我的几点意见——评论“关于狭义相对论的本质”一文

评论了“关于狭义相对论的本质”一文,实际上仍使用了狭义相对论的两个基本假设。     

STUDY ON THE DUCTILE DEFORMATION DOMAIN OF THE SIMPLE SHEAR IN ROCKS——TAKING BRITTLE FAULTS OF THE COVERING STRATA IN THE SOUTHERN JIANGSU AREA AS AN EXAMPLE

A study on the ductile deformation domain of the brittle fault in the shallow level ofthe crust is a new probe field for the modern structural geology. Taking the southern Jiang-su Province area as an example the orientation measurement of quartz crystals, the com-positional texture observation of three pressure sensitive minerals and the rheological param-eter determination of dislocation densities, etc. have been demonstrated and analysed basedon typical samples in the present paper. In addition, their generation mechanisms arealso discussed from the cataclastic rheology, the dynamic differentiation and the simpleshearing, specially, from the Ode strength theory. Finally, a generative relationship betweenthe ductile deformation domain of the brittle fault system, in the regional layer--slip andthe formation of the stratabound ore deposit is shown as well.     

Photoinduced electron transfer at liquid|liquid interfaces. Part VII. Correlation between self-organisation and structure of water-soluble photoactive species

The self-organisation of a variety of dyes at the water|1,2-dichloroethane interface was studied by admittance measurements, photocurrent–potential curves and light polarisation anisotropy of the photocurrent. The heterogeneous photo-oxidation of ferrocene was studied at interfaces sensitised by Sn(IV) meso-tetra-(4-carboxyphenyl) porphyrin dichloride (SnTPPC), chlorin e-6, protoporphyrin IX (protoIX) and Fe(III) protoporphyrin IX chloride (Fe-protoIX). Cyclic voltammograms and capacitance voltage curves exhibit different features associated with the self-assembly of the dye species at the liquid|liquid boundary. In the case of SnTPPC, the capacitance curves displayed the characteristic responses commonly associated with the specific adsorption of ionic species. On the other hand, chlorin e-6, protoIX and Fe-protoIX show rather complex behaviour suggesting not only changes in the excess charge but also in the dielectric permittivity of the interface. Differences in the photocurrent efficiency were also observed under the same experimental conditions. The relative magnitude of the photocurrent responses were rationalised in terms of the phenomenological electron transfer rate constant, the photon capture cross-sections and the lifetime of the triplet state as obtained from nanosecond flash photolysis. Finally, the average molecular orientation of the adsorbed photoactive species was estimated from the photocurrent dependence on the angle of light polarisation in total internal reflection. The results show a clear correlation between the orientation of the transition dipole and the distribution of the peripheral carboxyl groups responsible for the hydrophilic nature of the dyes.     

Cadmium colloids from non-aqueous solvents

Cadmium colloids have been prepared by Chemical Liquid Deposition (CLD). The metal is evaporated to yield atoms which are solvated at liquid nitrogen temperature, and upon warming, stable liquid colloids are formed with particle size ranging between 25–100 Å. Zeta potentials were calculated according to the conversion of Hunter and the Hückel equation, for ethanol and dimethyl sulphoxide. UV/VIS measurement of most of the black colloids showed absorption band around 280 nm. For comparison, we prepared CdS colloid with size 400–625 Å. The colloids are stable to oxidation in air and/or oxygen bubbling. The synthesis of colloids and films from Cd with acetone, 2-butanone, ethanol, 2-propanol, 2-methoxyethanol, DMF and DMSO is reported. Transmission Electron Microscopy (TEM) allows us to determine particle size.     

Magnetic field effects on the crystal orientation and surface morphology of electrodeposited iron films

The effects of a magnetic field (5 T) on crystal orientation and surface morphology were investigated for iron films electrodeposited in ferrous aqueous solution. XRD measurements for the iron films showed that the preferred orientation parallel to the substrate was determined by the current density and not influenced by the magnetic field. By X-ray pole figure measurements, however, the crystal texture of the iron films electrodeposited at 10 mA cm^–2 and 30 mA cm^–2 was found to be controlled by the magnetic field. That is, the (110) planes were orientated in same direction of the magnetic field vector at angles of 30° and 35° to the direction normal to the substrate plane at 10 mA cm^–2 and 30 mA cm^–2, respectively. When the morphology was observed by SEM, iron grains at 30 mA cm^–2 changed from a triangular pyramid shape at 0 T to a complex star-like shape at 5 T.Presented at the 3rd International Symposium on Electrochemical Processing of Tailored Materials held at the 53rd Annual Meeting of the International Society of Electrochemistry, 15–20 September 2002, Düsseldorf, Germany     

