光纤检测系统在燃气管道应力、位移实验分析中的应用

城市燃气管道是城市基础设施的重要组成部分,由于城市路面车流量的增加、道路的路况以及管道本身材质的缺陷,在长期的工作环境下,埋入地下的管道受到了各种力的作用,其受力情况十分复杂。目前管道的埋深和管道本身的设计是根据设计人员的经验或者简单理论分析来确定的,遇到沉降因素复杂的特殊地段管道,其安全就不能保证,所以有必要进行实验分析。本文通过特殊地段管道的模拟试验,分析了在不同沉降因素作用下管道的安全性,试验中应用光纤检测系统及电测系统同时进行检测,两者的分析结果相近,为燃气管道沉降参数监测与预报系统的建立奠定实验基础。     

线性分布荷载作用下梯度功能压电悬臂梁的解

采用逆解法求解了上表面受线性分布荷载作用的压电悬臂梁执行器，其中体积力$F_z$ 呈非线性分布. 首先确定了应力函数和电位移函数的多项式表达式，进而研究了该问题的 通解，以及体积力的不同分布对解答的影响. 常体积力和无体力情况下的解可以由上述 解直接得到. 本文为研究其它类型的压电梯度微观结构提供了一种可行的方法.     

光纤光栅传感器对钢筋混凝土内部应变的测量及温度效应的研究

本文应用光纤光栅传感器实现了对钢筋混凝土试件内部应变的测量．试验不仅就应用光纤光栅进行混凝土结构内部应变测量的技术、工艺进行研究，还通过设计温度控制试验，考察了光纤光栅传感器的温度补偿问题，以及横向应变对测量结果的影响．     

平板湍流边界层整体摩擦阻力的振荡性

本文分别用流场显示和阻力测量两种实验方法,证明了平板整体摩擦阻力存在着振荡性,并得到了其振荡的一些规律和特点。另外,提出了一个与时间相关联的内层速度分布模型。并对其合理性进行了研究,从而导出一个与时间相关联的整体摩擦阻力模型。     

Estimating deflection of a simple beam model using fiber optic bragg-grating sensors

In this paper, we develop a method to estimate the bridge deflection using fiber optic Bragg-grating (FBG) strain sensors. For most structural evaluation of bridge integrity, it is very important to measure the geometric profile, which is a major factor representing the global behavior of civil structures, especially bridges. In the past, because of the lack of appropriate methods to measure the deflection curve of bridges on site, the measurement of deflection has been restricted to just a few discrete points along the bridge, and the measuring points have been limited to the locations installed with displacement transducers. However, by applying classical beam theory, a formula is rearranged to estimate the continuously deflected profile by using strains measured directly from several points. In addition, FBG strain sensors, which are electromagnetic, noise-free and multipoint measurable, are employed to obtain flexural strains more accurately and stably. The regression analysis is performed to obtain a strain function from the measured strain data. Finally, the deflection curve can be estimated by applying the strain function to the formula. An experimental test has also been carried out to verify the developed method.     

准晶体结构光纤表面等离子体共振传感器特性研究

光纤表面等离子体共振传感器在高灵敏度传感和在线实时监测等领域具有重要意义. 设计了一种六重准晶体结构环形通道光纤表面等离子体共振传感器, 基于有限元法对该传感器的传感特性进行了数值模拟. 研究了光纤各结构参量对传感器特性的影响规律. 研究结果表明: 待测液折射率的有效监测范围为1.25–1.331, 最高灵敏度可达26400 nm·RIU^-1, 传感器具有损耗谱杂峰少、探测范围广、灵敏度高、设计灵活性高和光路可弯曲等特点, 在生化检测、公共安全、环境污染监测以及高灵敏度传感等领域具有广泛的应用前景.     

