Conductivity Studies of Dilute Aqueous Solutions of Oxalic Acid and Neutral Oxalates of Sodium, Potassium, Cesium, and Ammonium from 5 to 35°C

Conductivity measurements of oxalic acid and neutral oxalates (disodium oxalate, dipotassium oxalate, dicesium, and diammonium oxalate) were performed on dilute aqueous solutions, c < 3 × 10^–3 mol-dm^–3, from 5 to 35°C. These data and those available from the literature were analyzed in terms of dissociation steps of oxalic acid, the Onsager conductivity equation for neutral oxalates, the Quint–Viallard conductivity equation for the acid, and the Debye–Hückel equation for activity coefficients, to give the limiting equivalent conductances of bioxalate anion ;(HC₂O₄ ^–) and oxalate anion (1/2C₂O₄ ^2–) and the corresponding dissociation constants K ₁ and K ₂.     

POLYMER-SUPPORTED LEWIS ACID CATALYSTS. Ⅵ. POLYSTYRENE-BONDED STANNIC CHLORIDE CATALYST

A polystyrene-bonded stannic chloride catalyst was synthesized by the method of lithium polystyryl combined with stannic chloride. This catalyst is a polymeric organometallic compound containing 0.25 mmol Sn (Ⅳ)/g catalyst. The catalyst showed sufficient stability and catalytic activity in organic reaction such as esterification, acetalation and ketal formation, and it could be reused many times without losing its catalytic activity.     

Enhanced Acid/Base Catalysis in High Temperature Liquid Water

High temperature liquid water (HTLW), as an environmentally benign medium, has drawn increasing attention for organic chemical reactions and biomass conversion1-3. HTLW has a strong tendency to ionize and can act as an acid and/or base catalyst. In addition, HTLW can dissolve organic compounds to some extent allowing for a homogenous reaction within an aqueous phase. Extensive researches4-10 have been pursued on acid/base-catalysis reactions in HTLW without addition of acid or base. Howe…     

以钛氧有机物为前驱物制备具有高光催化活性的纳米二氧化钛晶体

 纳米二氧化钛的制备方法及前驱物的差别影响其光催化活性．将20ml钛酸丁酯及30ml乙酐在密闭容器中与50ml环己烷混合，在70～85℃反应30min，生成微细的非晶钛氧有机物；经FT－IR和TGA分析，该物质被确认为计量式是TiOOOCCH3）2和TiO（OC4H9）（OOCCH3）的混合体．该钛氧有机物前驱物经焙烧后得到具有高光催化活性的纳米二氧化钛晶体．表征结果表明，钛氧有机物在焙烧过程中，其表面的吸附物及键合有机基团在400℃以前发生脱附和氧化分解；在389～405℃间形成锐钛矿型晶体，在600℃出现金红石晶型；600℃焙烧3h所得样品的比表面积为86m2／g，其二次粒子呈200～300nm条形体，孔隙大于20nm；单分散粒子为球形单晶，粒径为22nm；表面物理吸附水量为1．21％，加热至800℃时失重1．48％，粉体稳定纯净．光催化实验结果表明，以钛氧有机物为前驱物制备的纳米二氧化钛晶体具有高的光催化活性，光降解丁基罗丹明溶液的反应速率常数约为溶胶－凝胶法制备的催化剂样品的4倍．表面氧空缺和一定量的表面羟基可能是粉体具有高光催化活性的重要因素．     

基于Cz-DPP不对称D-A结构新型有机小分子光伏材料的合成与性质

本文设计合成了一系列以咔唑(CZ)和吡咯并吡咯二酮(DPP)为基本结构单元的D-A结构的新型小分子材料,并对其进行了一系列的性能表征.合成的材料以咔唑作为给电子单元,吡咯并吡咯二酮作为吸电子单元,采用三键作为π桥,并引入4-氟苯基、4-氰基苯基和4-甲氧基苯基作为末端取代基团对材料进行修饰.其中材料CZBTDPPF和CZBTDPPO因分别具有1.85和1.79 eV的较窄带隙而分别获得了相对较高的的光电转化效率(1.97%和1.91%).由此可见,引入4-氟苯基和4-甲氧基苯基作为末端取代基团对于延长材料共轭结构、拓宽材料吸收从而实现材料光伏性能的提升具有重要的作用.     

