美国室内设计师资质考试及其对我国的启示

介绍了美国国家室内设计师资格委员会（NCIDQ）关于专业室内设计师的概念，以及NCIDQ室内设计师资质考试的方式及类型，并从室内设计观、室内设计教育等方面分析了这一考试对我国的启示作用，指出室内设计师资质考试制度是公众利益的重要保障，是规范室内设计行业的必要措施．     

束晕-混沌的复杂性理论与控制方法及其应用前景

本文系统论述涉及强流加速器等强流离子束装置中产生的束晕-混沌的复杂性理论与控制方法及其应用前景。强流离子束在核材料生产与增殖、洁净核能、放射性废物嬗变、放射性药物生产、重离子聚变、高能物理、核科学与工程、国防与民用工业和医疗等许多方面都有极其重要的应用潜力和诱人的发展前景。尤其是，近年来强流加速器驱动的放射性洁净核能系统是国内外关注的热门课题，因为它比常规核电更安全、更干净、更便宜。但是，强流离子束形成的束晕-混沌的复杂性现象已引起了国内外广泛关注，需要加以抑制、控制和消除这类现象，解决这一难题已经成为强流离子束应用中的关键问题之一。目前不仅必须深入研究这类束晕-混沌的复杂特性及其产生的物理机制，而且需要研究如何实现对束晕-混沌的有效控制，并寻求和发展其新理论、新方法和新技术。这就向强流离子束物理和非线性-复杂性科学及其技术提出了一系列极富挑战性的新课题。本文结合国内外的研究概况，根据我们多年来的研究成果，特别是我们首创性地提出了一些束晕-混沌的有效控制方法，它们包括：非线性反馈控制法，小波反馈控制法，变结构控制法，延迟反馈控制法，参数自适应控制法等，进行重点的介绍。对上述课题当前的主要进展及相关问题进行系统的总结和比较全面综述的评论。最后，指出该领域今后的研究方向，以推动这个崭新领域的深入研究和应用发展。     

Order restricted randomized designs for control versus treatment comparison

We develop a method of randomizing units to treatments that relies on subjective judgement or on possible coarse modeling to produce restrictions on the randomization. The procedure thus fits within the general framework of ranked set sampling. However, instead of selecting a single unit from each set for full measurement, all units within a set are used. The units within a set are assigned to different treatments. Such an assignment translates the positive dependence among units within a set into a reduction in variation of contrasting features of the treatments. A test for treatment versus control comparison, with controlled familywise error rate, is developed along with the associated confidence intervals. The new procedure is shown to be superior to corresponding procedures based on completely randomized or ranked set sample designs. The superiority appears both in asymptotic relative efficiency and in power for finite sample sizes. Importantly, this test does not rely on perfect rankings; rather, the information in the data on the quality of rankings is exploited to maintain the level of the test when rankings are imperfect. The asymptotic relative efficiency of the test is not affected by estimation of the quality of rankings, and the finite sample performance is only mildly affected.     

PVC基活性炭的制备及其吸附性能的研究Ⅰ——PVC沥青的制备及其预氧化

以PVC树脂为原料,采用两个恒温段的程序升温方法加热脱氯制备PVC沥青,并通过空气预氧化法,对所制备的PVC沥青进行了预氧化处理.实验结果表明,PVC树脂在流速为100 mL/min氮气气氛中,以10℃/min速率程序升温至270℃,恒温脱氯150 min后再程序升温至410℃并恒温芳化120 min,可以制备出脱氯率和得率均较高的PVC沥青.该PVC沥青在300℃温度下,采用空气预氧化法预氧化120min,可获得增重率约为11%,氧化交联度较高、耐热性能较好的预氧化PVC沥青.FT-IR光谱分析结果表明,PVC沥青在预氧化的过程中,主要发生了氧化脱氢、脱水、CO2缩聚交联反应,使沥青形成耐热型的氧桥结构,从而达到预氧化目的.     

Mid-infrared generation based on a periodically poled LiNbO3 optical parametric oscillator

We report a nanosecond Nd:YVO_4-pumped optical parametric oscillator (OPO) based on periodically poled LiNbO_3 (PPLN). Tuning is achieved in this experiment by varying the temperature and period of the PPLN. The design of double-pass singly resonant oscillator (DSRO) and confocal cavity enables the OPO threshold to be lowered considerably, resulting in a simple, compact, all-solid-state configuration with the mid-infrared idler powers of up to 466mW at 3.41μm.     

不同维生素组合对南美白对虾生长性能的影响

选取我国海水养殖种类中的南美白对虾为研究对象,采用均匀设计法,在相同基础日粮中,分别添加不同配比的维生素组合,其中有VE（X1）、烟酸（X2）、肌醇（X3）、泛酸钙（X4）、VB6（X5）,经过45 d的试验,以相对体重和相对体长为指标,建立了多元二次多项式回归模型,并利用SAS软件在计算机上拟合,用求极值的方法给出南美白对虾不同维生素组合的最佳配方.     

数码相机CMOS图像传感器的特性参数与选择

介绍了数码相机的核心器件———CMOS图像传感器的特性参数和在数码相机设计过程中CMOS图像传感器的选择。选择CMOS图像传感器,不仅需要考虑包括传感器的尺寸、像素总数和有效像素数、最小照度、动态范围、灵敏度、分辨力、光电响应不均匀性以及光谱响应等在内的特性参数,而且还要考虑电源管理和功耗、模数转换位数、开发的简便性以及成本等因素。     

Robust handling of non‐linear constraints for GA optimization of aerodynamic shapes

A new approach to the robust handling of non‐linear constraints for GAs (genetic algorithms) optimization is proposed. A specific feature of the approach consists of the change in the conventional search strategy by employing search paths which pass through both feasible and infeasible points (contrary to the traditional approach where only feasible points may be included in a path). The method (driven by full Navier–Stokes computations) was applied to the problem of multiobjective optimization of aerodynamic shapes subject to various geometrical and aerodynamic constraints. The results demonstrated that the method retains high robustness of conventional GAs while keeping CFD computational volume to an acceptable level, which allowed the algorithm to be used in a demanding engineering environment. Copyright © 2004 John Wiley & Sons, Ltd.     

Geometrical Molecular Structure Design Concept in Approach to Homo- and Heterometallic Precursors of Advanced Materials in Sol–Gel Technology

The article describes the principles of the Single Source Precursor approach to inorganic materials and introduces the Geometrical Molecular Structure Design Concept (MSDC) based on the choice of a proper molecular structure type for the desired precursor and completing it with ligands providing both the necessary number of donor atoms and the sterical protection of the chosen core. Application of MSDC is illustrated with examples taken from development of new approaches in the synthesis of oxide and sulfide catalysts and ferroelectric oxide materials.     

光参量啁啾脉冲饱和放大的增益稳定性

 光参量啁啾脉冲放大（OPCPA）在饱和放大区存在一个增益稳定点，据此设计了一个输出稳定的三级OPCPA系统；第一、二、三级分别选用准相位匹配的周期极化钛氧磷酸钾（PPKTP）晶体、LBO晶体和KDP晶体作为增益介质。饱和放大时，增益随泵浦光强度变化时的增益输出稳定性明显改善，在泵浦光强度抖动低于6%的情况下，各级光参量放大器OPA输出的增益抖动小于1%。前级采用准相位匹配的PPKTP晶体作为增益介质，在远低于破坏阈值的30MW/cm²的泵浦功率密度下，可得到2×10⁵的饱和放大增益和20%的能量转换效率。