Metamorphic InAs(Sb)/InGaAs/InAlAs nanoheterostructures grown on GaAs for efficient mid-IR emitters

High-efficiency semiconductor lasers and light-emitting diodes operating in the 3–5?μm mid-infrared (mid-IR) spectral range are currently of great demand for a wide variety of applications, in particular, gas sensing, noninvasive medical tests, IR spectroscopy etc. III-V compounds with a lattice constant of about 6.1?Å are traditionally used for this spectral range. The attractive idea to fabricate such emitters on GaAs substrates by using In(Ga,Al)As compounds is restricted by either the minimum operating wavelength of ～8?μm in case of pseudomorphic AlGaAs-based quantum cascade lasers or requires utilization of thick metamorphic In_xAl_1-xAs buffer layers (MBLs) playing a key role in reducing the density of threading dislocations (TDs) in an active region, which otherwise result in a strong decay of the quantum efficiency of such mid-IR emitters. In this review we present the results of careful investigations of employing the convex-graded In_xAl_1-xAs MBLs for fabrication by molecular beam epitaxy on GaAs (001) substrates of In(Ga,Al)As heterostructures with a combined type-II/type-I InSb/InAs/InGaAs quantum well (QW) for efficient mid-IR emitters (3–3.6?μm). The issues of strain relaxation, elastic stress balance, efficiency of radiative and non-radiative recombination at T?=?10–300?K are discussed in relation to molecular beam epitaxy (MBE) growth conditions and designs of the structures. A wide complex of techniques including in-situ reflection high-energy electron diffraction, atomic force microscopy (AFM), scanning and transmission electron microscopies, X-ray diffractometry, reciprocal space mapping, selective area electron diffraction, as well as photoluminescence (PL) and Fourier-transformed infrared spectroscopy was used to study in detail structural and optical properties of the metamorphic QW structures. Optimization of the growth conditions (the substrate temperature, the As₄/III ratio) and elastic strain profiles governed by variation of an inverse step in the In content profile between the MBL and the InAlAs virtual substrate results in decrease in the TD density (down to 3?×?10⁷ cm^?2), increase of the thickness of the low-TD-density near-surface MBL region to 250–300?nm, the extremely low surface roughness with the RMS value of 1.6–2.4?nm, measured by AFM, as well as rather high 3.5?μm-PL intensity at temperatures up to 300?K in such structures. The obtained results indicate that the metamorphic InSb/In(Ga,Al)As QW heterostructures of proper design, grown under the optimum MBE conditions, are very promising for fabricating the efficient mid-IR emitters on a GaAs platform.     

High temperature corrosion behaviour of M(Co,Ni)CrAIY-coatings on high temperature materials-microanalytical investigations

In our former investigations, the phenomenon high temperature corrosion (HTC) was described exemplarily on selected materialcoating combinations for blades of stationary gas turbines, mainly in the temperature region of up to 750° C. To answer the question, in which manner higher gas inlet and/or higher material surface temperature would influence the HTC behaviour, a special analytical technique—the integral layer profile analysis—was introduced to ameliorate concentration profile methods. By examining IN 738 LC specimens with CoCrAlY plasma spray coating, stressed by hot gas at 900° C, the limits of this system are shown by explaining the corrosion mechanism; the method is also used for other systems, e.g. U 520 with NiCrAlY coating at 750° C.     

The Crystal Growth and Characteristics of Etched Figures on c { 0001 } Face of Tabular Beryl Crystal from Pinwu, China

板状绿柱石产于花岗岩云英岩化边部或晶洞壁的白云母-钠长石-绿柱石-水晶的矿物组合中,钠长石呈自形晶,绿柱石的洁净度与透明度相对较差。晶体测量表明,晶体的单形晶面发育依次为c{0001}→s{11 2-1}→p{10 1-1}→m{10 1-0}→v{21 3-1}、n{45 9-4}、a{11 2-0}。微分干涉显微镜（DIC）及扫描电镜（SEM）研究表明：各单形晶面上生长纹（微形貌）反映面网结构的对称性,c{0001}单形晶面上的六边形溶蚀坑（50～170μm）是由平行晶体C轴的各单形晶面生长层从晶体中心向外叠堆组成,层生长机理制约晶体生长全过程,平行双面（c）的生长层较薄（5～8μm）且较稳定,六方双锥（s）生长层较厚且圆滑,六方柱（m）生长层由晶体中心往外其厚度由厚逐渐变薄（12～20μm）,台间隔由窄变宽。晶体溶蚀是从面网密度最大的c{0001}开始,溶蚀面积依平行双面（c）、六方双锥（s）单形晶面由大变小,六方柱（a）、复六方双锥（v、n）单形晶面因面网密度小而未受到溶蚀。据矿物共生组合、流体包裹体均一法测量与拉曼光谱（LRS）分析表明板状绿柱石是在中–高温（303℃）、过饱和度较大、成矿介质的钠长石化发育且热动力环境相对稳定的条件下形成,气液包裹体主要由H2O、CO2及微量CH4、N2组成,CO2及微量CH4、N2可能与碳酸盐围岩有关。     

