Supported Liquid Membrane Work-Up of Blood Plasma Samples Coupled On-Line to Liquid Chromatographic Determination of Basic Antidepressant Drugs

An automated sample pretreatment of human blood plasma for liquid chromatographic determination of three antidepressant drugs, dibenzepine; a tricyclic antidepressant (TCA), reboxetine; a selective noradrenaline reuptake inhibitor (SNRI) and fluvoxamine; a selective serotonin reuptake inhibitor (SSRI), based on supported liquid membrane (SLM) for unsurpassed sample clean-up and analyte enrichment, has been developed. The chromatograms after enrichment of plasma blank and aqueous blank are virtually indistinguishable. The entire analytical procedure revealed good linearity and low detection limits of 5, 15 and 20 ng mL^–1 for dibenzepine, reboxetine and fluvoxamine, respectively. No carry-over effects were noted. The repeatability of extraction at three concentrations in the range 40–150 ng mL^–1 for the three drugs was between ca. 3% and 7% as relative standard deviation. The reproducibility relative standard deviation during three different days (replacing the membrane each day) was not significantly higher.     

液膜稳定性的研究

利用单滴法对三种表面活性剂的液膜体系的稳定性进行了研究，重点考察了载体的影响，讨论了介质与表面活性剂，介质与载体，载体与表面活性剂的相互作用对液膜稳定性的影响，并根据膜强度数据，给出了液膜稳定的条件。     

Facilitated transport of Hg(II) through novel activated composite membranes

The results presented in this work deal with the prime application of activated composite membranes (ACMs) for the transport of Hg(II) ions in a continuous extraction–re-extraction system using di-(2-ethylhexyl)dithiophosphoric acid (DTPA) as carrier. The effects of variables such as the pH, the nature of the acid and the concentration of the casting solutions on the transport of Hg(II) are also investigated. When the ACM was prepared with a 0.5 M DTPA solution and when the feed solution contained 2.5×10^–4 M Hg(II) in 0.1 M HCl, the amount of mercury extracted was greater than 76%. The re-extracted mercury was subsequently recovered by means of a stripping phase comprising 0.3 M thiourea solution in 2 M H₂SO₄, yielding 54% of the initial amount of mercury after transport had taken place for 180 min.     

Studies on the Complexes of N,N′-Bis[o-(diphenylphosphino)benzylidene]ethylenediamine with Transition Metal Ions

The thermodynamic parameters for the interaction of Cu²⁺, Ni²⁺, Co²⁺, Cd²⁺, andAg⁺ with the new title ligand have been determined by titration calorimetry in 50% THF–methanol (V/V) at 25 °C.Ag⁺ exhibited remarkably higher complexation selectivity.Ag⁺ and several transition metal ions have been transportedusing this ligand as carrier in a bulk liquid membrane. CompetitiveAg⁺–M²⁺ transport studies have also beencarried out for the same system. In this membrane transport study, high transport of Ag⁺ was observed in both single and competitiveAg⁺–M²⁺ transport studies. The complexformation of N,N-bis[o-(diphenylphosphino)benzylidene]ethylenediamine (P₂N₂) with silver,[Ag(P₂N₂)] (NO₃), (1) is reported. Complex 1 has been characterized by X-ray crystallography. 1 ismonoclinic, space group P2_1/n (No. 14), with cell dimensionsa = 13.398(4) , b=12.577(5) , c = 21.521(4) , =100.14(2) , V = 3570(2) ³ and Z = 4.     

Specific Uphill Transport of Zinc as Zn(SCN)42− Ion using Na+-Dicyclohexyl-18-Crown-6 as Carrier

Sodium-dicyclohexyl- 18-crown-6 complex cation was used as carrier for the uphill transport of zinc as Zn(SCN)₄^2? complex anion. By using L-cysteine as a metal ion acceptor in the receiving phase at the optimized pH of 7.6, the amount of zinc transport through the liquid membrane after 90 min was 97.2 ± 1.0%. The selectivity and efficiency of zinc transport from aqueous solutions containing equimolar mixtures of Ag⁺, Cd²⁺ Co²⁺, Cu²⁺, Fe²⁺, Ni²⁺, Pb²⁺, Pd²⁺, Sr²⁺, Bi³⁺, Cr³⁺ and Fe³⁺ ions was investigated. In the presence of NH₂OH.HCl as a suitable masking agent in the source phase, the interfering effect of Cu²⁺ and Pb²⁺ ions was diminished drastically.     

