Effect of pressure on the solubilities ofo-,m- andp-xylene in water

The solubilities of o-, m- and p-xylene in water were measured at 25.0°C up to 250, 385, and 50 MPa, respectively. The solubility increased with increasing pressure up to 120 MPa (50 MPa for p-xylene) and then decreased. The reaction volumes, V^o accompanying the dissolution at 0.1 MPa were estimated as –3.6±0.5, –3.4±0.5, and –4.1±0.5 cm³-mol^–1 for o-, m-, and p-xylene, respectively, from the pressure dependences of the solubilities. The limiting partial molar volumes, of p- and o-xylene in water under high pressure were estimated from V^o and the molar volume of the xylene. The partial molar volumes decreased with increasing pressure. The reaction volume for the formation of intra-molecular pairwise hydrophobic interaction between the methyl groups, as proposed by Ben-Naim, is discussed for the V^o of p- and o-xylene at 0.1 MPa.     

Clathrate formation in water-cyclic ether systems at high pressures

Experimental data on the investigation of the water-trimethyleneoxide system,P, t, x phase diagram (up to 6 kbar) are presented. The results are compared with those on water systems with ethyleneoxide, 1,3- and 1,4-dioxane, 1,3-dioxolane and tetrahydrofuran, on the basis of which a summarizedP, t, x diagram is plotted for water-cyclic ether systems. It is shown that in all the systems in which a cubic structure II hydrate forms at 1 bar, it eventually turns to cubic structure I under pressure. The nature of high pressure hydrates is discussed.Dedicated to the memory of D. W. Davidson.     

Characterization of some essential oils and their key components: Thermoanalytical techniques

The present study was aimed at determining the kinetics of evaporation and establishing vapor pressure curves for both single and multi-component systems by thermogravimetry (TG) and differential scanning calorimetry (DSC). Essential oils (e.g. lavender oil, orange oil, clove oil and eucalyptus oil, etc.) are typically multi-component systems consisting of various volatile pure components (e.g. linalyl acetate, limonene, cinnamaldehyde, etc.) which resemble single component systems. In this study linalyl acetate was taken as the calibration compound for TG. The vapor pressure curves for the pure substances were plotted using TG and vapor pressure plots for clove oil and eucalyptus oil were constructed using DSC. The thermodynamic and kinetic parameters of the pure compounds were compared to that of the multi-component systems to quantitatively and qualitatively measure the influence of different compounds on each other. The k-value from the vapor pressure data for linalyl acetate was calculated as 112006 Pa kg^0.5mol^0.5s^-1 m^-2 K^-0.5. The vapor pressure values were used to determine the Antoine constants using the SPSS 10.0 software.This revised version was published online in November 2005 with corrections to the Cover Date.     

Freezing temperatures and densities of solutions of some hydrocarbons and sodium oleate inN-methylacetamide. Evidence for a solvophobic interaction

The freezing temperatures and densities (at 31°C) of solutions of octane, nonane, decane, 3,3-diethylpentane, and sodium oleate inN-methylacetamide (NMA) have been measured. The molality of the freezing solution was calculated from the density. The solubilities of octane, nonane, and decane inN-methylacetamide are also reported. Apparent molal volumes calculated from the densities are close to the values in the pure hydrocarbons and are not strong functions of the concentration. This indicates the absence of any unusual packing effect. The calculated free energies of transfer of the hydrocarbons from pure hydrocarbon to NMA solution are much less negative than the corresponding values for water, showing that the bulk solvophobic interaction inN-methylacetamide is smaller than in water. This is consistent with the freezing temperatures of sodium oleate which show that micelles do not form below 0.1 mole-kg^–1. The osmotic coefficients of the hydrocarbons calculated from the freezing temperatures showed negative deviations from ideality that were larger for the hydrocarbons with the higher molecular weights. Two estimates of the pairwise solvophobic interaction inN-methylacetamide indicate that it is also smaller than in water. The solvophobic effect in this solvent does not include the large entropy and enthalpy effects found in aqueous solutions.     

