Seawater—A test of multicomponent electrolyte solution theories. I. The apparent equivalent volume,expansibility, and compressibility of artificial seawater

The apparent equivalent volume _V, expansibility _E, and compressibility _K of an artificial seawater solution containing10 ionic components (Na⁺, Mg²⁺, Ca²⁺, K⁺, Sr²⁺, Cl^–, SO ₄ ^2– , HCO ₃ ^– , Br^–, and F^–) and one nonionic component (H₃BO₃) has been determined from0 to40°C (in5° intervals) and from0.1 to0.8 m ionic strength at1 atm. The concentration dependence (I_v=volume ionic strength) of the _V's, _E's, and _K's have been examined by using a Masson-type equation, = ^° +S'I _V ^1/2, and a Redlich-type equation, = ^° +SI _V ^1/2 +BI _V, where ^° is the infinite-dilution value, S is the empirical Masson slope, S is the theoretical Debye-Hückel slope, and B is an empirical deviation constant. By using Young's rule, = E_i(i), the apparent equivalent volumes, expansibilities, and compressibilities for sea salt have been estimated from the ionic and nonionic components making up the mixture. The estimated apparent molal quantities agree very well with the directly measured values providing the concentration terms, S _i and B_i, are weighted according to the methods of Wood and Reilly.Contribution Number 1599 from the University of Miami.     

煤浆浓度和颗粒分布对煤浆黏度预测的影响

采用神华煤制备煤浆,分析了颗粒粒径比λ和小颗粒体积分数ξ对双峰分布浆体黏度的影响,根据浆体黏度的关联式预测了煤浆的黏度并且与实验结果进行了比较。结果表明,采用双峰分布的颗粒制浆可以有效地降低浆体的黏度,同时可以获得较大的浆体体积分数 。在相同体积分数下,随着颗粒粒径比λ的增加,浆体的黏度迅速下降。当小颗粒体积分数ξ_dp1为35%时,浆体的黏度最小。采用Ouchiyama模型计算浆体的最大体积分数Φ_m与实验值较为吻合,而浆体的本质黏度[μ]基本保持不变。考虑λ和小颗粒体积分数ξ对双峰分布浆体的最大体积分数Φ_m的影响,可以采用单峰分布浆体的黏度关联式预测双峰分布浆体的黏度。     

电流变液的固态结构

电流变体系在外场作用下形成一定的固态结构,而其性能与所形成的结构密切相关.不考虑体系非静电力时,体系自由能为静电能的负值,而静电能与有效介电常数成正比.基于Maxwell-Wagner模型,推导出有效介电常数关于颗粒体积比的一系列正幂项解析表达式,计算球颗粒悬浮于介质或导电液体中构成的3种立方结构的有效介电常数.计算结果表明:电流变体系中球颗粒为介质球或是导体球构成3种立方结构中FCC结构具有最低的自由能.电流变液在由液相向固相转变的过程中,形成的固态结构为FCC结构.     

ETFE双层气枕计算分析及比较

基于U.L.格式的非线性有限单元法,编制了ETFE双层气枕找形分析、受荷分析的计算程序,并选取圆形、正六边形、正三角形、菱形及正方形5种工程中常用的气枕作为计算模型进行对比分析.在找形分析时,将矢高、内压和初始张力作为控制参数进行计算并依次给出了三者之间的相互关系.在受荷分析时,考虑6种给定的荷载工况,计算了ETFE气枕体积、内压的变动以及膜面的主应力.数值计算结果表明,形状与圆形相差较大的双层气枕其力学性能变化明显.在气枕的体积和内压变化不大时,可直接根据气枕上层膜面的主应力判定气枕的工作状态.     

汇文系统下的合订本期刊价格管理

介绍了在汇文系统环境下,如何对合订本期刊价格进行管理的几种方法。     

Proof of gridlock in a polymer model

It has been suggested that some lattice models of polymers, especially ones that incorporate more realistic excluded volume interactions extending to further neighbors, may be subject to gridlock. A model is defined to have the property of gridlock if it cannot melt at any temperature unless a density decrease is allowed. Classical theories of polymer melting are incompatible with the property of gridlock. This paper proves rigorously that a two-dimensional square-lattice model of polymer chains that have nearest-neighbor excluded volume interactions (called the X1S model) has the gridlock property. The proof uses elementary concepts from graph theory. Also, different interpretations of the X1S model are given in terms of real polymers. This leads to a discussion of a number of different classes of melting depending upon whether the intramolecular rotameric energies and the attractive intermolecular energies are antagonistic to or supportive of the melting transition.     