A sequence and structural study of transmembrane helices

A comparison is made between the distribution of residue preferences, three dimensional nearest neighbour contacts, preferred rotamers, helix-helix crossover angles and peptide bond angles in three sets of proteins: a non-redundant set of accurately determined globular protein structures, a set of four-helix bundle structures and a set of membrane protein structures. Residue preferences for the latter two sets may reflect overall helix stabilising propensities but may also highlight differences arising out of the contrasting nature of the solvent environments in these two cases. The results bear out the expectation that there may be differences between residue type preferences in membrane proteins and in water soluble globular proteins. For example, the -branched residue types valine and isoleucine are considerably more frequently encountered in membrane helices. Likewise, glycine and proline, residue types normally associated with `helix-breaking' propensity are found to be relatively more common in membrane helices. Three dimensional nearest neighbour contacts along the helix, preferred rotamers, and peptide bond angles are very similar in the three sets of proteins as far as can be ascertained within the limits of the relatively low resolution of the membrane proteins dataset. Crossing angles for helices in the membrane protein set resemble the four helix bundle set more than the general non-redundant set, but in contrast to both sets they have smaller crossing angles consistent with the dual requirements for the helices to form a compact structure while having to span the membrane. In addition to the pairwise packing of helices we investigate their global packing and consider the question of helix supercoiling in helix bundle proteins.     

TiO2/P(VdF-HFP)杂化纤维微孔膜的制备及其电化学性能

用电纺法制备了TiO₂/P(VdF-HFP)(聚偏氟乙烯-六氟丙烯共聚物)杂化纤维微孔膜, 用SEM观察了杂化纤维微孔膜的形貌, 并测算了这类由超细纤维相互搭接而形成的微孔膜的孔隙率. 这种微孔膜吸附LiPF₆/EC-DMC-EMC(碳酸乙烯酯-二甲基碳酸酯-碳酸甲乙酯)电解质溶液后得到凝胶聚合物电解质膜. 用电化学方法测试了聚合物电解质膜的离子电导率、锂离子迁移数等参数, 并研究了TiO₂纳米晶的掺入对聚合物电解质电化学性能的影响. 结果表明, TiO₂的掺入降低了P(VdF-HFP)聚合物基体的结晶度, 改善了凝胶聚合物电解质的低温电化学性能.     

Studies of the Methane Steam Reforming Reaction at High Pressure in a Ceramic Membrane Reactor

The effects of temperature and pressure on the steam reforming of methane 3H2+CO) were investigated in a membrane reactor (MR) with a hydrogen permeable membrane. The studies used a novel silica-based membrane prepared by using the chemical vapor deposition (CVD) technique with a permeance for H2 of 6.0×l0-8 mol·m-2·s-1·Pa-1 at 923 K. The results in a packed-bed reactor (PBR) were compared to those of the membrane reactor at various temperatures (773-923 K) and pressures (1-20 atm, 101.3-2026.5 kPa) using a commercial Ni/MgAl2O4 catalyst. The conversion of methane was improved significantly in the MR by the countercurrent removal of hydrogen at all temperatures and allowed product yields higher than the equilibrium to be obtained. Pressure had a positive effect on the hydrogen yield because of the increase in driving force for the permeance of hydrogen. The yield of hydrogen increased with pressure and reached a value of 73×10-6 mol·g-1·s-1 at 2026.5 kPa and 923 K which was higher by 108% than the value of 35×10-6 mol·g-1·s-1 obtained for the equilibrium yield. The results obtained with the silica-based membrane were similar to those obtained with various other membranes as reported in the literature.     

基于芘的荧光熄灭的单质碘荧光敏感膜的研究

单质碘熄灭固定于增塑的ＰＶＣ膜中的芘的荧光，且这种熄灭作用可逆。本据此研制了用于测定单质碘浓度的荧光敏感膜，最佳膜组成为２～４ｍｇ芘、５０ｍｇＰＶＣ粉、１００ｍｇ邻苯二甲酸二异辛酯，测定碘的浓度范围为２．２６×１０＾－５～１．０４×１０＾－３ｍｏｌ／Ｌ。此膜测定单质碘的重现性好，响应时间小于４０ｓ。除Ｆｅ＾３＋、Ｂｉ＾３＋外，其它常见离子均无干扰。将此膜用于食盐中碘的测定，结果令人满意。     

Improving the properties of the proton exchange membranes by introducing α-methylstyrene in the pre-irradiation induced graft polymerization

New proton exchange membranes (PEMs) were prepared by pre-irradiation induced grafting of α-methylstyrene (AMS)/styrene (STY)/divinylbenzene (DVB) into the crosslinked polytetrafluoroethylene (RX-PTFE) films and successively sulfonated. The new PEMs showed the improved glass transition temperature and chemical stability as compared with the PEMs prepared by pre-irradiation induced grafting of STY/DVB. The balance of the cost, grafting kinetic, thermal properties and the properties of the resulted proton exchange membrane is the key point of this work.