Reagent concentration effects in the REM resin solid phase synthesis of tertiary amines

The use of reagent concentration has resulted in increased rates for all stages of the REM resin synthesis of tertiary amines. These increases in rate translate into faster reaction times, higher yields and lower reagent consumption. Of the methods examined, the most successful was the use of perfluorous solvents, either alone or with a small amount of organic co-solvent.     

Studies on the blends of cardanol-based epoxidized novolac resin and CTPB

Cardanol-based novolac-type phenolic resins were synthesized with different mole ratios of cardanol-to-formaldehyde, viz., 1:0.6, 1:0.7, and 1:0.8. These novolac resins were epoxidized with molar excess of epichlorohydrin at 120 °C in basic medium. The epoxidized novolac resins were, separately, blended with different weight ratios of carboxyl-terminated polybutadiene liquid rubber ranging between 0-25 wt% with an interval of 5 wt%. All the blends were cured at 150 °C with 40 wt% polyamide. The formation of various products during the curing of blend samples has been studied by Fourier-transform infra-red spectroscopic analysis. The tensile strength and elongation-at-break of the cured samples increased up to 15 wt% in the blend and decreased thereafter. This blend sample was also found to be most thermally stable system. The blend morphology, studied by scanning electron microscopy analysis, was finally correlated with the structural and property changes in the blends.     

Hydrogenation of Polymer

1 Introduction Hydrogenated polymer resins arei mprovedsolubility with other polymer ,transparency andstability,usinghot melt adhesive ,insulation oil ,optical materials .The hydrogenationis different to monomer because of shapeobstacle ,spread of molecular ,solid or high viscosity at roomtemperature .And separation of catalyst is not soeasy after the reaction.DCPDresinis hydrogenated with Ni-Kieselgur in cyclohexane .     

中性磷萃淋树脂吸附铼的性能和机理研究ⅢCL－P＿（350）－KReO＿4－HNO＿3体系

本文报道四甲基膦酸二甲庚酸萃淋树脂（ＣＬ－Ｐ＿（３５０）从硝酸溶液中吸附鳞的性能和机理研究。实验结果表明，吸附平衡服从Ｌａｎｇｍｕｉｒ经验等温式。测得吸附物分子中Ｐ（３５０）与Ｒｅ（Ⅶ）的摩尔比为２：１。Ｒｅ（Ⅶ）是以形式被树脂吸附，其吸附机理属于综合反应：并测定了吸附过程的热力学函数。     

氨基膦酸羧酸螯合树脂的合成及其对痕量镧系稀土富集分离性能的研究

简要叙述了氨基膦酸羧酸树脂的合成路线 ,用 ICP- AES对其富集分离痕量镧系稀土元素进行了研究 ,讨论了吸附酸度、洗脱、吸附流速以及共存离子干扰等的影响 ,并进行了实际样品的分析 ,获得了满意的结果 .     

大孔树脂提取中药有效成分的放大研究

用两种不同的方法对大孔树脂吸附柱进行了工艺放大,确定了大柱的上柱流量,计算出其吸附量、吸附效率等参数.结果表明,采用保持柱内通过时间不变(v/L=常数)的方法进行放大,其计算值与实验值吻合较好,树脂的吸附效率在90%左右,处理能力能够满足生产需要,可以作为大孔树脂吸附柱工艺放大的依据.当上柱流量在40～170L·h-1范围内变动时,其吸附效率在71 15%～91 56%的范围之内变化.     

纤维素基磁性聚偕胺肟树脂吸附锂

研究了氯化锂浓度、树脂含量和溶液的ＰＨ对碱式纤维素基磁性聚偕胺肟树脂吸附Ｌｉ＾＋离子能力的影响。在适当条件下，每个偕胺肟基可吸附两个Ｌｉ＾＋离子。     

工业氟化氢钠中NaHF_2含量的测定

对工业氟化氢钠产品中NaHF_2含量的测定方法进行了探讨,确定用直接滴定法进行测定,并已应用于工业生产控制。     

双甲基丙烯酰氧苯基丙烷与苯乙烯共聚物的光学性能

标题共聚物的耐冲击性与丙烯酸酯均聚物相比有明显改善,但随着双烯单体含量的降低,共聚物的耐热性和表面硬度有所下降。丙烯酸酯含量为70%的共聚物的吸收紫外光能力最强(<370nm全吸收),含量为5%～10%的共聚物耐吸水性、耐酸耐碱性及耐冲击性最好。     

GC/MS分析新疆大麻烟中的大麻类物质

大麻类物质是大麻制品及大麻植物的主要成分。本文采用GC／MS技术分析了新疆大麻烟中的大麻类物质。在莎车的麻烟中检测到16种大麻类组分，如CBD-C3、CBT、Δ^9THCV、CBL、CBD-C4、CBC、CBV、CBD、CBCR、Δ^10sTHC、CBE、Δ^3THC、Δ^9THC、DCBF、CBG和CBN。按照GC／MS鉴定的通用法则，推定了它们的结构。