微孔介质上气泡形成规律的研究

用激光测试技术对微孔介质上气泡形成规律进行了研究。实验结果表明,在微孔介质上所形成气泡的 Ｓａｕｔｅｒ平均直径随通气量的增大而减小;液相中盐或醇的引入使形成的气泡直径明显减小。使用不同模型的计算结果表明,单一孔上气泡形成模型难以描述微孔介质上气泡形成规律。为了描述微孔介质上气泡形成过程,不仅要考虑孔径减小带来的影响,而且要考虑操作条件及体系性质的变化对实际生成气泡的“有效孔”数目及当量直径等因素的影响。     

Beiträge zur Chemie der Pyrrolpigmente, 70. Mitt.: Zum aktiven Transport mit tripyrrinoiden Liganden

The tripyrrin carboxylic acid6 exhibits a pronounced efficiency for carrier mediated proton driven secondary active transport (counter transport) for a series of toxic or valuable cations in a bulk chloroform membrane. In case of Zn⁺⁺ ions the mechanism including complete concentration profiles forNerst diffusion layers and bulk phase have been established. This compound might be used for detoxification or enrichment of precious metals using membrane separation systems.

Herrn Prof. Dr.A. Neckel mit den besten Wünschen zum 60. Geburtstag gewidmet.     

Theoretical approach and the practice to the evaluation of structural parameters characterizing concentration polarization alongside ion-exchange membranes by means of dielectric measurement

As the application of a dielectric theory proposed previously (J Membrane Sci 64:153–161 (1991)), theoretical formulation and the practical procedure of dielectric analysis are developed to calculate the structural parameters such as the conductivity gradient and the thickness of the concentration polarization layer, the capacitances and the conductances of the two adjoining aqueous phases from the observed dielectric parameters. The procedure of calculation consequent upon the theoretical formulation was applied to double relaxation data observed for cation-exchange membrane systems under application of d.c. bias voltage. As a consequence, the structural parameters of concentration polarization were readily obtained with accuracy.     

Preparation and properties of insoluble films of cyclodextrin condensation polymers

The preparation and properties of smooth and stable films of cyclodextrin polymers are described. The commercially available water soluble prepolymers of-, -, and-cyclodextrin of low molecular masses were crosslinked with glutaric dialdehyde. Side-chain unreacted aldehyde groups were reduced with sodium borohydride. For the-cyclodextrin polymer, optimum film performance was found for a 1:10 mass ratio of glutaric dialdehyde to prepolymer, which corresponds to a molar ratio of glutaric dialdehyde to cyclodextrin units of about 1.75: 1. Such films, of thickness 2.4 µm, were prepared on metallic or glassy-carbon substrates for characterization by scanning-electron microscopy, and for studies with the electrochemical quartz-crystal microbalance.     

Adsorption of an amphipatic copolymer on a kidney dialysis membrane

We have studied the adsorption of a copolymer of acrylonitrile and methacrylate of nonaethyleneglycol on a kidney dialysis membrane, which contains mostly nitrile groups. The kinetics study reveals at first a rapid increase of the adsorbance, followed by slow variations suggesting rearrangements at the interface. The isotherms do not present a true plateau at high concentration. The high adsorbance observed at low pH or high salt concentration could be related to the ability of polyethyleneoxide to form a complex with cations.     

Amperometry of Heparin Polyion Using a Rotating Disk Electrode Coated with a Plasticized PVC Membrane

Electrochemical method of detection of heparin polyion was developed based on voltammetry of heparin on a rotating glassy carbon (GC) electrode coated with a plasticized PVC membrane. The membrane was deposited on the GC disk by spin‐coating technique using a mixture of solutions of PVC in tetrahydrofuran, and 1,1′‐dimethylferrocene (DMFc) and hexadecyltrimethylammonium tetrakis(4‐chlorophenyl)borate (HTMATPBCl) in o‐nitrophenyl octyl ether. UV/vis reflection spectrometry was used to evaluate the membrane thickness, which exhibits a linear correlation with the membrane resistance measured by impedance spectroscopy. It is shown that this electrode can be used for amperometric or coulometric detection of heparin in aqueous samples of medically relevant concentrations (1–10 U mL^?1), with a detection limit of 1.4 U mL^?1. Evidence is provided indicating that the current determining step is the reversible adsorption of the ion‐pair of heparin polyion with HTMA⁺ cation at the membrane/aqueous electrolyte interface, which is driven by oxidation of DMFc at the GC/membrane interface.     

Interaction of water with the regenerated cellulose membrane studied by DSC

One to three endothermal peaks atributted to melting of bulk and interfacial water were observed by DSC in the regenerated cellulose — water system. The profiles of thermal effects depend on water content, time of conditioning, film pretreatment and the conditions applied during the preceding freezing-thawing cycles. The occurrence might be deduced of melting-crystallisation processes. A large amount of non-freezable strongly bounded water was also detected. Although cellulose absorbs water quickly after immersion, the structural changes consisting on ordering of polymer fraction occur during further conditioning due to increase in strength of water binding. Using the membranes in the separation module at 90°C causes weakening of these bonds. Differences between interaction of particular cellulose films with water can be detected during the first, the second and the third heating. This revised version was published online in July 2006 with corrections to the Cover Date.     

Electroreductive polymerization of phenylmethyldichlorosilane in a divided cell using a neutral membrane

Electrochemical formation of poly(phenylmethylsilane) in a divided cell containing a Teflon® neutral membrane was studied. The electrolysis of dichlorosilanes was carried out in a solution containing tetrahydrofuran + hexamethylphosphoramide as the solvent, tetrabutylammonium perchlorate as the support electrolyte and stainless steel as the cathode, with Pt and graphite as the resistant anodes or stainless steel as the sacrificial anode. Polysilanes with a number-average molecular weight in the range from 2,600 to 130,000 g/mol were obtained, depending on the conditions used.     

Solvent extraction and bulk liquid membrane transport of Co(II) and Ni(II) ammine cations by proton-ionizable crown ethers

Separation efficiencies and selectivities in solvent extraction of Co(II) and Ni(H) ammine cations from aqueous solutions into chloroform and toluene and in transport through bulk toluene membranes by proton-ionizable crown ethers have been determined. Six proton-ionizable crown ethers with differing lipophilicities, polyether cavity sizes and ionizable groups (carboxylic and sulfonic acid functions) were examined. Higher selectivity and efficiency for Co(II) ammine cation extraction was observed for the more lipophilic, proton-ionizable crown ethers. Highly lipophilic crown carboxylic acids provided effective and selective transport of Co(II) ammine cations through bulk toluene membranes.Presented in part at the 6th International Symposium on High Purity Materials in Science and Technology: Preparation, Characterization and Application of Well-Defined Materials, Dresden, GDR, May 1985, Poster D91, Poster Abstracts, pp. 144, 145.All extraction and transport experiments were conducted at this location.