Operation of the quasi-optical gyrotron at harmonics of the gyrofrequency

This paper investigates the performance of a quasioptical gyrotron, when the electron beam interacts with the radiation fields at harmonics of the gyrofrequency. The nonlinear equations of motion are obtained in the slow-timescale. The expression for the linear gain is derived and the conditions for excitation are given (frequency threshold, optimal operating point, bean current and resonator quality thresholds). In the nonlinear regime, it is shown that maximum efficiencies comparable to those at the fundemental (50%) are possible, albeit at a prohitively high radiation field amplitude, while realistically feasible field amplitudes can give somewhat smaller, but nevertheless still high efficiencies (15%). Finally, the results are suplemented by empirical scaling laws, useful for experimental designs.     

ToF‐SIMS observation of PTFE surfaces modified by α‐particle irradiation

The surface structure of polytetrafluoroethylene (PTFE) upon α‐particle irradiation has been investigated at doses in the range of 1 × 10⁷ to 1 × 10¹¹ Rad and compared with the surface structure of the unirradiated polymer. Both neat and 25% fiberglass content PTFE were studied. The samples, maintained at nominal room temperature, were irradiated in vacuum by 5.5 MeV ⁴He²⁺ ions generated in a tandem accelerator beam line. Static time‐of‐flight SIMS (ToF‐SIMS) was employed to probe chemical changes at the surface as a function of the irradiation level. In general, the data are indicative of increased cross‐linking at α‐doses less than 1 × 10⁹ Rad, followed by increased fragmentation and unsaturation at α‐doses greater than 1 × 10⁹ Rad. Throughout the irradiation regime, scission is a constant factor promoting cross‐linking, branching, and unsaturation. However, at α‐doses greater than 1 × 10¹⁰ Rad, extreme structural degradation of the polymer becomes evident and is accompanied by conversion to oxygen‐functionalized and aliphatic compounds. Thus, for PTFE in an α‐particle field, an upper exposure limit of ～10¹⁰ Rad is essential for nominal retention of molecular structure. Finally, a quantitative relationship between α‐dose and characteristic fragment ion intensity is developed. Copyright © 2005 John Wiley & Sons, Ltd.     

片状化石燃料的循环流化床燃烧(Ⅰ)--片状颗粒的形貌描述和流态化阻力特征描述

比较了不同球形度概念对片状化石燃料的描述效果,研究了片状化石燃料球形度变化对其流态化特征的影响.分析了Krumbein球形度为0.1～0.4的京西无烟煤在一台50MW循环流化床锅炉上表现出来的特殊现象,如运行床温和炉膛压力大幅度波动、依靠排放冷渣保持稳定运行,揭示了这些现象发生的原因.     

WO3粉在高速层间剪切条件下的颗粒破碎特征

研究了WO3粉和W粉的剪切破碎时间对WO3粉和W粉的沉降曲线、平均粒度、BET比表面及松装密度的影响.用TEM和SEM对剪切破碎前后的粉末进行了直接观察.结果表明:新型剪切破碎机能有效地粉碎微米级WO3等脆性粉末,同时可以破坏超细W粉中的桥接团粒,使W粉和WO3粉的松装密度增加1倍以上,但对比表面积影响不大.     

前向多翼离心风机叶片尾迹和蜗壳二次流动的试验研究

对前向多翼式离心风机建立了性能及流场测试台位 性能试验及流场测试表明,性能试验重复性良好,曲线符合理论性能曲线.用粒子图像速度场仪技术对叶片尾迹区及蜗壳出口横截面上的二次流做了详细的变工况测量与分析.结果表明:叶片尾迹区脉动强度达20%～70%;在设计工况附近叶片尾迹影响区域小,在非设计工况下叶片尾迹影响区域大,尾迹区域占到蜗壳径向宽度的15%～25%,约是叶片弦高的2～3倍;在蜗壳横截面上明显存在二次流旋涡;沿着蜗壳旋出方向二次流对称分布,但是到达出口时,小流量下两侧旋涡结合成一个旋涡,大流量下两侧旋涡一直保持到蜗壳出口.