光催化剂沸石/Fe_2O_3/TiO_2的制备、表征及性能

以天然沸石为载体,以钛酸丁酯、硝酸铁为主要原料,用溶胶-凝胶法成功制备负载型Fe_2O_3/TiO_2光催化剂;采用XRD、SEM、EDS及XPS对样品进行结构表征及化学组成分析.结果表明:400℃焙烧所制得光催化剂中TiO_2主要以锐钛矿形式存在,掺杂铁元素主要以价键形式分布在沸石中,负载Fe_2O_3/TiO_2的沸石主要呈球形和类球形.降解实验表明:光催化剂对甲基橙具有良好的降解性能,且易回收再利用.     

Removal of Anionic Dyes from Aqueous Solution with Layered Cationic Aluminum Oxyhydroxide

It is highly desired yet challenged to find an adsorbent with low cost and excellent performance in the removal of organic dyes from aqueous solution. Here we reported that a layered cationic aluminum oxyhydroxide material hydrothermally synthesized from the low-cost source materials of AlCl₃∙6H₂O, CaO and H₂O, known as JU-111, can meet such criterion in removing methyl orange(MO) and Congo red(CR). JU-111 shows fast adsorption kinetics[especially for CR(15 s)] and high adsorption capacity(MO:>1000 mg/g; CR:>2900 mg/g), surpassing most of the reported adsorbents. Comprehensive characterizations of the adsorption process of MO and CR revealed that both adsorptions were achieved via the anion exchange process. The characteristics of extremely low cost and excellent performance render JU-111 great potential in the practical applications in the removal of anionic dyes.     

Optimization of Vacuum-Microwave-Assisted Extraction of Natural Polyphenols and Flavonoids from Raw Solid Waste of the Orange Juice Producing Industry at Industrial Scale

Orange pomace (OP) is a solid waste produced in bulk as a byproduct of the orange juice industry and accounts for approximately 50% of the quantity of the fruits processed into juice. In numerous literature references there is information about diverse uses of orange pomace for the production of high-added-value products including production of natural antioxidant and antimicrobial extracts rich in polyphenols and flavonoids which can substitute the hazardous chemical antioxidants/antimicrobials used in agro-food and cosmetics sectors. In this work and for the first time, according to our knowledge, the eco-friendly aqueous vacuum microwave assisted extraction of orange pomace was investigated and optimized at real industrial scale in order to produce aqueous antioxidant/antimicrobial extracts. A Response Surface Optimization methodology with a multipoint historical data experimental design was employed to obtain the optimal values of the process parameters in order to achieve the maximum rates of extraction of OP total polyphenols and/or total flavonoids for economically optimum production at industrial scale. The three factors used for the optimization were: (a) microwave power (b) water to raw pomace ratio and (c) extraction time. Moreover, the effectiveness and statistical soundness of the derived cubic polynomial predictive models were verified by ANOVA.     

BiOI/Bi_2WO_6对甲基橙和苯酚的光催化降解及光催化机理(英文)

采用简单的沉积方法制备了不同碘化氧铋含量的BiOI/Bi2WO6光催化剂,通过X射线衍射(XRD)、扫描电子显微镜(SEM)、高分辨透射电子显微镜(HR-TEM)、紫外-可见漫反射光谱(UV-Vis DRS)和BET比表面积测量对其进行了表征。在紫外和可见光的照射下,使用甲基橙和苯酚的光催化降解评价了BiOI/Bi2WO6催化剂的光催化性能。结果表明:与商业P25和纯Bi2WO6相比,13.2%BiOI/Bi2WO6光催化剂具有更高的紫外和可见光催化性能。这明显增加的光催化活性主要归功于光生电子和空穴在Bi2WO6和BiOI界面上的有效转移,降低了电子-空穴对的复合。基于BiOI和Bi2WO6的能带结构,提出了光生载流子的一种转移过程。自由基清除剂的实验表明,·OH,h+,·O2-和H2O2,特别是h+,共同支配了甲基橙和苯酚的光催化降解过程。     

可见光驱动Ag3PO4催化降解罗丹明B和甲基橙

采用简易离子交换法制备可见光驱动Ag3PO4光催化剂.通过X射线衍射、场发射扫描电子显微镜、N2吸附-脱附、紫外-可见漫反射光谱及傅里叶变换红外光谱对所制备的Ag3PO4催化剂进行表征.结果表明,在可见光照射下,Ag3PO4催化剂对罗丹明B降解表现出优越的光催化活性,但对甲基橙的降解活性低,这归因于Ag3PO4催化剂对甲基橙分子吸附量低.可见光照Ag3PO4反应体系中,空穴和超氧自由基共同发挥作用导致罗丹明B和甲基橙光催化降解.在罗丹明B的协助作用下,Ag3PO4催化剂对甲基橙的可见光催化降解活性大大增强,这是由于罗丹明B的存在可产生更多的超氧自由基,从而使甲基橙进一步降解.     