聚乙二醇在高真空条件下的单链弹性

在过去二十年间，高分子的单链弹性已经得到了广泛的研究.然而由于环境和高分子之间往往有着复杂的相互作用，实验中很难得到高分子在严格无扰状态下的单链弹性（即本征弹性）.为此，利用单分子力谱技术研究了高真空条件下聚乙二醇（PEG）的单链弹性.结果表明，由于高真空条件下溶剂分子的干扰被消除，PEG在这一准无扰状态下呈现其本征弹性.在非极性有机溶剂中，由于溶剂分子和PEG之间只有微弱的范德华力作用，PEG表现出和高真空中基本一致的弹性.然而，在不同环境中，力曲线的低力区（F<100 pN）存在着细微的差异.这一现象可归因于不同条件下基底与PEG链之间的吸附力不同.采用的高真空力谱可用于研究其他高分子单链在准无扰状态下的本征弹性.     

Redox troponization as a novel method for the synthesis of stereoisomeric Eschenmoser's oximes and related non-benzenoid aromatic systems

A novel method for the synthesis of the oxime of 4-methyl-2,4,6-cycloheptatrien-1-one (Eschenmoser's oxime) is proposed. The method involves redox enlargement of the ring of 4-dibromomethyl-4-methyl-2,5-cyclohexadien-1-one oxime through the action of Ni(PPh₃)₄ in DMF (in the presence of Zn). The product is formed as a mixture ofsyn- andanti-forms readily interconverting in solutions. A similar reaction of 4-methyl-4-trichloromethyl-2,5-cyclohexadien-1-one oxime afforded the dimer of agem--centered semiquinoid carbene (1,2-bis-(1-methyl-4-oxyimino-2,5-cyclohexadienyl)-1,2-dichloroethylene), together withsyn- andanti-isomers of 4-chloro-5-methyl-2,4,6-cycloheptatrien-1-one oxime, which are readily separable but also quickly interconverting in solutions. For the latter compounds, the complete¹H NMR assignment of the stereoisomeric structures has been carried out.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 519–523, March, 1995.The authors are grateful to the International Science Foundation (Grant MHW000) as well as the Russian Foundation for Basic Research (Project No. 94-03-08873) for the financial support of the work.     

Chelate synthesis of 2,2′-bipyridin-4-one

A method for the synthesis of 2,2′-bipyridin-4-one from 4-amino-4-(2-pyridyl)-but-3-en-2-onevia its diphenylboron, chelates was proposed. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2071–2073, November, 1997.     

Headspace solid-phase microextraction-gas chromatography-mass spectrometry applied to quality control in multilayer-packaging manufacture

A method based on headspace solid-phase microextraction-gas chromatography-mass spectrometry is proposed for the quality control of multilayer packaging and its manufacturing process. Volatile organic compounds (VOCs) are produced in the manufacturing process of the packaging. They can cause organoleptic problems or modify the properties of the packaging depending on the nature and the amount of the VOCs formed. The quantification using packaging samples with a known VOC concentration for the calibration is proposed in order to reduce the analysis time, and the method is validated using a statistical test. Finally, the method is applied to the determination of odour-responsible compounds in multilayer packaging samples obtained under different extrusion-coating conditions, i.e. type of extruder, type of polymer and extrusion speed.     

A novel oligothiophene derivative as a hole‐transport with emitting material for OLED

A novel oligothiophene derivative containing the triphenylamine moiety with high glass transition temperature (T_g; 135 °C), 5,5′‐{bis[4‐di(4‐thiophenyl)amino]phenyl}‐2,2′‐bithiophene (TTPA‐dimer) was synthesized by the dimerization of tris[4‐(2‐thienyl)phenyl]amine (TTPA) with a palladium catalysis. Some types of electroluminescent (EL) devices that use the amorphous material for a hole‐ and an electron‐transporting with an emitting layer were fabricated. These devices emitted a bright green‐yellowish light (λ_emi; around 510 nm) with a small full width at half maximum (FWHM) rather than that of Alq₃. The single layer EL device showed a maximum luminance of 221 cd/m² at 8 V (0.06 lm/W at 100 cd/m²). On the other hand, the double layer (TTPA‐dimer/Alq₃) EL device that used Alq₃ as the electron transport material was increased up to 10830 cd/m² at 12 V (0.89 lm/W at 300 cd/m²) and with a lower turn‐on voltage (3.2 V at 0.1 cd/m²) than other types of EL devices. Copyright © 2003 John Wiley & Sons, Ltd.