Volume and heat capacity of model non-aqueous self-assembly systems

Blends of immiscible polymers are often stabilized by block copolymers which can form non-aqueous micelles and microemulsions in the liquid polymers. The phase diagrans, apparent volumes and apparent heat capacities of model non-aqueous binary and ternary systems were studied in order to investigate the conditions under which such self-assembly systems could form. 1,2-Hexanediol, which can cosolubilize hexane and ethyleneglycol, forms inverse micelles in hexane and weak microaggregates in ethyleneglycol. Genapol X-060, a commercial alcoholic surfactant containing on the average an aliphatic chain of 13 carbons and 6 oxyethylenes (C₁₃E₆), forms microaggregates in poly(ethyleneglycol) 400. These self-assembly systems are strengthen in the presence of a third component which has an affinity for the inner phase.Presented at the Symposium, 76^th CSC Congress, Sherbrooke, Quebec, May 30–June 3, 1993, honoring Professor Donald Patterson on the occasion of his 65^th birthday.     

A simple flow injection-reduced volume column system for hemoglobin typing

A flow injection (FI)-reduced volume column system was developed for hemoglobin (Hb) typing to be used as an initial screening method for thalassemia. The column was packed with 140 μl diethylaminoethyl (DEAE)-Sephadex A-50 ion exchange beads. Hb can be separated using Tris–HCl buffer solution with pH gradient 8.5–6.5 and then monitored spectrophotometrically at 415 nm. The hemolysate of 40 blood samples from packed red cells were screened for thalassemia by determining the amount of HbA₂ and HbE present. The proposed system was able to predict positive test results from those samples with β, E-trait and EE homozygous thalassemia, Hb types that were independently identified following the conventional method at the hospital laboratory. Advantages of the proposed system over the conventional column technique include low amount of reagents and blood sample needed, short analysis time and low cost. Each analysis required only 80 μl of 50 times diluted packed cells, which is equivalent to 1.6 μl undiluted packed cells, and it can be completed in only 35 min. This simple FI-reduced volume column system was demonstrated to be an economic alternative system for Hb typing to initially screen some types of thalassemia such as β-trait, E-trait and EE-homozygous which are commonly found in Thailand.     

Calculation of the van der Waals volumes of organic molecules

A new and more precise method is proposed for calculating van der Waals atomic and molecular volumes of organic compounds. The method provides for intersections of three or more spheres at one point of space. Such a possibility is essential for calculating the volumes of sterically overcrowded molecules and of molecules with intramolecular hydrogen bonds. A computer program for IBM PC/AT(XT) is developed. Depending on the atomic environment in the molecule, the average values of the volume increments for atoms C, N, O, H, F, Cl, and S are obtained using the data from the Cambridge Structural Database.N. S. Kurnakov Institute of General and Inorganic Chemistry, Russian Academy of Sciences, Moscow 117071. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 4, pp. 922–931, April, 1992.     

不同温度下氨基酸在α-咖啡碱水溶液中的体积、粘度及折光率特性

Measurements of density(ρ), viscosity(η), and refractive index(n), were carried out on α-amino acids, DL-solution at 298.15, 303.15, 308.15, and 313.15 K. These measurements have been carried out to evaluate some important parameters, viz., apparent molar volume (φv), partial molar volume (φv0), transfer volume (φ0v (tr)), viscosity A and B coefficients of Jones-Dole equation, free energies of activation per mole of solvent (△μ0#1) and solute (△μ0#2),enthalpies (△H*) and entropies (△S*) of activation of viscous flow, variation of B with temperature ((a)B/(a)T)P, and molar refractive index (RD). These parameters have been interpreted in terms of solute-solute and solute-solvent interactions and structure making/breaking ability of solutes in the given solution.     

A calorimetric study of the glass transition kinetics in polyisoprene

The connection between the dielectric and calorimetric relaxation behaviours of synthetic polyisoprene Cariflex IR 305 is studied. A similar comparison of dielectric and dilatometric results was described in [1]. The heat capacity was measured during heating of samples prepared with different thermal history. Experimental results were compared with the heat capacity curves calculated for a model based on the multiparameter theory of Kovacs et al. [4]. The model considers the relaxation system as being composed of a set of subsystems characterized by different relaxation times. The distribution of relaxation times and their temperature dependence were taken from the diclectric measurement. The relaxation time of a subsystem from posed to depend, not only on the actual, temperature of the sample, but also on the deviation of this subsystem from equilibrium, or alternatively, on the deviation of the system as a whole. The comparison between the measured and modeled curves shows that both influences must be taken into account in order to explain the experimental results.Dedicated to Prof. Dr. W. Pechhold on the occasion of his 60th birthday.     