Development of a new analytical method for the evaluation of hazards from slow decomposition of waste streams and process solutions

A wide variety of liquid streams are generated as part of the process research and development effort. Frequently these streams are drummed off, either as intermediates that must be held for processing or as wastes that must be sent off-site for disposal. Because of the long times and low concentrations often involved, current thermoanalytical techniques were inadequate to detect the potential of streams to generate gas. A custom-made apparatus, the gas evolution test cell (GETC), was developed in the Merck Research Laboratories to measure the gas generation potential of various streams under precisely defined conditions, is the key innovation for the development of a quantitative gas-generation test method.     

Magnetic phase transitions in nanostructures induced by shear stress under high pressure

Magnetic phase transitions of the first and second order were revealed by Mössbauer spectroscopy in nanosystems of - and -ferric oxides and metallic europium subjected to shear stress (240°) under high pressure (20 kbar). For - and -ferric oxide nanoclusters, the Curie (Neel) points decreased to 300 K, whereas for nanostructured europium the Neel point increased from 90 to 100 K. The thermodynamic model of magnetic phase transitions predicting a change in the character of magnetic phase transitions and a decrease (increase) in the critical Neel (Curie) points in nanoclusters was developed. The type of magnetic phase transitions and the change in the critical points were caused by defects in nanoclusters, whose maximum concentration was observed for the clusters with the 20—50 nm size range.     

An application of the modified Poisson- Boltzmann equation in studies of osmotic properties of micellar solutions

The spherical cell model of colloidal solutions is applied in calculations of the osmotic pressure of micellar systems. The predictions of the nonlinear Poisson-Boltzmann equation (MPB) and of the Modified Poisson-Boltzmann equation (MPB) containing the leading terms of the fluctuation potential and the exclusion volume corrections to the mean potential acting on simple ions are compared with the results of recent computer simulations. Both PB and MPB seem satisfactory for solutions with monovalent counterions while the MPB is preferable for studies of the solutions containing divalent countenons.On leave from the University of Ljubljana, Ljubljana, Yugoslavia     

Vapor pressure,speciation, and chemical activities in highly concentrated sodium borate solutions at 277 and 317°C

The system H₂O-B₂O₃-Na₂O has been studied experimentally at 277 and 317°C. The activities of water and boric acid have been determined at mole ratios Na/B from 0 to 1.5, and total dissolved solids 3 to 80 weight percent. The activity of boric acid has been fitted to within experimental error using a speciation model with eight complex species. This model is consistent with the model previously published by Mesmer et al. The electrolyte properties of the liquid are modeled using the Pitzer-Simonson model of very concentrated electrolyte solutions. The calculated values of water activity agree with experiment, and the activity of NaOH and pOH have also been calculated. The potassium borate system also was briefly studied at 317°C, and is adequately described by a model with five complex species. The potassium borate liquid is more alkaline at K/B= 1 than a sodium borate liquid at the same mole ratio, but pOH in the two systems is the same at lower mole ratios.     

表面膨胀粘度的测定研究

用不同浓度的NaCl和表面活性剂直链的十二烷基苯磺酸钠(LAS)、稳定剂聚丙烯酰胺和水所组成的泡沫体系为研究对象,通过表面压松弛的方法,利用计算机数据拟合,得到了计算表面膨胀粘度的方法。     

Solubility of α-amino acids in water under high pressure: glycine, -alanine, -valine, -leucine, and -isoleucine

The solubility of glycine, -alanine, -valine, -leucine, and -isoleucine in water was measured at 298.15 K and pressures up to 400 MPa. The standard deviation of the logarithm of the solubility is 0.001–0.003, equal to or better than the accuracy of atmospheric pressure measurement in the literature (0.001–0.05). A variety of solubility phenomena were observed. The solubility of glycine decreased with increasing pressure, whereas that of -alanine increased. The -valine and -isoleucine have a solubility maximum at around 100 MPa, and -leucine seems to exhibit a solid-phase phase transition at around 200 MPa. Pressure coefficient of the solubilities at 0.10 MPa is compared with that thermodynamically estimated in reference to aqueous density measurements of glycine and -alanine at 298.15 K and 0.10 MPa, supporting a reliability of our high-pressure measurements.