Influence of Urbach Energy,Temperature, and Longitudinal Position in the Active Layer on Carrier Diffusion Length in Perovskite Solar Cells

The diffusion length of charge carriers in the active layer of a perovskite solar cell (PSC) of the structure Glass/PEDOT: PSS/CH₃NH₃PbI₃/PC60BM/Al is modelled. It is found that the diffusion length depends on the position x in the active layer measured from the PEDOT: PSS interface, Urbach energy and temperature. By varying the voltage in the range from zero to , it is shown that the dependence of diffusion length on the position x in the active layer reduces at higher voltage. The combined influence of applied voltage and temperature on the diffusion length of charge carriers is investigated and it is found that in the low voltage range the diffusion length is temperature independent, but it becomes significantly temperature dependent at higher voltages. Also, it is found that the diffusion length decreases as the applied voltage increases and this reduction becomes much more significant at higher voltage and temperatures. The combined influence of applied voltage and Urbach energy on diffusion length of charge carriers reveals that the diffusion length decreases when both the applied voltage and Urbach energy increase. However, the reduction in the diffusion length due to the increase in Urbach energy becomes less significant at higher voltage.     

Fabrication of PbTiO3 Ceramic Fibers by Sol-Gel Processing

The sol-gel processing was applied to the fabrication of PbTiO₃ fibers. Pb(CH₃COO)₂·3H₂O and Ti(OC₃H ₇ ⁱ )₄ were refluxed with stirring in 2-methoxyethanol to form Pb-methoxyethoxide and Ti-methoxyethoxide, respectively, followed by mixing with stirring in 2-methoxyethanol to form Pb−Ti double alkoxide. The hydrolysis and polycondensation reaction of this double alkoxide gave polymerized products, and as a result the viscosity of the solution increased, suggesting that linear polymers were produced through the hydrolysis and polycondensation reaction. Homogeneous PbTiO₃ gel fibers were drawn from the spinnable viscous solutions, which were wellcrystallized into perovskite type PbTiO₃ at 650°C. The heat-treated fibers were a few centimeters long and from 10 to 100 μm in diameter. The fiber was made up of extremely uniform grains. Electron diffraction revealed a preferred growth of (101) planes along the fiber axis, which might be due to the linear molecular characteristics of the alkoxide.     

Redox thermochemistry of SrFe1-xCoxO3-d

The enthalpy of oxidation of SrFe_1-xCo_xO_3-d with x=0.33 and 0.67 has been determined by adiabatic calorimetry; average values for x=0.33 and 0.67 are -67±11 and -49.5±9 kJ (mol O₂)^-1. These data and the previously reported value for SrFeO_3-d suggest that the enthalpy of oxidation for pure (perovskite-type) SrCoO_3-d is close to zero. Earlier reported composition - partial pressure data for SrFe_0.67Co_0.33O_3-d are reproduced when preferential oxidation of iron is assumed for low partial pressures of oxygen. This revised version was published online in August 2006 with corrections to the Cover Date.     

纳米晶PbTiO3负载CuO催化NO分解

A large specific surface area perovskite-type mixed oxide PbTiO₃ supported cupric oxide was synthesized as a catalyst for NO decomposition and characterized by techniques such as XPS, XRD, H₂-TPR before and after NO decomposition reactions. The catalytic properties were tested with a fix-bed micro-reactor. The results showed that the PbTiO₃ was inactive for the reactions, but 1wt % Cu/PbTiO₃ catalyst gave fairly good activities for NO decomposition at temperature as low as 473 K. Copper species were found well-dispersed but weakly interacted with the support before NO decomposition, and the NO decomposition caused significant change in the environment of the copper species, which became Cu(Ⅰ) and most probably incorporated into surface crystal lattice of the nano-sized PbTiO₃. In NO reaction, a large amount of oxygen atoms from the decomposition of NO penetrated into the nano-sized PbTiO₃ support and caused small expansion of crystal lattice. The transport of oxygen between the copper species and the catalyst support may be helpful to speed up the kinetic regeneration of active metal sites from oxygen occupancy and resulted in good catalytic performance.     

Influence of the composition of perovskites based on SrMnO<Subscript>3</Subscript> on their catalytic properties in the oxidative coupling of methane

The oxidative coupling of methane (OCM) in a periodic regime over the SrMnO₃ and its derivatives has been investigated. It has been established that partial replacement of the strontium ion by alkali metal ions leads to an increase in both catalytic activity and in selectivity with respect to higher hydrocarbons. Comparison of the results obtained in the present work with those obtained earlier for catalysts based on SrCoO₃ led to the conclusion that the Co-containing catalysts were preferable to the Mn-containing catalysts for carrying out oxidative coupling of methane in a periodic regime.__________Translated from Teoreticheskaya i Éksperimentalnaya Khimiya, Vol. 41, No. 1, pp. 30–34, January–February, 2005.     

