Mammalian cell growth studiedin situ by fourier transform infrared spectroscopy

Fourier transform infrared techniques were used to monitor mammalian cell growth plated on attenuated total reflection (ATR) crystals. Consistently, the growth kinetics plots generated from the obtained spectra demonstrated a sigmoidal curve representing a sequence of slow, rapid, then tapering cell growth which correlated well with non-spectral cell growth determinations. Significant advantages over traditional methods of measuring cell growth kinetics are demonstrated. The technique has promising potential to be used to study events in areas such as toxicology and cell biology.     

Determination of fluoride in complex liquid matrices by electrothermal atomic absorption spectrometry with in-furnace oxygen-assisted ashing

A new chemical method is reported for the determination of total fluoride in complex liquids and suspensions, such as fruit juices, urine, serum and blood. It is based on the formation of the A1F radical in a graphite furnace afterin situ oxygen-assisted ashing of the untreated sample. The absorbance of this radical is measured at 227.45 nm. The method is relatively easy to use and provides a low detection limit (14 ng/ml) and reasonable reproducibility (5–10%).     

Mercerization of primary wall cellulose and its implication for the conversion of cellulose I→cellulose II

The mercerization of homogenized primary wall cellulose extracted fromsugar beet pulp was investigated by transmission electron microscopy (TEM),X-ray diffraction together with ¹³C CP-MAS NMR, and FT-IR spectroscopy.For samples resulting from acid extraction, mercerization began at 9% NaOH, whereasfor samples purified by alkaline treatment, the mercerization started at 10%NaOH. The change in morphology when going from cellulose I to cellulose II wasspectacular, as all the microfibrillar cellulose morphology disappeared duringthe treatment. This change in morphology was very drastic as soon as the NaOHconcentrations were increased beyond 8 and 9% for the acid and alkalinepreparedsamples, respectively. On the other hand, the conversion was found to be moreprogressive in terms of increasing NaOH concentration when the transformationwas analyzed by X-ray diffraction or spectroscopy. Our observations of themercerization of isolated cellulose microfibrils are consistent with theconceptof cellulose microfibrils made of parallel chains in cellulose I and crystalsofcellulose II consisting of antiparallel chains.     

Tetrachloroferrate(III)-selective liquid membrane electrode based on crystal violet

An extract of crystal violet-tetrachloroferrate(III) in nitrobenzene was used to prepare a tetrachloroferrate(III)-selective liquid membrane electrode with a poly(vinyl chloride) support. The optimal conditions to determine 2.5 × 10^–5 – 5.0 × 10^–2 M iron(III) as tetrachloroferrate(III) (anionic slope 56 mV/decade, detection limit 7.9 × 10^–6 M) were found to be 4.0–5.5.M total chloride in 0.75–1.5M hydrochloric acid. The electrode was reliably applied to determine iron in human blood, haematite and mineralized vitamin syrup by direct potentiometry, standard and sample additions as well as standard subtraction techniques.     

Shot noise sets the limit of quantification in electrochemical measurements

Detection of single molecules, particles, and rapid redox events is a challenge of electrochemical investigations and requires either an amplification strategy or significant averaging for the electrochemical current to exceed the noise level. We consider the minimum number of electrons required to reach the limit of quantification in these electrochemical measurements. A survey of the literature indicates that the state-of-the-art limit in current detection for different types of measurements (e.g. voltammetry, single-molecule redox cycling, ion channel recordings of single molecules, metal nanoparticle collision, and phase nucleation) is independent of the nature of the measurement and increases linearly with reciprocal response time, Δt^?1, over ～5 orders of magnitude (from ～10 to ～10⁶ s^?1). We demonstrate that the practical limit of quantification requires cumulative measurement of ～2100 electrons during Δt and is determined by statistics of counting electrons, that is, the shot noise in the current.     

应用反向传播神经网络预测化合物脑血分配系数

选用27种三维结构性质描述符对脑血分配系数预测建立神经网络模型.网络模型选用典型的适合函数逼近的两层结构神经网络对脑血分配系数(lgBB,BB为脑血浓度比)进行预测,计算中采用的模型具有一个双曲正切型激活函数的隐含层和一个线性激活函数的输出层.计算表明,使用小心选择的反向传播神经网络模型对化合物脑血分配系数具有较好的预测能力.     

Effects of Lead on Temporal Response Properties of Retinal Ganglion Cells in Developing Rats

Neonatal rats have taken in lead, during the period from their parturition to their weaning, from the milk of dams fed with water containing 0.2% lead acetate solutions. The alterations in the temporal response properties of retinal ganglion cells in adult rats (90 days) following the lead exposure at their developing stage have been studied. The results of this investigation demonstrate that the lead exposure in neonatal rats causes decreases in the optimal temporal frequency, bandwidth at half amplitude, temporal resolution and response phase of the retinal ganglion cells in adult rats. Compared with the sustained cells, the transient cells have a much greater alteration in temporal response properties.     

基于核酸探针的光学传感方法和细胞成像研究

许多疾病的特征在于各种生物分子表现出的异常活性,这些物质通常在细胞内外显示过表达现象,因此对其灵敏靶向识别可以提供诊断和治疗效用。由于基因诊疗和化学传感技术的发展,用于灵敏检测细胞内外生物化学物质的核酸探针突显优势。核酸探针可以在稳定进入细胞的同时,特异性地结合目标物质,通过光学方法检测或通过成像技术标识出来。本文综述了采用光学传感方法和成像技术,基于核酸探针检测生物分子的新进展。根据检测对象进行分类,概括分析了几个代表性体系:核酸序列、蛋白质和酶、化学物质和物理化学条件,并详细阐述其关键设计原理、灵敏度及样品检测等结果,同时指出了各类核酸探针的优缺点。     

微流控芯片技术在生命科学研究中的应用

微流控芯片最初起源于分析化学领域,是一种采用精细加工技术,在数平方厘米的基片,制作出微通道网络结构及其它功能单元,以实现集微量样品制备、进样、反应、分离及检测于一体的快速、高效、低耗的微型分析实验装置.随着微电子及微机械制作技术的不断进步,近年来微流控芯片技术发展迅猛,并开始在化学、生命科学及医学器件等领域发挥重要作用.本文首先简单介绍了微流控芯片制作材料和工艺,然后主要阐述了其在蛋白质分离、免疫分析、DNA分析和测序、细胞培养及检测等方面的应用进展.     

Spatially resolved characterization of PEFCs using simultaneously neutron radiography and locally resolved impedance spectroscopy

A method for performing neutron radiography and locally resolved impedance spectroscopy simultaneously in situ in an operating polymer electrolyte fuel cell (PEFC) is presented. The new method provides concurrently spatially resolved information about the local cell performance, the locally limiting processes, and the liquid water distribution. Information about the impact of water on cell performance and limiting processes can be gained in situ on a local scale in an operating PEFC. The method was applied to a PEFC operated on pure H₂/O₂ in co-flow mode under low humidity operating conditions. The results show that in co-flow mode strong flooding and severe drying can occur at the very same time in different sections of a PEFC.