Optical investigation of cavitation erosion by laser-induced bubble collapse

By means of a new force sensor based on optical beam deflection (OBD), the mechanical effects of laser-matter interaction underwater at different incident laser energy are investigated in detail. The experimental results show that a target underwater is impacted in turn by laser-plasma ablation force and high-speed liquid-jet impulse induced by bubbles collapse in the vicinity of a solid boundary. Furthermore, the amplitudes of the two forces increase monotonously with laser energy. According to the ablation force detected by the experiment and the theoretical relationship between laser intensity and ablation pressure, the value of liquid-jet impact against a solid boundary can be easily obtained. In addition, based on the model of a collapsing bubble, some characteristic parameters, such as the liquid-jet impact velocity, the maximum bubble radius, the bubble energy can also be obtained at different laser energy, which are valuable in the corresponding research fields.     

无电极电光电场传感器灵敏度提高的研究

从提高灵敏度角度出发,理论上分析了无电极电光电场传感器电极长度与灵敏度和带宽的关系.通过比较不同结构的传输函数,验证平衡检测方式的可行性,最后选取使用平衡检测的三端口结构作为实验器件结构,从而为器件制作的可行性方案从理论上作了验证.     

开关型霍尔传感器的原理与工程实现

介绍了开关型霍尔传感器的工作原理，设计了适用于工程测量的具体线路，并分析了该线路的特点。     

Efficient and power-awareness query over sensor networks

Sensor networks consisted of low-cost, low-power, multifunctional miniature sensor devices have played an important role in our daily life. Light and humidity monitoring, seismic and animal activity detection, environment and habitat monitoring are the most common applications. However, due to the limited power supply, ordinary query methods and algorithms can not be applied on sensor networks. Queries over sensor networks should be power-aware to guarantee the maximum power savings. The minimal power consumption by avoiding the expensive communication of the redundant sensor nodes is concentrated on. A lot of work have been done to reduce the participated nodes, but none of them have considered the overlapping minimum bounded rectangle (MBR) of sensors which make them impossible to reach the optimization solution. The proposed OMSI-tree and OMR algorithm can efficiently solve this problem by executing a given query only on the sensors involved. Experiments show that there is an obvious improvement compared with TinyDB and other spatial index, adopting the proposed schema and algorithm.     

硅色敏器件对复色光色差辨识能力的数值分析

对复色光的光谱功率分布和色敏器件光谱响应的实验曲线进行了函数拟合，采用Mathematica 4．2计算了具有不同峰值波长和半高宽的高斯分布的复色光在色敏器件中产生的电流比．计算结果表明，待测复色光的峰值波长和半高宽变化对两种典型的色敏器件的输出信号影响的权重比分别为100：1和10：1。权重比说明色敏器件的输出电流比随峰值波长和半高宽的变化非常灵敏，但两者权重不同，其中峰值波长的变化影响更为显著，是影响复色光颜色变化的主要因素．数值分析的结果表明，硅双结色敏器件对复色光色差有良好的辨识能力．两种器件权重比的差异说明了器件制作工艺与其辨识能力的关系，为器件合理设计提供了理论依据．     

A novel capacitive pressure sensor structure with high sensitivity and quasi-linear responseUne nouvelle structure de capteur de pression capacitif avec haute sensibilitée et réponse quasi-linéaire

This paper describes a new capacitive structure of pressure sensor to increase simultaneously the sensitivity and the linearity of the transducer. This structure contains two capacitors which change in response to pressure, but in opposite senses. To increase even more the sensitivity of each capacitor, the pressure sensitive diaphragm carries a central boss. The optimal position and the length of the boss are also calculated. To cite this article: A. Ettouhami et al., C. R. Mecanique 332 (2004).     

Novel optical film sensor design based on p-polarized reflectance

A new scheme of optical film sensor is presented. The sensor is based on p-polarized reflectance, consisting of a sensing coated substrate, is easily optimized for maximum sensitivity in different applications. The resolutions of refractive index n_f, extinction coefficient k_f and thickness h_f of the sensitive films are predicted to be 10⁻⁷, 10⁻⁵ and 10⁻³ nm, respectively. Experimentally, we selected the sol–gel derived SnO₂ films as gas-sensitive films and conducted preliminary gas-sensing test. The results indicate that novel optical film sensor scheme has higher sensitivity, and the detection sensitivity is available to 10⁻¹ ppm on the condition of optimum optical parameters and incident angle.     

磁光玻璃光纤的偏振特性及其在全光纤电流传感器中的应用

在磁光玻璃裸光纤偏振特性研究的基础上，研制磁光玻璃光纤，偏振特性及其在全光纤电流传感器中的应用。将采用模管法拉制成的磁光玻璃光纤置于亥姆霍兹线圈产生的磁场中，当线偏振光通过该光纤时，其偏振面旋转一定角度，把该角度转换成光信号的强度，然后再用仪器进行检测。通过对线偏振光偏振面在磁场中的偏振特性的测试与实验，提出用磁光玻璃光纤构成的全光纤电流传感器，可用于电流和磁场测试。     

数字式温度传感器在冰箱检测系统中的应用

本文介绍了数字式温度传感器的工作原理、性能特征以及如何在冰箱检测系统中引入单总线技术,使用数字式温度传感器更好的实现温度的采集。     

镁掺杂对In2O3电导和气敏性能的影响

用共沉淀法制备了Mg2 + 掺杂的In2 O3 纳米粉 ,研究了镁掺杂对In2 O3 电导和气敏性能的影响 .结果表明 :MgO和In2 O3 间可形成有限固溶体In2 -xMgxO3 (0≤x≤ 0 .40 ) ;MgIn× 电离的空穴对材料导带电子的湮灭 ,使掺镁纳米粉的电导变得很小 ;n(Mg2 + )∶n(In3 + ) =1∶2共沉淀物于 90 0℃下热处理 4h ,用所得的纳米粉制作的传感器在 32 0～ 370℃下 ,对 45 μmol/LC2 H5OH的灵敏度达 10 2 .5 ,为相同浓度干扰气体Petrol的 12倍多 .