Structural, thermal and magnetic characterization of the manganese oxyhalide layered perovskite, (MnCl)LaNb2O7

Mn-Cl sheets were inserted into the perovskite blocks of a double-layered Dion-Jacobson compound by ion exchange at low temperature (390°C). The Rietveld structural analysis of X-ray powder diffraction data (P4/mmm) indicates that the product, (MnCl)LaNb₂O₇, has the manganese coordinated by two apical oxygens from the perovskite layers and four in-plane chlorines within the interlayer space. On heating, this compound exhibits an exothermic transition between 650°C and 750°C that is consistent with metastability. Magnetic characterization shows Curie-Weiss behavior at higher temperatures (>200 K) with a magnetic moment corresponding to the presence of high-spin Mn²⁺ ion (S=5/2). At lower temperatures, antiferromagnetic interactions become significant and the broad maximum at 63 K reveals the 2-D character of the magnetic behavior. The susceptibility data, fit with the high temperature expansion for a Heisenberg square planar system, show a negative exchange interaction of J/k=−3.77 K.     

SOLID STATE CHEMISTRY OF La_(1-x)Li_(x)MnO_3 AND RELATED COMPOUND

A series of perovskite type oxides La_(1-x)A_(x)MnO_3(x=0.1 for A=Li,Na,K;x=0.1～0.5 for A=Li)have been prepared by impregnation.Experimental results showed that the substitution of La~(3 ) by Li~ inLaMnO_(3 ?) greatly increased the selectivity to ethane and ethylene for theoxidative coupling of methane.Temperature-programmed desorption of oxygenproved the presence of oxygen vacancies in the oxide lattice.The higher Mn~(4 )/Mn_t ratio in oxide made the formation of oxygen vacancies easier on the oxidesurface.The general formula of the oxides is La_(1-x)Li_(x)Mn＇V＇_(y)O_(3-y),V=vacancy.     

Anti-solvent assisted treatment for improved morphology and efficiency of lead acetate derived perovskite solar cells

An efficient solution-processable route employing Pb(Ac)₂ as lead source and anti-solvent treatment to achieve fully covered and homogenous perovskite films is reported.     

Low‐Temperature Facile Template Synthesis of Crystalline Inorganic Composite Hollow Spheres

This report presents a facile approach for the low‐temperature synthesis of crystalline inorganic‐oxide composite hollow spheres by employing the bulk controlled synthesis of inorganic‐oxide nanocrystals with polymer spheres as templates. The sulfonated polystyrene gel layer can adsorb the target precursor and induce inorganic nanocrystals to grow on the template in situ. The crystalline phase and morphology of the composite shell is tunable. By simply adjusting the acidity of the titania sol, crystalline titania composite hollow spheres with tunable crystalline phases of anatase, rutile, or a mixture of both were achieved. The approach is general and has been extended to synthesize the representative perovskite oxide (barium and strontium titanate) composite hollow spheres. The traditional thermal treatment for crystallite transformation is not required, thus intact shells can be guaranteed. The combination of oxide properties such as high refractive index, high dielectric constant, and catalytic ability with the cavity of the hollow spheres is promising for applications such as opacifiers, photonic crystals, high‐κ‐gate dielectrics, and photocatalysis.     

Synthesis and properties of the double perovskites La2NiVO6, La2CoVO6, and La2CoTiO6

The double perovskites La₂CoVO₆, La₂CoTiO₆, and La₂NiVO₆, are described. Rietveld fitting of neutron and powder X-ray diffraction data show La₂NiVO₆ and La₂CoVO₆ to have a disordered arrangement of B-cations whereas La₂CoTiO₆ shows ordering of the B-cations (with ∼5% Co/Ti inversion). Curie-Weiss fits to the linear region of the 1/χ plots reveal Weiss temperatures of −107, −34.8, and 16.3 K for La₂CoVO₆, La₂CoTiO₆, and La₂NiVO₆, respectively, and magnetic transitions are observed. La₂CoTiO₆ prepared by our method differs from material prepared by lower-temperature routes. A simple antiferromagnetic spin model is consistent with the data for La₂CoTiO₆. These compounds are semiconductors with bandgaps of 0.41 (La₂CoVO₆), 1.02 (La₂CoTiO₆) and 0.45 eV (La₂NiVO₆).