Thermal decomposition of rare earth element enanthates

The conditions of formation of Y, La and lanthanide (from Ce(III) to Lu) enanthates were worked out, their composition and their solubilities in water at 291 K were determined, and the conditions of their thermal decomposition were studied. They were prepared as crystalline solids with general formula Ln(C₇H₁₃O₂)₃·nH₂O, wheren=2–10. On heating, they decompose in two or three steps. They first lose some water molecules and then decompose to the oxides directly (salts of Y and heavy lanthanides) or via the intermediate formation of Ln₂O₂CO₃ (salts of La, Pr, Nd, Sm and Eu). Only yttrium enanthate dihydrate loses 2 water molecules on heating to form an anhydrous complex, which decomposes directly to Y₂O₃. The temperatures of dehydration are similar for all complexes (323–343 K), while the temperatures of oxide formation vary irregularly from 823 K for CeO₂ to 1078 K for La₂O₃.     

Crown-containing styryl dyes

Styryl dyes containing a crown ether group and a heteroaromatic moiety with a sulfoalkylN-substituent (1a,b) undergo photocyclodimerization in acetonitrile in the presence of Mg(ClO₄)₂ to give only the typeA isomer of cyclobutane derivative (2a,b). The photochemical regio- and stereoselectivity of the cycloaddition is explained by self-organization of thetrans-isomers of the styryl dyes upon complexation with the Mg²⁺ cations into dimers with a fixed mutual arrangement of multiple bonds.For part 7, see ref. 1.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1449–1452, August, 1993.     

Investigation of homo- and heterodimer alkali metal cation complexes of resorc[4]arenes by electrospray ionization mass spectrometry

Resorc[4]arenes are compounds with interesting properties, mainly because of their ability to form host-guest complexes with the guest located inside the cavity. The size of the guest limits the complexation, as shown by a competition experiment with tetraalkylammonium ions of different size. By electroscopy ionization tandem mass spectrometric experiments on resorc[4]arene heterodimers bearing an alkali metal ion as guest, it was found that there must be two different binding mechanisms for alkali metal ions with high surface charge density (Li(+) and Na(+)) on the one hand compared with those with a lower surface charge density on the other hand (K(+), Rb(+), Cs(+)).     

Theoretical study of reaction channels for the weakly bound complex systems created with HF,CO2, and various amines

This investigation conducted reaction channels of weakly bound complexes CO₂…HF, CO₂…HF…NH₃, CO₂…HF…NH₂CH₃, CO₂…HF…NH(CH₃)₂, and CO₂…HF…N(CH₃)₃ systems, using the Gaussian 98 package at the B3LYP/6‐311++G(3df,2pd) level. The syn‐fluoroformic acid or syn‐fluoroformic acid plus NH₃ or amine conformers are more stable than the related anti‐fluoroformic acid or anti‐fluoroformic acid plus NH₃ or amine conformers. However, the above‐mentioned weakly bound complexes are more stable than both the related syn‐ and anti‐type fluoroformic acid or acid plus NH₃ or amine conformers and their related decomposed into CO₂ + HF or CO₂ + NHR₃F (R?H, CH₃) combined molecular systems. Five reaction channels of the weakly bound complexes exist. Each channel includes weakly bound complexes and their related above‐mentioned systems. Moreover, each reaction channel contains two transition states. The transition state between the weakly bound complex and anti‐fluoroformic acid type structure (T₁₃) is significantly higher than that of internal rotation (T₂₃) between syn‐ and anti‐FCO₂H (or FCO₂H…NR₃) structures. However, the above‐mentioned T₁₃ can significantly decrease its energy by adding the third molecule NH₃ or NR₃ (R?H or CH₃). The more CH₃ that is substituted in NR₃ of the reaction channel, the lower the activation energy of the transition state in the system is affected. © 2005 Wiley Periodicals, Inc. Int J Quantum Chem, 2005     

Slurry nebulization ICP-AES spectrometry method for the determination of tin in organotin(IV) complexes

This paper proposes a quick, novel method for tin determination in organotin chemicals by slurry nebulization inductively coupled plasma atomic emission (ICP-AES) spectrometry. The method was tested by the measurement of five organotin carboxylate complexes of known composition for obtaining simple stoichiometric data. The slurries were prepared by first dissolving the organotins in an adequate solvent (methanol, pyridine or acetone) well miscible with water and then adding this solution drop-by-drop to a 0.005% TX-100 tenzide solution while maintaining intensive mixing. Dynamic laser light scattering experiments showed that the average equivalent particle size in the resulting slurry was ≈0.3 μm for all samples and solvents. Under suitable ICP-AES measuring conditions, the signal recoveries were found to be between 101.8 and 106.6%, which allowed direct nebulization and calibration against aqueous solutions. Typically, 70 μg l⁻¹ detection limit and 1–5% relative S.D. on five replicates can be achieved by the described method.     

