2,8,9-三氧杂-5-氮杂-1-硼杂双环[3,3,3]十一碳烷的合成

本文报导了具有N→B配位键的2,8,9-三氧杂-5-氮杂-1-硼杂双环[3,3,3]十一碳烷的合成及性质。化合物(1)的制备已有报导,而化合物(2),(3)则为新的化合物。我们研究了它们的成环条件,制备的最佳条件及化学稳定性。     

Thermally reversible light scattering films based on the melting/crystallization of organic crystals dispersed in an epoxy matrix

Films that can be reversibly switched from opaque to transparent states by varying temperature (TRLS films), have potential applications in thermal sensors, optical devices, recording media, etc. A dispersion of organic crystals in a thermoset may be used for these purposes provided that at temperatures higher than the melting point there is a matching of refractive indices of both phases. A model system consisting on a dispersion of diphenyl (DP) crystals in an epoxy matrix based on diglycidyl ether of bisphenol A and m-xylylenediamine, was analyzed as a possible TRLS film encapsulated between transparent covers to avoid sublimation of DP. To obtain a uniform dispersion of DP-rich domains in the epoxy matrix by polymerization-induced phase separation, it was necessary to add 5 wt% of polystyrene (PS) to the initial formulation. Phase separation induced by polymerization at 80 °C led to a dispersion of PS/DP domains in the epoxy matrix due to the low compatibility of PS with the epoxy and its high compatibility with DP. Crystallization and melting processes were confined to the interior of dispersed domains leading to an excellent reproducibility of the optical properties of TRLS films in the course of successive heating-cooling cycles.     

Siloxane-Based Nanobuilding Blocks by Reaction Between Silanediol and Trifunctional Silicon Alkoxides

The preparation of nanostructured organic-inorganic materials by assembling of nanobuilding blocks allows controlling the extent of phase interaction, which in its turn governs structure-properties relationships. We present here the synthesis of siloxane-based nanobuilding blocks prepared by reacting diphenylsilanediol with vinyltriethoxysilane and triethoxysilane. The reaction products were obtained by non-hydrolytic condensation between silanediol and ethoxide groups in inert atmosphere, in the presence of pyridine, triethylamine or butyl lithium. Different synthetic conditions were examined by means of ATR-FTIR and NMR spectroscopies, showing the formation of siloxane bonds. In the case of triethoxysilane the reaction carried out in the presence of pyridine leads to Si–H bond preservation in the final product. Air stable products with improved Si–O–Si hydrolytic stability can be obtained by removal of the base after the reaction completion. The condensation products can be described as a mixture of siloxane rings involving difunctional and trifunctional silicon units.     

二磺酸掺杂高热稳定性导电聚苯胺的合成及性能

以有机二磺酸作为掺杂剂合成了具有高热稳定性的二磺酸掺杂导电聚苯胺。研究了反应时间、温度、酸/苯胺摩尔比等因素对产率、产物的导电率与分子量的影响。利用微波加热的方法测试有机二磺酸掺杂聚苯胺的热稳定性能，结果表明：有机二磺酸掺杂的导电聚苯胺在微波场中升温速率快，并且具有良好的反复升温性能。     

SO_4~(2-)/M_xO_y型固体超强酸在有机合成中的应用

SO2 -4 /MxOy(M =Ti,Zr,Fe)是一新型的固体超强酸催化剂 .综述了近年来SO2 -4 /MxOy 型催化剂在有机合成中的应用 ,并对其今后的发展趋势作了预测 .     

基于交叉共轭结构的功能材料

近年来,人们对交叉共轭体系的制备、性能以及理论研究方面产生了极大的兴趣。本文综述了近期国内外在交叉共轭体系研究方面取得的一些最新进展,重点介绍了其在自组装、有机电致发光和离子检测等方面的最新发展动态。最后还对本课题组在交叉型p-n双嵌段寡聚物方面的研究作了详细的介绍,并对一些热点问题作了展望。     

溶剂萃取法制备碳酸盐的热力学讨论

向金属氯化物(Ⅰ)的水溶液中通入CO_2气体,以期制备相应的碳酸盐和酸式碳酸盐,在常温常压下,体系的△G>0,反应几乎是不可能的。向反应体系中加入有机溶剂(S),使生成的HCl即被萃取,可促进Ⅰ的继续转化。分析计算表明,S对HCl必须有很强的萃取能力,其K_萃须在10~5以上。研究了加入有机溶剂N_(235)前后,体系的热力学状态、函数及其变化。加入N_(235)后,K_萃值增大了5个数量级。考察了温度、时间和通气次数对系统热力学性质的影响。根据反应的耦合原理和热力学分析,提出萃取剂选择的原则。结合实验数据的估算说明:溶剂萃取法由Ⅰ和CO_2制备碳酸盐的工艺路线是可行的。     

有机锗化合物中碳氢的快速测定

报道了用Co3O4 作覆盖氧化剂分析有机锗化合物中碳氢元素的方法。通过对 9个样品的十几次分析 ,碳、氢的相对误差分别小于± 1.30 % ,4 .4 0 %。方法简便 ,结果稳定可靠 ,可用于含锗有机化合物的碳氢分析。     

Structure-property modelling of complex formation of strontium with organic ligands in water

The method of substructural molecular fragments based on representation of the molecular graph by ensembles of fragments and involving calculations of those contributions to the given property is applied to the modelling of stability constants of the complexes of strontium(II) with organic ligands in water. Reliability of predictions of developed structure-property models was examined using three different test sets of structurally diverse ligands. The obtained models have been used for generation and screening of combinatorial library of virtual ligands. Some hypothetical efficient Sr(II) binders were suggested.     

The Electrochemical Behavior of Keggin Polyoxometalate Modified by Tricyclic,Aromatic Entity

The inorganic‐organic hybrid polyoxometalates (POMs), (pbpy)₄H[PMo₁₂O₄₀(VO)] ( 1 ) and (pbpy)₄H₄[SiMo₁₂O₄₀] ( 2 ) (pbpy=5‐phenyl‐2‐(4‐pyridinyl)pyridine), have been synthesized and were, respectively, used as a solid bulkmodifier to fabricate a three‐dimensional bulk‐modified carbon paste electrode (CPE) by direct mixing. The electrochemical behavior and electrocatalysis of 1 and 2 modified CPE ( 1 ‐CPE and 2 ‐CPE) have been studied in detail. Both 1 ‐CPE and 2 ‐CPE show remarkable stability that can be ascribed to the doped organic conjugated pbpy, which is very important for practical applications in electrode modification.