Volumetric Properties of Ternary-Pseudobinary Mixtures Containing Benzene and Cyclohexane

Densities have been measured as a function of composition for ternary-pseudobinary mixtures of [(benzene + toluene or methylcyclohexane) + (cyclohexane + toluene or methylcyclohexane)] by means of a vibrating-tube densimeter at atmospheric pressure and the temperature 298.15 K. The excess molar volumes, V_m^E, were calculated from the densities and correlated using the Redlich–Kister equation to estimate the coefficients and standard errors. The experimental and calculated quantities are used to discuss the mixing behavior of the components. The results show the third component, toluene and methylcyclohexane, influences the interaction between benzene and cyclohexane.     

Diels-Alder reaction volumes in the solid state and solution

The densities of anthracene, tetracyanoethylene, maleic anhydride, N-phenylmaleineimide, trans, trans-1,4-diphenylbuta-1,3-diene, and their Diels-Alder adducts were measured in the solid state and in solution at 25 °C. The reaction volumes in the solid state were calculated from the difference in molar volumes. They turned out to be low, close to each other (–4 to –11 cm³ mol^–1), and slightly different from the reaction volumes (–8±1 cm³ mol^–1) calculated from the van der Waals radii. The reaction volumes in solutions (–15 to –32 cm³ mol^–1) were found from the difference in partial molar volumes of the reactants in dioxane, acetonitrile, and 1,2-dichloroethane, The experimental Diels-Alder reaction volumes in solution are determined not only by the formation of new bonds in an adduct: a considerably higher contribution (to 75%) is made by a change in the volume of intermolecular empty spaces in solution on going from reactants to adducts.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2386–2390, November, 2004.     

Catalytic activity of silica in ozone formation in electrical discharges

The catalytic action of granular silica packing on ozone formation has been observed under discharge conditions. Using a glass ozonizer with a metal high-voltage electrode, at a frequency of 400 Hz it was possible to obtain much higher ozone concentrations in the presence q( silica than without packing, with the same total energy consumption. The dependence between ozone production and energy efficiency is considered, and conditions of the optimum ozonizer run are discussed. It is shown that in the all-glass ozonizer with a narrow discharge gap, the ozone concentration may be as high as 6.5% (ca. 130g O₃/m³) when silica packing is applied.     

尺寸排除色谱扩展因子的保留体积依赖性

尺寸排除色谱扩展函数的方差即尺寸排除色谱柱中单分散高分子峰的扩展因子,以窄分布聚苯乙烯标样用分子量分离和扩展效应同时标准的方法作了测量。简单的理论分析导出了一个方程以表示扩展因子的保留体积依赖性,其中包括四个具有明确物理意义并可实验测量的参数。该方程与实验数据符合得相当好,并解释了扩展因子极值出现的条件。     

Volumetric Properties of Aqueous 2-Chloroethanol Solutions and Volumes of Transfer of Some Amino Acids and Peptides from Water to Aqueous 2-Chloroethanol Solutions

Densities and apparent molar volumes of aqueous 2-chloroethanol were determined at temperatures from 15.0 to 34.4°C using digital densimetry. The results of the volumetric measurements have been used to calculate the following thermodynamic quantites at 25°C: V ₂ ^o = 55.05 ± 0.02 cm³-mol^–1, (V ₂ ^o/T)_p = 0.01486 ± 0.00318 cm³-K^–1-mol^–1, and (² V ₂ ^o/T ²)_p = 0.02972 ± 0.00318 cm³-K^–2-mol^–1. Partial molar volumes of transfer from water to 1 mol-dm^–3 2-chloroethanol have also been determined for L-glycine, L-alanine, L-serine, L-glutamic acid, and L-aspartic acid at 35.0°C. The transfer results have been explained in terms of the nature of the interactions of the groups in the solute and solvent. Hydration numbers of L-glycine and L-alanine have also been calculated in aqueous 2-chloroethanol.