具有Washer型输入线圈的超导量子干涉放大器的制备与表征

超导量子干涉仪(SQUID)放大器具有低输入阻抗、低噪声、低功耗等优点, 目前被广泛用于微弱信号的检测领域. 与其他工艺相比, Nb/Al-AlO_x/Nb结构的约瑟夫森结具有相对较高的转变温度(T_c)、高的磁通电压调制系数以及良好的热循环能力、较宽的临界电流范围, 因此是制备SQUID放大器的很好选择. 设计并制作了欠阻尼、过阻尼约瑟夫森结以及具有Washer型输入线圈的单SQUID放大器, 通过在He³制冷机3 K温区下对器件电流-电压特性进行测量, 得到良好的结I-V特性曲线、SQUID调制特性, 初步实现利用SQUID进行放大作用, 并计算了SQUID的电流分辨率. 此项工作对于超导转变边沿传感器读出电路的实现具有重要的意义.     

基于生命期模型的无线传感器网络信道分配博弈算法

针对无线传感器网络中节点因干扰过大导致重传能耗增加, 进而节点过早失效、网络生命期缩短的问题, 根据网络拓扑信息和路由信息设计节点的负载模型, 从而构建了节点的生命期模型. 然后利用博弈论将路径增益、交叉干扰和节点生命期等性能参数融入到效益函数中, 构建信道分配博弈模型. 理论分析证明该博弈模型存在纳什均衡. 进而运用最佳回应策略, 在所构建的信道分配博弈模型的基础上, 设计了一种优化网络生命期的抗干扰信道分配算法. 该算法使节点在选择信道时避免与网络中交叉干扰较大的节点和生命期较小的节点使用相同信道, 实现干扰小、能耗低且均衡的信道选择. 理论分析与仿真结果证明该算法最终能够快速地收敛到纳什均衡, 且具有较小的信息复杂度, 从而减小算法本身的通信能耗. 同时, 该算法具有良好的抗干扰性和信道均衡性, 能够有效地延长网络生命期.     

Highly selective silver nanoparticles based label free colorimetric sensor for nitrite anions

Highly selective label free colorimetric sensor based on AgNPs stabilized by phenolic chelating ligand, N,N′-bis(2-hydroxybenzyl)-1,2-diaminobenzene (1), for NO₂⁻ anions has been developed. Addition of NO₂⁻ showed selective decolourisation of brownish yellow colour of 1-AgNPs with the detection limit of 10⁻⁷ M. Absorption studies showed the complete disappearance of 1-AgNPs peak at 426 nm due to the conversion of AgNPs to silver ions. The presence silver ions were confirmed by white precipitates of AgCl formation with NaCl. The interference studies confirmed the high selectivity of NO₂⁻ sensing in presence of anions as well as cations by 1-AgNPs. A linear relationship was observed between the change of absorption and concentration of NO₂⁻. The present approach could be performed at room temperature and ambient conditions. The practical applications of 1-AgNPs for selective sensing of NO₂⁻ in different water samples such as ground, river, pond and tap water have also been demonstrated.     

Highly sensitive and selective sensing platform based on π–π interaction between tricyclic aromatic hydrocarbons with thionine–graphene composite

We are just beginning to exploit the fascinating potential of thionine, called electrochemical probe that can selectively recognize specific polycyclic aromatic hydrocarbons (PAHs), as tools for the detection of tricyclic aromatic hydrocarbons phenanthrene (PHE) and anthracene (ANT). A novel electrochemical sensing platform by modification of electroactive thionine functionalized graphene onto glass carbon electrode (Th/GRs/GCE) surface was constructed. The immobilized thionine showed a remarkable stability, which may benefit from the π–π stacking force with graphene. Under optimum conditions, the proposed electrochemical sensor exhibited high sensitivity and low detection limit for detecting PHE and ANT. The total amount of PHE and ANT could be quantified in a wide range of 10 pM–0.1 μM with a good linearity (R² = 0.9979) and a low detection limit of 0.1 pM (S/N = 3). Compounds which possess one or two benzene rings or PAHs with more than three rings, such as benzene, naphthalene (NAP), benzo[a]pyrene (BaP) and pyrene (PYR) show little interference on the detection. Consequently, a simple and sensitive electrochemical method was proposed for the determination of PHE and ANT, which was used to determine PHE and ANT in waste water samples. The electrochemical method provides a general tool that complements the commonly used spectroscopic methods and immune method for the detection of PAHs.