Thermal analysis and water-cooling design of the CSNS MEBT 324 MHz buncher cavity

At least two bunchers are needed in the 3 MeV H- Medium Energy Beam Transport(MEBT)line located between RFQ and DTL for the CSNS(China Spallation Neutron Source).A nose-cone geometry has been adopted as the type of buncher cavity for its simplicity,higher impedance and lower risk of multipacting.By making use of the results got from the simulations on the buncher with two-dimension code SUPERFISH,the thermal and structural analyses have been carried out,the process and results to determine the resulting frequency shift due to thermal and structural distortion of the cavity are presented,the water-cooling channel position and the optimum cooling water temperature as well as the tuning method by adjusting the cooling water temperature when the cavity is out of resonance are also determined through the analyses.     

摄动有限体积法重构近似高精度的意义

研讨有限体积(FV)方法重构近似高精度的作用问题.FV方法中积分近似采用中点规则为二阶精度时,重构近似高精度(精度高于二阶)的意义和作用是一个有争议的问题.利用数值摄动技术[1,2]构造了标量输运方程的积分近似为二阶精度、重构近似为任意阶精度的迎风型和中心型摄动有限体积(PFV)格式.迎风PFV格式无条件满足对流有界准则(CBC),中心型PFV格式为正型格式,两者均不会产生数值振荡解.利用PFV格式求解模型方程的数值结果表明:与一阶迎风和二阶中心格式相比,PFV格式精度高、对解的间断分辨率高、稳定性好、雷诺数的适用范围大,数值地"证实"重构近似高精度和PFV格式的实际意义和好处.     

Strategies to cure numerical shock instability in the HLLEM Riemann solver

The HLLEM scheme is a popular contact and shear preserving approximate Riemann solver that is known to be plagued by various forms of numerical shock instability. In this paper, we clarify that the shock instability exhibited by this scheme is primarily triggered by the spurious activation of the antidiffusive terms present in the first and third Riemann flux components on the transverse interfaces adjoining the shock front due to numerical perturbations. These erroneously activated terms are shown to counteract the favorable damping mechanism provided by its inherent HLL-type diffusive terms, causing an unphysical variation of the conserved quantity ρu both along and across the numerical shock. To prevent this, two distinct strategies are proposed termed as S elective W ave M odification and A nti D iffusion C ontrol. The former focuses on enhancing the quantity of the favorable HLL-type dissipation available on these critical flux components by carefully increasing the magnitudes of certain nonlinear wave speed estimates, while the latter focuses on directly controlling the magnitude of these critical antidiffusive terms. A linear perturbation analysis is performed to gauge the effectiveness of these cures and to estimate a von Neumann–type stability bounds on the CFL number associated with their use. Results from a variety of classic shock instability test cases show that the proposed strategies are able to provide excellent shock stable solutions even on grids that are highly elongated across the shock front without compromising the accuracy on inviscid contact or shear dominated viscous flows.     

Nonlinear corrector for Reynolds-averaged Navier-Stokes equations

The scope of this paper is to present a nonlinear error estimation and correction for Navier-Stokes and Reynolds-averaged Navier-Stokes equations. This nonlinear corrector enables better solution or functional output predictions at fixed mesh complexity and can be considered in a mesh adaptation process. After solving the problem at hand, a corrected solution is obtained by solving again the problem with an added source term. This source term is deduced from the evaluation of the residual of the numerical solution interpolated on the h/2 mesh. To avoid the generation of the h/2 mesh (which is prohibitive for realistic applications), the residual at each vertex is computed by local refinement only in the neighborhood of the considered vertex. One of the main feature of this approach is that it automatically takes into account all the properties of the considered numerical method. The numerical examples point out that it successfully improves solution predictions and yields a sharp estimate of the numerical error. Moreover, we demonstrate the superiority of the nonlinear corrector with respect to linear corrector that can be found in the literature.