Improved detection of multi-phosphorylated peptides in the presence of phosphoric acid in liquid chromatography/mass spectrometry

In contrast to lower phosphorylation states (e.g. the tryptic monophosphopeptide FQpSEEQQQTEDELQDK from bovine beta-casein), the specific detection of multi-phosphorylated peptides (e.g. the tetraphosphopeptide RELEELNVPGEIVEpSLpSpSpSEESITR from tryptic digestion of bovine beta-casein) has often been problematic for liquid chromatographic mass spectrometric (LC/MS) analysis owing to their high affinity for adsorption to exposed surfaces. We observed an enhancement in the overall detection of phosphopeptides on addition of phosphoric acid (0.1-1.0%) to the sample solution; a 10-fold increase in sensitivity was determined for the detection of two tryptic phosphopeptides and also a significant improvement in the detection of the tetraphosphopeptide. Using capillary LC with ion trap tandem MS for detection and identification, the achievable detection limits were 50 fmol and 50 pmol for the monophosphopeptide and the tetraphosphopeptide, respectively. Phosphoric acid is believed to act as a blocking agent to available silanol groups on both the silica capillary surface and the C(18)-bonded stationary phase silica surface.     

Free energies of transfer of alkali halides from water to urea-water mixtures at 25°C from EMF measurements

The standard potentials_s E ^o of M/M⁺ (M=Li, Na, K, Rb, and Cs) electrodes in aqueous urea solutions containing 12, 20, 30 and 37% by weight of urea have been determined at 25°C from emf measurements on the cell M(Hg)/MCl (m), solvent/AgCl–Ag, from the activities of metals in amalgams by use of a similar type of cell in water, and from the values of_s E ^o of the Ag/AgCl electrode determined earlier. The standard free energies of transfer of MCl, G _t ^o (MCl), from water to the mixed solvents, computed by use of these values and those for the Ag–AgCl electrode, rise sharply from Li⁺ to Na⁺ but fall from Na⁺ to K⁺ and rather sharply from K⁺ to Cs⁺ with a maximum at Na⁺ in all the solvent compositions. This has been attributed to the superimposition of soft-soft interactions on the electrostatic interactions between the ions and the negative charge centers of the possible hydrogen-bonded solvent complexes in the mixed solvents. Comparison of G _t ^o (i) values for individual ions, obtained by a simultaneous extrapolation procedure, with those in aqueous mixtures of methanol,t-butanol, and dimethyl sulfoxide leads to the conclusion that the solvation of these ions in all these solvents is chiefly dictated by the acid-base type of ion-solvent interactions.     

Chloride distribution coefficient on strongly basic anion-exchange resin: Dependence on co-ion in alkali fluoride solutions

Summary The dependence of the chloride distribution coefficient on the co-ion of solutions of different alkali fluorides, MF, up to 11M is tested on the strongly basic anion-exchange resin AG1-X10. Under the same experimental conditions the distribution coefficient decreases in the following order for M⁺: Na⁺>K⁺>Rb⁺>Cs⁺. This can be explained by the different co-ion-chloride interactions. The consequence of this interaction for a chromatographic separation of chloride is shown with 5M KF and CsF solutions, used as eluants. Depending on the fluoride concentration, the distribution coefficient passes through a minimum value to increase again at higher electrolyte concentration. The non-exchange electrolyte in the resin phase is responsible for this effect. In addition, the bromide and the iodide distribution coefficients up to 10M KF solutions are determined. One results is that the selectivity coefficient between halide ions increases at higher electrolyte concentrations.     

Steroid polyols from the Far-Eastern starfish Henricia sanguinolenta

A new polyhydroxylated steroid (20R,24S)-5-cholestane-3,6,15,24-tetraol and a known glycoside, laeviuscoloside G, was isolated from the Far-Eastern starfish Henricia sanguinolenta, collected in the sea of Okhotsk, and characterized.     

Structure‐Dependent Photoinduced Electron Transfer in Fullerodendrimers with Light‐Harvesting Oligophenylenevinylene Terminals

Oligophenylenevinylene (OPV)‐terminated phenylenevinylene dendrons G1 – G4 with one, two, four, and eight “side‐arms”, respectively, were prepared and attached to C₆₀ by a 1,3‐dipolar cycloaddition of azomethine ylides generated in situ from dendritic aldehydes and N‐methylglycine. The relative electronic absorption of the OPV moiety increases progressively along the fullerodendrimer family C₆₀G1 – C₆₀G4 , reaching a 99:1 ratio for C₆₀G4 (antenna effect). UV/Vis and near‐IR luminescence and transient absorption spectroscopy was used to elucidate photoinduced energy and electron transfer in C₆₀G1 – C₆₀G4 as a function of OPV moiety size and solvent polarity (toluene, dichloromethane, benzonitrile), taking into account the fact that the free‐energy change for electron transfer is the same along the series owing to the invariability of the donor–acceptor couple. Regardless of solvent, all the fullerodendrimers exhibit ultrafast OPV→C₆₀ singlet energy transfer. In CH₂Cl₂, the OPV→C₆₀ electron transfer from the lowest fullerene singlet level (¹C₆₀*) is slightly exergonic (ΔG_CS≈0.07 eV), but is observed, to an increasing extent, only in the largest systems C₆₀G2 – C₆₀G4 with lower activation barriers for electron transfer. This effect has been related to a decrease of the reorganization energy upon enlargement of the molecular architecture. Structural factors are also at the origin of an unprecedented OPV→C₆₀ electron transfer observed for C₆₀G3 and C₆₀G4 in apolar toluene, whereas in benzonitrile, electron transfer occurs in all cases. Monitoring of the lowest fullerene triplet state by sensitized singlet oxygen luminescence and transient absorption spectroscopy shows that this level is populated through intersystem crossing and is not involved in photoinduced electron transfer.     