N-二氯乙酰基噁唑烷合成反应的薄层色谱法研究

用薄层色谱法监测了用二氯乙酰氯、醇胺和酮合成的除草剂的安全剂N 二氯乙酰基 口恶唑烷的反应过程。方法操作简便、快速、准确。     

A PRELIMINARY STUDY ON THE IMPACT OF MESOSCALE IRRIGATION OVER ARID LAND ON MESOSCALE CLIMATE

The present study investigated the modification of mesoscale inhomogeneous distribu-tion of soil wetness, resulting from mesoscale irrigation over arid or semiarid lands in mid-latitude in the later summer or early autumn, on mesoscale climate under conditions withand without synoptic flow influence, using an interactive model between soil and atmo-sphere. The simulations indicated that after a mesoscale irrgation, a wet soil breeze circu-lation was thermally forced, which was, in many features, similar to that of the sea breezecirculation. The influence of synoptic flows on the structure of thermally--induced wet soilbreeze circulation was also discussed.     

Monitoring of depth distribution of trace elements by GDMS

The depth distribution of B and Li have been studied in ZrO₂ layers by GDMS. Zr alloy has been corroded to ZrO₂ in an autoclave in solutions containing Li and B. Samples were collected at different reaction times and analyzed. The GDMS crater depth and the sputter rate could be determined by profilometry for the discharge conditions used. In the analyzed samples three zones could be identified: oxide, interface and zircaloy. The concentration of Li and B was followed in each of the three zones.     

Seed Oil Fatty Acids of Mongolian Compositae: The trans‐Fatty Acids of Heteropappus hispidus,Asterothamnus centrali‐asiaticus and Artemisia palustris

Seed oils from the Compositae plant family are known to contain a variety of unusual fatty acids. Subsequent to the recent discovery of γ‐linolenic acid in Saussurea and Youngia, further Mongolian Compositae species were investigated for their seed oil fatty acid composition. A number of δ3trans‐fatty acids (16 : 1δ3t, 18 : 1δ3t and 18 : 3δ3t, 9c, 12c) were found in the seed oils of Heteropappus hispidus and Asterothamnus centrali‐asiaticus. The latter fatty acid, but not the trans‐monoenes, was also found in one species of Artemisia. These unusual fatty acid isomers were characterized by capillary gas‐liquid chromatographic (GLC) separations in combination with other chromatographic techniques (analytical thin layer chromatography, TLC and preparative argentation TLC), and infrared spectrocsopy (IR). Their identity was further confirmed by co‐chromatography with other seed oils known to contain these trans‐fatty acids. The fact that within the Compositae plant family there are apparently two or three distinct groups of genera containing δ3trans‐fatty acids is discussed.     

Spectroscopic evaluation of painted layer structural changes induced by gamma radiation in experimental models

The degradation of cultural heritage objects by insects and microorganisms is an important issue for conservators, art specialists and humankind in general. Gamma irradiation is an efficient method of polychrome wooden artifacts disinfestation. Color changes and other modifications in the physical chemical properties of materials induced by gamma irradiation are feared by cultural heritage responsible committees and they have to be evaluated objectively and precisely. In this paper FTIR and FT-Raman spectroscopy methods were used to investigate the structural changes in some experimental models of tempera paint layers on wood following 11 kGy gamma irradiation at two dose rates. Radiation chemistry depends on the particular pigment, matrix formed by protein, resin (in case of varnished samples) and water presence. For the majority of painted layer in experimental models very small spectral variations were observed. Small changes in the FTIR spectra were observed for the raw sienna experimental model: for the higher dose rate the egg yolk protein oxidation peaks and the CH stretching bands due to lipids degradation products increased.     

Influence of High-energy electron-beam on photocatalytic activity of TiO2 films on carbon-fiber deposited by atomic layer deposition

High-energy electron-beam with energy of 1 MeV was used for modifying surface structure of TiO₂ thin films on carbon fiber prepared by using atomic layer deposition under atmospheric pressure. TiO₂ nanoparticles (∼20 nm) on carbon fiber underwent structural modification of the surface upon electron-beam treatment, resulting in enhanced photocatalytic activity. In contrast, a thicker film of TiO₂ did not show such changes in surface structure and photocatalytic activity by electron-beam treatment. We demonstrate that electron-beam can be used for modifying surface structure of photocatalysts consisting of nanoparticles for improvement of their activity.