同步测功机扩大容量和应用范围的探讨

本文导出了在发电和电动工况下的转矩—转速曲线,论述了电动运行下的起动方法,并尝试采用Ｙ－Δ混合绕组以改善发电运行下的电势波形．结构简单,制造方便是这种电机的特点     

RECENT PROGRESS OF NANO-MECHANICAL MAPPING

 Nano-mechanical mapping by atomic force microscopy has been developed as an useful application to measure mechanical properties of soft materials at nanometer scale. To date, the Hertzian theory was used for analyzing force-distance curves as the simplest model among several contact mechanics between elastic bodies. However, the preexisting methods based on this theory do not consider the adhesive interaction in principle, which cannot be neglected in the ambient condition. A new analytical method was introduced to estimate the elasticity and the adhesive energy simultaneously by means of the JKR theory, describing adhesive contact between elastic materials. Poly(dimethylsiloxane) (PDMS) and isobutylene-co-isoprene rubber (IIR) were analyzed to verify the applicable limit of the JKR analysis. For elastic samples such as PDMS, the force-deformation plots obtained experimentally were consistent with JKR theoretical curves. Meanwhile, for viscoelastic samples, especially for IIR, the experimental plots revealed large deviations from JKR curves depending on scanning velocity and maximum loading force. Some nano-rheological arguments were employed based on the difference between these specimens.     

THE COMPARISON OF LANZHOU LOESS PROFILE WITH VOSTOK ICE CORE IN ANTARCTICA OVER THE LAST GLACIATION CYCLE

Loess near Lanzhou in the late Pleistocene is very sensitive to climatic fluctuations. The Beiyuan terrace profile in Linxia City, of which the curve of susceptibility tallies with the trend of isotopic curves of Vostok 2083 m ice core in Antarctica, is 35m thick. There are five layers of paleosols under Malan loess(L_1). Upper three layers (S_(1-a),S(1-b)and S_(1-c) correspond to three warm stages in last interglaciation, Interstadial of Last Glacial (C stage in Antarctic ice core)was clearly recorded in the Beiyuan profile, in which three layers of paleosols and two of loess were formed. The lowest section of the profile belongs to penultimate glaciation, in which fossils of cold-drought-resistant mammal and mollusc have been discovered.     

Membrane-oxide semiconductor field-effect transistor (MOSFET) sensors

MOSFET-sensors can be considered as membrane-oxide-semiconductor field-effect transistors. MOSFETs can be divided into ISFETs, GasFETs, BioFETs, these sensors being sensitive to ion, gas, biomolecules respectively and there is also a possibility to fabricate MOSFET reference electrode (RefFET). The development and theoretical treatment of various type of MOSFET-sensors are presented in this paper.     

LIMS系统在实验室规范运作中的应用

简要介绍了LIMS系统及其对规范实验室运作发挥的作用和在应用中的具体情况。     

Approximation of titration curves and other sigmoidal functions by proportionally spaced cubic B-splines

Proportionally spaced cubicB-splines are an appropriate function system for the approximation of titration curves and other sigmoidal functions. They give a smooth weighted leastsquares fit without instability problems. The degree of smoothing depends only on the number of spline function which can be chosen by the user. The equivalence points of titration curves can be estimated with high accuracy from the zeros of the second derivative.The method gives good approximation curves even in the case of empty data regions, i. e. there are no artefacts in subranges where no data points exist. The routine has been tested successfully with large series of simulated and experimental data.     

Differences in the electrorheological response of a particle suspension under direct current and alternating current electric fields

We have observed an unusual reduction of shear stress with increasing shear rate under direct current electric fields, for an electrorheological fluid composed of sulfonated poly(styrene-co-divinylbenzene) particles dispersed in silicone oil. At all shear rates, the shear stress under the electric field is larger than that in the absence of the field, indicating that there is still some field-induced agglomeration of the particles. In contrast, the behavior under alternating current electric fields is the Bingham-fluid-type response commonly observed with electrorheological fluids. It is suggested that the conventional dipole–dipole interaction approach based on simplified microstructural models would be unable to explain these phenomena. Received: 27 November 2000 Accepted: 22 May 2001     

倒数示波计时电位滴定新技术

倒数交流示波极谱具有抑制充电电流、突出电解电流的优点,利用(dE/dt)~(-1)-E曲线上去极剂峰的突然消失或出现指示滴定终点的方法称作倒数示波计时电位滴定法.由运算放大器组装的模拟电子线路可以对(dE/dt)~(-1)-E曲线进行反馈、反对数及微分处理,从而获得各种类型的倒数示波计时电位曲线(图1),以进一步提高滴定的灵敏度。     

Effect of the Electrode Potential on the Oxygen Reaction Rate in the Electrode System O2, Au/La0.88Sr0.12Ga0.82Mg0.18O2.85

The polarization dependences of a porous gold electrode in contact with a solid electrolyte of the composition La_0.88Sr_0.12Ga_0.82Mg_0.18O_2.85 are studied at 600–800°C and oxygen pressures of 2 × 10⁻²-1 atm. It is shown that the rate of cathodic reduction of oxygen out of the gas phase depends on the preliminary treatment of the sample. The activation energy is equal to 110–135 kJ mol⁻¹ at a low polarization. After increasing the polarization, the activation energy for the cathodic reduction of oxygen equals 75–85 kJ mol⁻¹ and depends on the oxygen pressure as a power function with a power index of 1/4. The rate of the anodic evolution of oxygen is dependent neither on the preliminary treatment of the sample nor on the oxygen pressure in the gas phase and the polarization curve has a characteristic segment, which corresponds to a limiting overvoltage.__________Translated from Elektrokhimiya, Vol. 41, No. 8, 2005, pp. 954–962.Original Russian Text Copyright © 2005 by Shkerin, Sokolova, Beresnev.     

Improvement of plant parameters of the ROBO gamma irradiation facility due to design modification

Two industrial scale, “ROBO” type ⁶⁰Co gamma irradiation facilities have recently been put into operation in Syria and Peru, and the dosimetry commissioning of both plants have been carried out to determine dose distribution within products and to calculate plant parameters such as efficiency, dose uniformity ratio and throughput. There are some design modifications between the two plants in connection with the location of the carriers with respect to the source plaque and also to each other. The effect of these construction modifications on the plant parameters is discussed in the analysis of the dose distribution data measured in the carriers with depth and height among the four irradiation rows on both sides of the source plaque. The plant parameters were also calculated for different product densities using the technical data of the facilities, and the calculated and measured results were compared to each other.