Survivable network design under optimal and heuristic interdiction scenarios

We examine the problem of building or fortifying a network to defend against enemy attacks in various scenarios. In particular, we examine the case in which an enemy can destroy any portion of any arc that a designer constructs on the network, subject to some interdiction budget. This problem takes the form of a three-level, two-player game, in which the designer acts first to construct a network and transmit an initial set of flows through the network. The enemy acts next to destroy a set of constructed arcs in the designer’s network, and the designer acts last to transmit a final set of flows in the network. Most studies of this nature assume that the enemy will act optimally; however, in real-world scenarios one cannot necessarily assume rationality on the part of the enemy. Hence, we prescribe optimal network design algorithms for three different profiles of enemy action: an enemy destroying arcs based on capacities, based on initial flows, or acting optimally to minimize our maximum profits obtained from transmitting flows.     

英语试卷自动命题系统(ATMS)

本文简述了利用微机M_(24)(IBM—PC/XT兼容机)进行英语辅助教学,建立英语试卷自动命题系统(ATMS即Automatic Test—Making System的简称。);说明了ATMS的基本构成原理,给出了主要框图。     

Self-Orthogonal 3-(56,12,65) Designs and Extremal Doubly-Even Self-Dual Codes of Length 56

In this paper, we show that the code generated by the rows of a block-point incidence matrix of a self-orthogonal 3-(56,12,65) design is a doubly-even self-dual code of length 56. As a consequence, it is shown that an extremal doubly-even self-dual code of length 56 is generated by the codewords of minimum weight. We also demonstrate that there are more than one thousand inequivalent extremal doubly-even self-dual [56,28,12] codes. This result shows that there are more than one thousand non-isomorphic self-orthogonal 3-(56,12,65) designs. AMS Classification: 94B05, 05B05     

短波通滤光片膜系设计

详细介绍用等效折射率概念设计短波通滤光片的原理和计算方法。根据原理和方法，选择二氧化钛（TiO2）作为高折射率材料、二氧化硅（SiO2）作为低折射率材料。首先从理论上计算出用这2种材料设计的波长λ=950～1150nm的短波通滤光片所需要的周期数，然后给出短波通滤光片的主膜系和光谱曲线。由于据此周期数设计出的膜系光谱曲线在750～810nm处的透过率不符合要求，因此对该膜系进行了改进。依照改进的设计进行多次制备，最终制备出了符合要求的短波通滤光片，找到了最佳制备工艺和方法。最后，对制备出来的短波通滤光片薄膜进行了各种环境实验。实验结果表明，膜层的各项指标符合设计要求。     

Parking Capacity and Pricing in Park'n Ride Trips: A Continuous Equilibrium Network Design Problem

In this paper we consider the problem of designing parking facilities for park'n ride trips. We present a new continuous equilibrium network design problem to decide the capacity and fare of these parking lots at a tactical level. We assume that the parking facilities have already been located and other topological decisions have already been taken.The modeling approach proposed is mathematical programming with equilibrium constraints. In the outer optimization problem, a central Authority evaluates the performance of the transport network for each network design decision. In the inner problem a multimodal traffic assignment with combined modes, formulated as a variational inequality problem, generates the share demand for modes of transportation, and for parking facilities as a function of the design variables of the parking lots. The objective is to make optimal parking investment and pricing decisions in order to minimize the total travel cost in a subnetwork of the multimodal transportation system.We present a new development in model formulation based on the use of generalized parking link cost as a design variable.The bilevel model is solved by a simulated annealing algorithm applied to the continuous and non-negative design decision variables. Numerical tests are reported in order to illustrate the use of the model, and the ability of the approach to solve applications of moderate size.     

红外耦合光学系统设计

红外目标模拟器由红外目标图像发生器和投影光学系统组成。该红外光学系统是一个要求与2个导引光学系统的光学技术参数相匹配的长焦距、大视场和具有像方远心光路的中红外光学系统。叙述用于红外目标模拟器的红外耦合光学系统的设计原理，提出它与导引光学系统一起可组成放大倍率M=4.5×的红外投影光学系统，并指出IR CRT产生的图像通过红外投影光学系统可成像在导引接收器上。针对给出的红外耦合光学系统的设计特点和技术要求，光学材料选取硅（Si） 锗（Ge） 硅（Si），采用简单的柯克三片式结构完成光学系统设计。设计评价结果表明，该系统的光学性能和成像质量均满足设计指标要求。     

低电阻测量设计实验中电位差计指针不稳的解决方法

本文分析了J33Q型电位差计在实验中指针不稳的原因,并提出了解决的办法。     

TLC549 A/D转换电路在EDA实验系统上的实现

介绍了TLC5 4 9带串行控制的 8位、4 0MHz单通道模数转换器的设计方法。常用的A D转换器件多数是并行输出 ,应用电路成熟 ,而带串行控制的转换器的设计方法少见。本文提出的串行控制单通道模数转换器设计方法在EDA实验系统上得到了验证 ,对相关电路设计具有一定参考价值     

超大规模集成电路光学光刻技术的现状与展望

光学光刻是目前超大规模集成电路(VLSI)制备中主要的微米和亚微米的图形加工技术,这一技术将继续保持其主导地位成为90年代VLSI发展的关键。本文综述了近年来光学光刻工艺的发展,主要介绍了G线(436nm)、Ⅰ线(365nm)和准分子激光光刻的现状,并对实现高的光学光刻分辨率所必须解决的透镜设计、套准精度和像场面积等问题作了详细描述。最后展望了发展方向、     

约束数据库中的函数依赖公理系统与设计理论

约束数据模型作为一种新的数据模型正受到广泛关注。为了约束数据库的应用，需要研究它的设计。为此本文对约束数据库中的函数依赖给出定义，并提出函数依赖的公理系统，证明了它的有效性和完备性；在此基础上完成了约束数据库设计的核心工作：把约束关系模式分解为3NF或BCNF的算法。