铟镓共掺杂对n-ZnO纳米棒/p-GaN异质结生长行为和光电性能的影响

利用低温水热法在p-GaN薄膜上生长了铟(In)和镓(Ga)共掺杂的ZnO纳米棒。X射线衍射(XRD)、X射线光电子能谱(XPS)和X射线能量色谱仪(EDS)结果表明,In和Ga已固溶到ZnO晶格中。扫描电子显微镜(SEM)结果表明, ZnO纳米棒具有良好的c轴取向性,随着In和Ga共掺杂浓度的增加,纳米棒的直径减小,密度增加。XRD结果表明,In和Ga共掺杂引起ZnO晶格常数增大,导致(002)衍射峰向低角度方向偏移。同时,ZnO的光学性质受到In和Ga共掺杂的影响。与纯ZnO相比, 共掺杂ZnO纳米棒的紫外发射峰都出现轻微红移,这是表面共振和带隙重整效应综合作用的结果。I-V特性曲线表明,随着In和Ga共掺杂浓度的增加,n-ZnO纳米棒/p-GaN异质结具有更好的导电性。     

基于锑化物二类超晶格的多色红外探测器研究进展

近年来InAs/GaSb二类超晶格红外探测器在材料晶体结构生长、器件结构设计与成像应用方面取得了飞速发展。尤其在多色红外探测方面,二类超晶格材料以其具备的带隙可调、暗电流小、量子效率高、材料均匀性高,以及成本低等优越性能,使其逐步成为第三代红外焦平面探测器的优选材料。本文阐述了锑化物窄带隙半导体研究中心的锑化物多色红外探测器研究进展。本团队成功实现了低噪声、高量子效率以及低光学串扰的短/中、短/长、中/长、长/长、中/长/甚长波等多种高性能多色红外探测器研制。     

毛细管电泳法测定左旋多巴药片的光学纯度

建立了一种毛细管电泳测定左旋多巴药片光学纯度的新方法。D,L-多巴(D,L-dopa)用2,4-二硝基氯苯(CDNB)衍生,以β-环糊精(-βCD)为手性选择剂,在硼砂(pH 9.0)缓冲溶液中进行毛细管电泳手性分离。采用紫外检测,测定波长为220 nm。在测定条件下,对映体分离在9 m in内完成。L-dopa中D-dopa的含量在0.10%~2.0%范围内,与D-dopa的峰面积呈现良好的线性关系。在L-dopa中加入不同量的D-dopa,测得回收率在96%~102%之间,每个样品分别测定3次,其相对标准偏差(RSD)小于2.3%。方法用于市售左旋多巴药片的分析,测得左旋多巴药片中D-dopa的含量为0.20%。     

空分复用光纤放大器增益均衡技术研究进展

随着第五代移动通信技术的正式商用,全球网络流量的需求呈爆炸式增长,传统单芯单模光纤通信系统的容量已接近香农极限,实现通信系统的升级扩容迫在眉睫.空分复用光纤通信系统基于空间维度复用,可有效解决未来通信系统的扩容难题,而空分复用光纤放大器是不可或缺的核心器件和研究焦点之一.当多信道功率增益不均衡时,功率差将会随传输距离的...     

用偏光织构及透射光谱分析液晶器件的老化

对一组台式计算器液晶显示器进行了光辐照,研究了光辐照对液晶显示器件显示品质的影响。采用偏光显微镜观察到了辐照后液晶的偏光织构的变化,液晶中出现了平行的条纹状织构和失去消光作用的黑洞,随着接受光辐照时间的增加,黑洞数量越来越多,面积越来越大。通过由计算机控制的双光束紫外-可见分光光度计测试了透射光谱的变化,发现其透射率随着接受光辐照时间的增加而降低。分析结果表明,条纹状织构和黑洞的出现是由于液晶分子结构在紫外线的照射下发生了变化所致,失去消光作用的黑洞是导致液晶器件透射率持续下降的主要原因。     

CONTINUUM TOPOLOGY OPTIMIZATION FOR MONOLITHIC COMPLIANT MECHANISMS OF MICRO-ACTUATORS

A multi-objective scheme for structural topology optimization of distributed compliant mechanisms of micro-actuators in MEMS condition is presented in this work, in which mechanical flexibility and structural stiffness are both considered as objective functions. The compliant micro-mechanism developed in this way can not only provide sufficient output work but also have sufficient rigidity to resist reaction forces and maintain its shape when holding the work-piece. A density filtering approach is also proposed to eliminate numerical instabilities such as checkerboards, mesh-dependency and one-node connected hinges occurring in resulting mechanisms. SIMP is used as the interpolation scheme to indicate the dependence of material modulus on element-regularized densities. The sequential convex programming method, such as the method of moving asymptotes (MMA), is used to solve the optimization problem. The validation of the presented methodologies is demonstrated by a typical numerical example.     

Mn2+、N2-共掺杂Zn2GeO4晶体电子结构和光学性质的研究

采用基于密度泛函理论的平面波超软赝势方法对本征Zn2GeO4,Mn2+掺杂Zn2GeO4,Mn2+/N2-共掺杂Zn2GeO4超晶胞进行了几何结构优化,计算了掺杂前后体系的晶格常数、能带结构、态密度和光学性质。结果表明,Mn离子掺入后,Mn离子3d轨道与O离子2p轨道之间有强烈的轨道杂化效应,掺杂系统不稳定,而Mn/N离子共掺后,Mn离子和N离子之间的吸引作用克服了Mn离子之间的排斥作用,能够明显地提高掺杂浓度和体系的稳定性。光学性质计算结果表明,Mn离子与N离子共掺杂能改善Zn2GeO4电子在低能区的光学跃迁特性,增强电子在可见光区的光学跃迁;吸收谱计算结果显示,Mn离子与N离子掺入后体系对低频电磁波吸收增加。     

ZnS Nanospheres for Optical Modulator in an Erbium-Doped Fiber Laser

Zinc sulfide (ZnS), which belongs to transition metal monochalcogenides, is a semiconductor material with wide direct band gap. It can potentially show some special applications (such as luminescence, phosphor, sensors, infrared window materials, photocatalysis) by changing the morphology, size, and crystal structure of semiconductor materials. However, ZnS nanospheres have not been studied as optical modulators until now. Herein, ZnS nanospheres are synthesized by the hydrothermal method and are used to realize optical modulators in an Er-doped fiber laser. The evanescent field effect is utilized to incorporate the ZnS nanospheres on a tapered fiber. Furthermore, with the increase in pump power, the modulation interval gradually decreases to a minimum of 34.36 ns corresponding to the modulation frequency of 29.1 MHz, which is the highest modulation frequency to our knowledge in a ring cavity all-fiber laser. These results demonstrate ZnS nanospheres together with the interaction of dispersion and nonlinearity in optical fibers can modulate the proposed lasers. This not only provides a new method for controlling the power and frequency of all optical modulators, but also marks an important step for ZnS materials in optics research and device applications.     

Optical Trapping with Focused Surface Waves

Near-field optical trapping can be realized with focused evanescent waves that are excited at the water–glass interface due to the total internal reflection, or with focused plasmonic waves excited on the water–gold interface. Herein, the performance of these two kinds of near-field optical trapping techniques is compared using the same optical microscope configuration. Experimental results show that only a single-micron polystyrene bead can be trapped by the focused evanescent waves, whereas many beads are simultaneously attracted to the center of the excited region by focused plasmonic waves. This difference in trapping behavior is analyzed from the electric field intensity distributions of these two kinds of focused surface waves and the difference in trapping behavior is attributed to photothermal effects due to the light absorption by the gold film.