单光子探测器量子效率的绝对自身标定方法

提出一种单光子探测器量子效率的绝对自身标定方案，利用光参量下转换过程中产生的光子对在时间上的相关性，先将参量光束分为两路，然后引入相对延时，使同时产生的孪生光子先后进入单光子探测器，然后将探测器之后的电路分为三路，其中一路直接进入计数器得到探测器所探测到的光子的总计数率，另两路用电路方法引入和光路相当的相对延时，经符合电路后进入计数器，得到前后到达探测器的光子对之间的符合计数率.这样，从符合计数率与总光子计数率之比即可在不需要任何其他探测器或者参照标准的情况下获得探测器的量子效率.文中给出两种方案，分别适     

如何合理开展多媒体网络教室的课堂教学设计

多媒体网络教室既是辅助教师教学的工具，也是学生个别化学习的工具，若合理使用，可以改革传统的课堂教学，丰富课堂教学活动，提高学生的学习兴趣，增强课堂教学效果，但是目前一些教师在使用其教学时没有真正发挥出它的功能，笔者主要结合多媒体网络教室的功能，从教学设计的角度谈一谈如何合理设计多媒体网络教室的课堂教学。     

核磁共振成像用磁体的计算机辅助设计

核磁共振成像用的磁体要求在一定的磁场强度下保持大范围的均匀度。本文给出球形空芯磁体和环形空芯磁体的计算机辅助设计方法。     

酒店计算机管理系统

酒店宾馆总台有大量业务数据,传统手工处理效率低,不能适应现代化管理的需要.现代计算机处理数据速度快、效率高、成本低,本系统实现酒店宾馆总台的大量业务数据从手工处理转为计算机自动处理,并交付实际应用.     

Internal standardization for the determination of cadmium,cobalt, chromium and manganese in saline produced water from petroleum industry by inductively coupled plasma optical emission spectrometry after cloud point extraction

In the present paper a procedure is proposed for the determination of traces of Cd, Co, Mn and Cr in petroleum industry produced water by inductively coupled plasma optical emission spectrometry. The procedure is based on cloud point extraction of these metals, as their dithizonate complexes, into the surfactant-rich phase of octylphenoxypolyethoxyethanol surfactant (Triton X-114). Extractions were carried out in solutions with salinities between 10‰ and 70‰. Since residual salinity in the surfactant-rich phase caused differences in its transport to the plasma, yttrium was used as an internal standard to correct for this effect. The simultaneous metal extraction procedure was optimized by response surface methodology using a Doehlert design and desirability function. Enhancement factors of 21, 21, 9 and 19, along with limits of quantification of 0.093, 0.20, 0.73 and 1.2 μg L^− 1, and precision expressed as relative standard deviation (n = 8, 20.0 μg L^− 1) of 5.8, 1.2, 1.7 and 5.7% were obtained for Cd, Co, Mn and Cr, respectively. The accuracy was evaluated by spike recovery tests on the high salinity water samples with salinity of 40 and 63‰.     

圆形池壁滑模提升系统设计与施工

本阐述了郑州污水处理厂等直径钢筋混凝土消化池，采用滑升模板施工，连续浇筑混凝土提高工效，经过满水和闭气试验，符合设计要求，保证工程质量．取得较好的结果。     

光参量啁啾脉冲放大增益特性研究

 通过对非线性三波耦合方程组进行数值求解，研究了光参量放大的增益特性及饱和放大特性。给出了泵浦光、信号光参数对参量增益的影响及其与晶体饱和长度的关系。且OPA具有传统CPA系统所不具有的优点，将有可能取代传统的CPA系统而作为超短超强激光系统的新型前端。     

Solving a class of multiplicative programming problems via c-programming

In this note we show that many classes of global optimization problems can be treated most satisfactorily by classical optimization theory and conventional algorithms. We focus on the class of problems involving the minimization of the product of several convex functions on a convex set which was studied recently by Kunoet al. [3]. It is shown that these problems are typical composite concave programming problems and thus can be handled elegantly by c-programming [4]–[8] and its techniques.     

干电池供电式电子标准电池的设计

标准电池是度量电源电动势的标准仪器．利用RC4191和MC1403精密的低压稳压特性，设计一款电子稳压式的标准电池，既可克服传统汞镉标准电池的缺点，又能保证相同精度的实验性能要求．     

Pseudoaffinity, de Boor algorithm, and blossoms

In order to ensure existence of a de Boor algorithm (hence of a B-spline basis) in a given spline space with (n+1)-dimensional sections, it is important to be able to generate each spline by restriction to the diagonal of a symmetric function of n variables supposed to be pseudoaffine w.r. to each variable. We proved that a way to obtain these three properties (symmetry, n-pseudoaffinity, diagonal property) is to suppose the existence of blossoms on the set of admissible n-tuples, given that blossoms are defined in a geometric way by means of intersections of osculating flats. In the present paper, we examine the converse: do symmetry, n-pseudoaffinity, and diagonal property imply existence of blossoms?