陶瓷复合靶抗长杆弹侵彻性能。实验表明 :随陶瓷厚度的增加 ,以差分效益系数和靶平均阻力表征的陶瓷复合靶的抗长杆弹侵彻性能降低 ;盖板能增强陶瓷复合靶抗侵彻性能。对回收陶瓷和盖板的破坏特征分析表明 :长杆弹对陶瓷复合靶侵彻过程大致可分为初期侵彻和稳定侵彻两个阶段 ,但对薄靶和厚靶 ,两个阶段在整个侵彻过程中所占比重不同。     

具有非线性热源项的耦合杆系统

主要以经典的算子半群理论为依据,研究了一类具有非线性热效应的耦合杆系统的长时间行为.首先在齐次边界条件和初始条件下,证明了系统解的存在唯一性;其次通过渐近先验估计,证明了系统有界吸收集的存在性;最后利用算子半群的分解技巧,得到了系统全局吸引子的存在性.     

Paradoxical Bending Behavior of Shearable Nonlinearly Elastic Rods

In nonlinear elasticity the exact geometry of deformation is combined with general constitutive relations. This allows a very sophisticated interaction of deformations in different material directions. Based on the Cosserat theory for planar deformations of nonlinearly elastic rods we demonstrate some paradoxical bending effects caused by a nontrivial interaction of extension, flexure, and shear. The analytical results are illustrated by numerical examples.     

Head-flow and npsh performance of an axial piston pump working with organic fluids at different temperatures

A modified version of the standard axial piston pump, normally used with fuels, has been tested with organic fluids R11 and R113. Head-flow characteristics, volumetric and global efficiency, and npsh curves, have been determined at different speeds and fluid temperatures and the results compared with those obtained with kerosene. Pump efficiencies remain satisfactory with high density, very low viscosity and high vapour pressure fluids. In the absence of cavitation, pump performance seems to be a function of kinematic viscosity, while the npsh curves appear to be a complex function of density, viscosity and vapour pressure     

内燃机活塞环－缸套摩擦功耗的设计计算方法之研究

以往在计算内燃机活塞环－缸套摩擦副的摩擦功耗时，只是计算活塞环与缸套之间流体润滑剂的粘性剪应力，这显然不能客观地反映出该摩擦副的润滑状态。实际上，活塞环－缸套间的摩擦力产生于两个方面，一是粘性流体的剪应力，二是摩擦界面相互接触峰元的剪切作用。然而截至目前，针对这两方面进行全面分析研究的报道却还很少，因此，为了给低摩擦功耗环组的设计提供科学依据，基于对活塞环在运动过程中润滑状态的分析，提出了一种适用于不同类型内燃机设计计算的活塞环－缸套摩擦功耗的计算方法，并以其对现有结构的Ｓ１９５柴油机活塞环－缸套摩擦副的摩擦功耗进行了计算，同时还对影响摩擦功耗的因素作了考察与讨论，利用台架试验测量油膜厚度的方法对这种算法进行试验验证的研究结果表明，理论值与实测值吻合得很好。     

等熵轻质活塞风洞中活塞质量对匹配压力振荡的影响

等熵轻质活塞风洞的管道中被压缩的气体是作为实验段的气源，在实验阶段，要求其压力维持恒值，称此压力为匹配压力，这一条件只有在忽略活塞质量的理想情况下才可实现，本文研究在实际情况下，即考虑活塞质量时，质量对匹配压力振荡的影响，从而得出活塞质量的选择范围。     

用升降法求95连杆疲劳极限的探讨

为了较精确地求出95连杆的疲劳极限,本文将在材料疲劳试验中应用较广的升降法推广应用于连杆,给出了用升降法求构件疲劳极限的基本过程。文中首先选取了试验的控制因素并确定了连杆的控制点(应力被选定为控制应力的点定义为控制点)。然后在四级应力水平下进行了连杆的疲劳试验,并以最大应力幅点的应力为计算应力求出了连杆的疲劳极限。     

Spatial Motion of a Rod in a Viscous Fluid Flow

Equations of spatial motion of a curved finitelength rod in a viscous fluid flow are derived. Analytical solutions of problems on the motion of a straight rod under conditions of pure shear, simple shear, and uniaxial extension of the fluid are obtained. Longitudinal stability of the straight rod during its spatial motion is considered. Effective viscosity of a suspension filled by rigid straight rods is evaluated.     

连接阻尼对弹性杆纵向碰撞响应的影响

分析了刚度和阻尼并存的一般边界条件下线弹性杆与刚体的纵向碰撞过程,得到了碰撞后第一个波动周期杆振动的位移、速度和应力的解析表达式,讨论了碰撞持续时间为2倍杆长与波速比的条件.将导出的解析表达式通过具体的算例代入计算,讨论了不同质量比、不同连接刚度条件下连接阻尼对于碰撞过程中杆中质点速度及应力响应的影响.研究表明,连接阻尼改变了受碰撞弹性杆的振动模式,连接阻尼影响着碰撞反射波速度和应力的突变幅度;连接阻尼增大,杆中速度和应力响应分布变平缓:在连接刚度较大的情况下,连接阻尼变化对于杆中质点速度和应力影响较大;碰撞持续时间与质量比、连接刚度、连接阻尼及杆长有关,与碰撞的初速度无关;在质量比较大的情况下,连接阻尼使得反射波到达杆碰撞端时,杆端的应力有显著的变化.     

Automated flow-based anion-exchange method for high-throughput isolation and real-time monitoring of RuBisCO in plant extracts

In this work, a miniaturized, completely enclosed multisyringe-flow system is proposed for high-throughput purification of RuBisCO from Triticum aestivum extracts. The automated method capitalizes on the uptake of the target protein at 4 °C onto Q-Sepharose Fast Flow strong anion-exchanger packed in a cylindrical microcolumn (105 × 4 mm) followed by a stepwise ionic-strength gradient elution (0-0.8 mol/L NaCl) to eliminate concomitant extract components and retrieve highly purified RuBisCO. The manifold is furnished downstream with a flow-through diode-array UV/vis spectrophotometer for real-time monitoring of the column effluent at the protein-specific wavelength of 280 nm to detect the elution of RuBisCO. Quantitation of RuBisCO and total soluble proteins in the eluate fractions were undertaken using polyacrylamide gel electrophoresis (PAGE) and the spectrophotometric Bradford assay, respectively. A comprehensive investigation of the effect of distinct concentration gradients on the isolation of RuBisCO and experimental conditions (namely, type of resin, column dimensions and mobile-phase flow rate) upon column capacity and analyte breakthrough was effected. The assembled set-up was aimed to critically ascertain the efficiency of preliminary batchwise pre-treatments of crude plant extracts (viz., polyethylenglycol (PEG) precipitation, ammonium sulphate precipitation and sucrose gradient centrifugation) in terms of RuBisCO purification and absolute recovery prior to automated anion-exchange column separation. Under the optimum physical and chemical conditions, the flow-through column system is able to admit crude plant extracts and gives rise to RuBisCO purification yields better than 75%, which might be increased up to 96 ± 9% with a prior PEG fractionation followed by sucrose gradient step.