BiPO4/石墨烯光电极的制备及其光电催化性能（英文）

光电催化(PEC)氧化法是一种使用半导体电极材料在光和电的共同作用下处理水中有机污染的有效方法.在PEC工艺中,施加偏压不仅可以利用电催化对有机污染物进行降解,而且在偏压作用下,光生电子-空穴对能够得到有效的分离和传输,从而大大提高了机物污染物的去除速率.尽管PEC技术已经取得了许多重要的突破,但是能量转换效率仍然无法满足实际应用.因此,开发具有优异性能,良好稳定性和低成本的光电极材料是一项具有挑战性的研究工作.本文采用两步电沉积法制备了BiPO4纳米棒/还原氧化石墨烯/FTO复合光电极(BiPO4/r GO/FTO).电镜结果表明,电沉积制得的纳米棒状磷酸铋均匀负载在石墨烯纳米片层表面.采用甲基橙为模型体系,考察了复合光电极的光电催化活性.BiPO4/r GO/FTO复合电极的光电催化降解速率是BiPO4/FTO光电极的2.8倍,显示出优良的光电催化活性.实验进一步研究了工作电压和BiPO4沉积时间对甲基橙光电降解性能的影响.最佳的BiPO4沉积时间为45 min,最佳工作电压为1.2 V.捕获实验和ESR实验表明羟基自由基(·OH)和超氧化物自由基(·O2-)是该电极的主要活性物种.BiPO4/r GO/FTO复合电极经过四次循环实验后其降解甲基橙效率保持不变,显示出高稳定性,采用光电流,交流阻抗及其荧光测试对其光催化机理进行推测.结果表明该复合光电极具有高PEC活性的主要原因是:石墨烯的引入加快了BiPO4的电子空穴的分离,拓宽了石墨烯的可见光吸收范围;同时,石墨烯诱导产生的BiPO4混合相也进一步促进了光生电子空穴的分离,提高了光电降解活性.     

微波消解-催化动力学光度法测定茶叶中微量锰

利用微波消解法前处理样品,同时研究了在pH值为9.2的Na2B4O7-NaOH缓冲溶液介质中阳离子表面活性剂溴化十六烷基吡啶对Mn(Ⅱ)催化H2O2氧化二甲酚橙的褪色反应具有明显的增敏作用,建立了催化动力学光度法测定痕量Mn(Ⅱ)的新方法.该方法的线性范围为0.04~0.40μg/mL,检出限为0.009 6μg/mL.用于茶叶中微量锰(Ⅱ)的测定,回收率为98.3%~102.3%,结果令人满意.     

膨润土负载纳米铁去除水中甲基橙的研究

采用了液相还原法制备膨润土负载纳米铁,分别考察了膨润土、纳米铁和负载纳米铁对1L、100mg/L的甲基橙溶液的去除率,并探讨了时间、pH值、投加量、温度等对负载纳米铁去除水中甲基橙的影响.结果表明:在投加量为1.00g/L、60r/min、30℃、pH为6.00的条件下,负载纳米铁去除水中甲基橙在前20 min时效果最...     

以橘子皮为碳源合成的CeO2@C及其对酸性染料去除性能

以Ce(NO₃)₃·6H₂O、橘子皮为原料,利用共沉积法制备氧化铈水合物与橘子皮混合物(CeO₂·x H₂O@OPP),通过在N₂中煅烧CeO₂·x H₂O@OPP获得CeO₂@C复合材料。利用FT-IR、X射线衍射、扫描电镜、拉曼光谱、UV-Vis、X射线光电子能谱、光电流测试方法对合成材料进行了表征。结果表明,CeO₂@C保留了较多的有机官能团,材料内具有较丰富的氧空穴及碳键,Ce、C、O元素均匀分布于材料内。光催化实验结果表明,在CeO₂中引入碳有利于光生电子与空穴分离,提高光电流强度及光催化效率,且CeO₂@C中碳含量对有机染料吸附及光催化效率影响较大。