Extension of conjugation leading to bathochromic or hypsochromic effects in OPV series

Four OPV series 1-4 (a-d) with a terminal dialkylamino group as electron donor were prepared by Wittig-Horner reactions. To study the influence of the push-pull effect on the long-wavelength absorption, three of the four series contained terminal acceptor groups (CN, CHO, NO(2)). The length of the chromophores strongly affects the intramolecular charge transfer (ICT)-an effect which superimposes upon the extension of the conjugation. Increasing numbers n of repeat units cause an overall bathochromic shift for the purely donor-substituted series 1 a-4 a and the series 1 b-4 b with CN as weak acceptor. The two effects annihilate each other in the series 1 c-4 c with terminal CHO groups, so that the absorption maxima are almost independent of the length of the chromophore. A hypsochromic shift is observed for the series 1 d-4 d, which contains the strong acceptor group NO(2). This anomaly disappears on protonation of the dialkylamino group because the push-pull effect disappears in the ammonium salts. The results can be explained by semiempirical quantum mechanics (AM1, INDO/S). The HOMO-LUMO transition, which is mainly responsible for the ICT, becomes less important in the electron transitions S(0)-->S(1) when the distance between donor and acceptor is increased. The commonly used VB model, which contains an electroneutral and a zwitterionic resonance structure, is contrasted with a MO model with dipole segments at both ends of the OPV chains. The latter model turned out to be more appropriate-at least for donor-acceptor-substituted OPVs with n >/= 2.     

Direct Electrochemistry of Multi‐Copper Oxidases at Carbon Nanotubes Noncovalently Functionalized with Cellulose Derivatives

This study describes the direct electron transfer of multi‐copper oxidases, i.e., laccase (from Trametes versicolor) and bilirubin oxidase (BOD, from Myrothecium verrucaria) at multiwalled carbon nanotubes (MWNTs) noncovalently functionalized with biopolymers of cellulose derivatives, i.e., hydroxyethyl cellulose (HEC), methyl cellulose (MC), and carboxymethyl cellulose (CMC). The functionalization of the MWNTs with the cellulose derivatives is found to substantially solubilize the MWNTs into aqueous media and to avoid their aggregation on electrode surface. Under anaerobic conditions, the redox properties of laccase and BOD are difficult to be defined with cyclic voltammetry at either laccase/MWNT‐modified or BOD/MWNT‐modified electrodes. The direct electron transfer properties of laccase and BOD are thus studied in terms of the bioelectrocatalytic activities of the laccase/MWNT‐modified and BOD/MWNT‐modified electrodes toward the reduction of oxygen and found to be facilitated at the functionalized MWNTs. The possible application of the laccase‐catalyzed O₂ reduction at the laccase/MWNT‐modified electrode is illustrated by constructing a CNT‐based ascorbate/O₂ biofuel cell with the MWNT‐modified electrode as the anode for the oxidation of ascorbate biofuel.     

Solute-solvent interactions in water-tert-butyl alcohol mixtures. VI. Enthalpies of solution for halo-para-substituted benzoates

Enthalpies of solution of sodium benzoate, potassium benzoate, and potassium halo-substituted benzoates are reported at 298.15°K in water and in nine water-tert-butyl alchol mixtures. Transfer enthalpies from water to the mixed solvent go through a maximum for about 0.055 mole fraction of alcohol. Additivity of ionic contributions in the enthalpies of transfer is verified. Substituent effects on the transfer enthalpies of benzoates are discussed in terms of size of the solutes and cohesion of the solvent mixtures. For Part V, see ref. 1.     

Development in the area of UV-crosslinkable solvent-based pressure-sensitive adhesives with excellent shrinkage resistance

Solvent-based UV-crosslinkable pressure-sensitive adhesives (PSA) present a new class of products that offers the potential to produce a novel generation of ultraviolet cured self-adhesive products with excellent shrinkage resistance. A variety of solvent-based pressure-sensitive adhesives were prepared by synthesis in ethyl acetate with solid content on 50 wt.% with 2-ethylhexyl acrylate, methyl acrylate, acrylic acid, N-vinyl caprolactam and unsaturated photoinitiators: 4-acryloyloxy benzophenone, allyl benzoine and phenyl-(1-acryloyloxy)-cyclohexyl ketone. The main emphasis is given to the influence of viscosity and molecular mass of synthesized adhesive on their shrinkage. Further trials show the effect of the UV-crosslinking process with UV-lamp and comparison with acrylics PSA crosslinked with metal chelates aluminium acetylacetonate and titanium acetylacetonate on shrinkage. Further examinations describe the influence of various factors such as UV exposure time and UV dose on very relevant PSA performance such as shrinkage on coated PVC carrier.     

Plasma-chemical decomposition of methane during diamond synthesis

Using a mass spectrometric sampling method, we have observed the decomposition of CH₄ in an rf plasma usedfor diamond deposition. The gas samples were extracted through an orifice located downstream of the plasma zone and analyzed online. For the experiments a dilute mixture of H₂ and CH₄ containing 0.1–3% CH₄ has been used. CH₄ is converted to C₂H₂ and C₂H₄ quantitatively. Small amounts of heavier hydrocarbons are formed. A comparison of the experimental results with a recent kinetic model treating a purely thermal environment is made and the differences between our experiment and the model are explained. The role of acetylene as a species formed in an atmosphere rich in atomic hydrogen is proposed. The electron impact dissociation process is suggested as the rare-determining step in the plasma-chemical decomposition of methane.