Solvent effect on pyridine derivatives. Molecular iodine donor-acceptor equilibria. The isoquinoline-I2-organic solvent system and the 2,4-lutidine-I2-organic solvent system

The absorption spectra of isoquinoline-iodine or 2,4-lutidine-iodine solutions in organic solventsn-hexane,n-heptane, cyclohexane, carbon tetrachloride, benzene, toluene, chlorobenzene, ando-dichlorobenzene have been measured and interpreted in terms of the D+I₂=DI₂ equilibrium, where D is isoquinoline or 2,4-lutidine. Values ofK (288–320°K), ΔH^o, and ΔS^o for the reaction were calculated. A correlation between theK values and the solubility parameter of the solvent (Buchowski's relation) has been found.     

Two new tetranuclear complexes of the macrocyclic oxamide [MCu3] (M = Cd, Mn, macrocyclic oxamide = 1,4,8,11-tetraazacyclotradecanne-2,3-dione): syntheses, spectra and magnetic properties

Two new tetranuclear complexes of macrocyclic oxamide [Cd(CuL)₃](NO₃)₂·2.5H₂O 1, [Mn(CuL)₃(OH)₂](ClO₄)₂·Mn(H₂O)₆·4.5H₂O 2 (L = 1,4,8,11-tatraazacyclotradecanne-2,3-dione) have been synthesized, structurally characterized and preliminary investigated by magnetic studies. The structures of the title complexes consist of a tetranuclear units MCu₃ (M = Cd, Mn), the packing diagram shows two-dimensional and three-dimensional system through intermolecular weak interactions. The temperature-dependent magnetic susceptibilities of complex 2 were analyzed by an approximate treatment leading to J = −33 cm⁻¹, g_Cu = 2.10, g_Mn = 1.95 indicating antiferromagnetic exchange between Cu(II) and Mn(II) ions.     

Bioinspired manganese complexes catalyzed epoxidation for the synthesis of the epoxyketone fragment of carfilzomib

We report herein an efficient catalytic epoxidation reaction for the synthesis of epoxyketone (tert-butyl ((S)-4-methyl-1-((R)-2-methyloxiran-2-yl)-1-oxopentan-2-yl)carbamate), which is an important synthetic intermediate of carfilzomib.     

Cobalt(II) and nickel(II) complexes of a cyclam derivative as carriers in iodide-selective electrodes

The ligand 1,4,8-tri(n-octyl)-1,4,8,11-tetraazacyclotetradecane (L¹) containing pendant octyl groups has been synthesised. L¹ is a tetraazamacrocycle derived from the well-known cyclam unit, and the Ni²⁺ and Co²⁺ complexes, [Ni(L¹)]²⁺ and [Co(L¹)]²⁺, have been isolated and characterised. The ability of the nickel(II) and cobalt(II) complexes to act as anion receptors has been studied by using them as ionophores in membrane-based ion-selective electrodes (ISEs). The PVC membrane containing the complex [Ni(L¹)]²⁺ and 2-nitrophenyloctylether as plasticizer shows a Nernstian response against iodide in a concentration range from 1×10⁻¹ to 4×10⁻⁵ M I⁻ with a detection limit of 1.6×10⁻⁵ M I⁻ and a slope of 58.6 mV/pI⁻ at pH 7 (25 °C). In comparison, the electrode containing [Co(L¹)]²⁺ as ionophore gave a sub-Nernstian slope and a low lifetime. A comparison between the iodide-selective electrode containing [Ni(L¹)]²⁺ and other reported iodide-selective electrodes is also reported.     

Voltammetric, chronocoulometric and spectroelectrochemical studies of electropolymerized films based on Co(III/II)- and Zn(II)-4,9,16,23-tetraaminophthalocyanine: effect of high pH

Electropolymerized thin films of Co(III/II)- and Zn(II)-4,9,16,23-tetraaminophthalocyanine, immersed in solutions of relatively high pH, have been studied electro- and spectroelectrochemically. Cyclic voltammetry and chronocoulometry were used to characterize films deposited on glassy carbon electrodes. Spectroelectrochemistry and ellipsometry measurements were performed on indium tin oxide (ITO) surfaces coated with the zinc and cobalt complexes and correlated to the electrochemical information collected using glassy carbon electrodes. Studies at high pH are motivated by the efficient increase in luminol chemiluminescence at high OH⁻ concentration, and by potential application in luminescence sensors. Although the films are not removed, some structural changes occur when they are exposed to solutions of high pH. In addition, an estimation of the number of monolayers has also been calculated. The atomic diameters of cobalt and zinc are very close in value, but the estimated number of monolayers, based on cyclic voltammetric data, for a given number of electropolymerization cycles is approximately four-fold higher in the zinc-based film. This would correspond to three-fold thicker films when zinc is the central metal ion. Ellipsometry measurements have been correlated with cyclic voltammetric data to confirm that film thickness varies among the different complexes, even though the conditions of electropolymerization are the same.