氧化亚铜微/纳米结构的形貌可控制备及光催化和防污性能

利用简便易行的液相法,采用葡萄糖为还原剂,通过调整加料方式、反应温度、NaOH用量等条件,实现具有{110}截面八面体、八面体和短足形等形貌的Cu₂O微/纳米结构的可控制备,运用透射电子显微镜、扫描电子显微镜、紫外可见分光光度计等对产物进行组成、结构、形貌和光响应的表征,对Cu₂O的形貌结构和生长机理进行研究。对比和优化了具有不同形貌的Cu₂O微/纳米结构对甲基橙染料的光催化性能。将不同形貌的微/纳米Cu₂O作为防污剂复配的自抛光防污涂料,涂层磨蚀率、接触角与实海挂板实验证明该涂料具有良好的防污性能。     

非完全汽化气相色谱法测定溶剂型涂料中的微量苯、甲苯、二甲苯

用乙酸乙酯稀释溶剂型涂料样品，在较低的汽化温度下直接进样，溶剂型涂料中未汽化的组分留在汽化室里，而苯、甲苯和二甲苯汽化后进入毛细管，用气相色谱法氢火焰离子化检测器进行检测，与国家标准分析方法进行比较，该法具有操作简单、精密度高等优点。     

高效液相色谱-串联质谱法测定泡沫灭火材料及其他材料中的全氟辛烷磺酸及其盐

建立了一种高效液相色谱-串联质谱(HPLC-MS/MS)测定泡沫灭火材料、洗涤剂以及织物整理剂中全氟辛烷磺酸及其盐(PFOS)的方法。对应产品中的PFOS用水超声提取后,经固相萃取柱淋洗萃取,萃取液以乙腈-10 mmol/L乙酸铵溶液(80:20, v/v)为流动相进行HPLC分离,在负离子模式和多级反应监测(MRM)方式下进行测定。用两个子离子的相对丰度定性,外标法定量。PFOS的测定在0.002~0.1 mg/L范围内线性关系良好(r2=0.998);泡沫灭火材料、洗涤剂以及织物整理剂中PFOS的加标回收率分别为93.4%～103%, 93.2%～102%和91.8%～102%,精密度(以相对标准偏差(RSD)计)分别为0.48%～3.52%, 0.78%～1.79%和0.47%～3.47%;方法的检出限均为2 mg/kg(0.0002%)(信噪比（S/N）≥10),满足欧盟法规对泡沫灭火材料、洗涤剂以及织物整理剂中PFOS的限量检测要求。该方法准确度和灵敏度高,前处理简单,可用于泡沫灭火材料、洗涤剂以及织物整理剂中PFOS的检测。     

ICP-AES法测定油漆涂层中总铅含量的不确定度评定

根据EURACHEM/C ITAC 2000中的规定评定了ICP-AES法测定油漆中总铅含量的不确定度。结果表明,标准曲线拟合线性方程、标准工作液配制过程、样品重复性分析及消化过程中消化回收率是不确定度的主要来源。油漆涂层中的可溶性铅的检测结果可表示为:(162.7±19.0)mg/kg(k=2)。     

超声萃取/液相色谱-串联质谱法测定染整助剂中的二硬脂基二甲基氯化铵

建立了超声辅助萃取/液相色谱-串联质谱( LC - MS/MS)测定染整助剂中二硬脂基二甲基氯化铵(DSDMAC)的方法.将样品以甲醇为萃取溶剂进行超声萃取,萃取液经过滤后采用LC-MS/MS测定.采用电喷雾离子源,定性离子对为m/z 550.5/298.3、522.5/298.3、522.5/270.3、494.5/...     

超耐候乳胶漆的研究

以常用工艺制备乳胶漆,严格按照国标GB／T9755～2001《合成树脂乳液外墙涂料》,测试了乳胶漆的耐水性、耐碱性、耐擦洗性和耐候性,研究了不同类型乳液、不同颜料体积分数（PVC）、不同粉体对乳胶漆的影响。结果表明,使用硅丙乳液、PVC为0．49％且颜料为金红石型钛白粉时,乳胶漆的耐候性最好。     

Micellar core-shell-type acrylic-polyurethane hybrid materials with self-polishing property

Abstract

Marine fouling can be a serious problem in the shipping industry, since it increases the surface roughness of the hull and hence its frictional resistance to its movement through water. Antifouling paint can be defined as preventing the attachment of marine organisms onto surfaces. However, the most commonly used antifouling coating which is the tributyltin-based self-polishing copolymer causes the severe pollution of marine environment. Ammonium salt-based paints include tertiary amines as biocides which have effective biocidal and biodegradable properties without accumulation in the sea environment. However, ammonium salt-based coatings were too sensitive to seawater and became swollen. In this study, polyurethane-acrylic copolymers were synthesized by radical polymerization. These hybrid materials were found to form core–shell structures in aqueous media. Synthesis and properties of copolymers were investigated by Fourier transform-infrared spectrometer, proton-nuclear magnetic resonance, transmission electron microscopy, and dynamic light scattering. The polishing rate of self-polishing copolymer was determined from the reduction in dry film thickness after artificial seawater immersion under a dynamic condition.     

低污染高固体份醇酸树脂涂料研究

高固体份、低污染是涂料的发展方向。醇酸树脂的高固体化对于环保非常重要，因而我们研究它的特点、合成、成漆要素以及配方实例将很有现实意义．     

PREPARATION AND APPLICATION OF A NEW ANTIFELTING RESIN FOR WOOL FABRICS

In this paper,a new resin called Resin M for imparting antifelting properties to wool fabricshas been studied.Resin M may be used by aqueous oxidative/polymer technique.It is provedthat Oxidant A/Resin M treatment can satisfy the machine washable requirement formulated byI.W.S..Resin M is a good agent for antifelting treatment of wool fabrics with proper pretreatment.Oxidant A/Resin M treatment has little influence on dyeing and moisture adsorption properties ofwool fibers.The pilling resistance of the treated fabrics is higher than that of the untreated ones.The strength and the handle of the treated fabrics have little been changed.According to thescanning electron microscope observations,it is recommended that the polymer encapsulation ofindividual fiber also plays an important role in the felting resistance of the treated fabrics though itis well known that the shrink resistance of the treated fabrics is believed to be due to the binding offibers.     

置换膜形成过程研究

本文研究了钢铁表面铜、锡、镍等金属或合金置换膜的形成条件与形成过程,并给出了相应的工艺技术条件。