High temperature corrosion behaviour of M(Co,Ni)CrAIY-coatings on high temperature materials-microanalytical investigations

In our former investigations, the phenomenon high temperature corrosion (HTC) was described exemplarily on selected materialcoating combinations for blades of stationary gas turbines, mainly in the temperature region of up to 750° C. To answer the question, in which manner higher gas inlet and/or higher material surface temperature would influence the HTC behaviour, a special analytical technique—the integral layer profile analysis—was introduced to ameliorate concentration profile methods. By examining IN 738 LC specimens with CoCrAlY plasma spray coating, stressed by hot gas at 900° C, the limits of this system are shown by explaining the corrosion mechanism; the method is also used for other systems, e.g. U 520 with NiCrAlY coating at 750° C.     

D072型树脂脱除过氧化氢中金属阳离子的工艺研究

实验考察D072型阳离子交换树脂在交换柱中脱除过氧化氢中微量金属阳离子的动态行为．通过改变料液流速、高径比、料液中交换离子浓度及料液组成等参数，绘制不同条件下的透过曲线，以此考察D072型树脂对过氧化氢中金属阳离子的动态交换性能，从而确定适宜的工艺条件，为工业化生产提供科学依据．     

交流示波极谱法中if～E曲线的研究（Ⅱ）：if～E曲线的理论公式

提出利用i_f～E曲线代替常用的dE/dt～E曲线的新的交流示波极谱法,并研究了该法的基本理论,推导出i_f～E曲线的理论公式。     

从静态应力松弛实验求材料准松弛时间谱的一种数值计算方法

避开繁琐困难的函数求解过程，采用数值计算方法，从常规的静态应力松弛实验，直接求被测材料的松弛单元的表现松弛强度．主松弛时间τ０由单－ＭＡＸＷＥＬＬ模型求得，其他松弛时间分别约取为１０（－２）·τ０，１０（－１）·τ０，１０１·τ０，１０３·τ０。应力松弛万程取５参数模型，记为谱的强度ａｉ（或Ａｉ）通过多元线性回归，由最小二乘法确定．对一种天然橡胶试样在不同温度下的松弛曲线进行处理，回归值与原始实验值吻合良好，不同温度下的松弛单元对总松弛的贡献，反映出温度对松弛过程的活化作用．     

An approach to analysis of pigment release from microcapsules with size distribution

We have studied the release curve for microcapsules with size distribution. On the basis of an analogy to the relaxation phenomena with multiple characteristic times, we propose a stretched exponential release curve for the system with size distribution and relate the release curve to the size distribution function of the microcapsule. This method was successfully applied to the transfer of azo-pigments from inner medium of dioctyl phthalate to dispersing medium of methanol through poly(ureaurethane) microcapsule membrane.     

A multireference configuration interaction method based on the separated electron pair wave functions

A multireference configurational interaction method based on the separated electron pair (SEP) wave functions, SEP‐CI approach, has been developed as an approximation to the traditional CASSCF method. It differs from the CASSCF method in that active orbitals are obtained from the SEP wave function without further optimization in the subsequent CI calculations, and the active space is automatically constructed according to the occupation coefficients of SEP natural orbitals. These features make the present SEP‐CI method computationally much less demanding than the CASSCF method. The applicability of the SEP‐CI method is illustrated with sample calculations on the insertion reaction of BeH₂ and dissociation energies of LiH, BH, FH, H₂O, and N₂. © 2005 Wiley Periodicals, Inc. J Comput Chem 27: 39–47, 2006     

Polarization Dependence of a Hydrophobized Electrode for Electrosynthesis of a Soluble Product

An equation for a polarization curve of a hydrophobized electrode is proposed for electrosynthesis of a soluble electroactive product in an inner-kinetic mode. The equation contains the concentration of the target product (TP) in an explicit form. The shape of the curve depends on the biquadratic root of the TP concentration and the square root of the ratio between exchange currents of the side and target reactions.     

交流示波极谱法中i_f～E曲线的研究 Ⅳ.示波极谱氧化还原滴定法

在i_f～E曲线的测量方法中,由于氧化和还原剂都具有电化学活性,因此,这两种试剂的量就可以通过不同电极电位处的法拉第电流峰敏锐地反映出来。当利用i_f～E曲线指示氧化还原滴定终点时,终点的示波图形,不仅反映氧化和还原剂电流峰的出现和消失,而且反     

我国粘度计量工作中存在的问题

指出我国粘度计量工作中存在的一些问题，在修订粘度计检定规程，规范标准粘度的名称和有效期以及加强对粘度计检定工作的管理等方面的出了建议，强调了在标准粘度液证书中应给出不同温度下的运动粘度和粘度值，以满足粘度计检定工作的需要。     

双船联合举升多体协同作业系统横摇稳性评估

基于ADAMS平台,构建特定场景双船联合举升多体协同作业系统虚拟样机,对新型一体化拆解作业双船联合举升过程中待拆除组块横摇稳性进行预测与评估。构建了该系统拓扑模型,使用几何参数描述系统中上部组块横摇运动特征;通过虚拟样机仿真探究了双船不同耦合运动情况时上部组块最危险失稳状态,并分析了上部组块重心至连接点连线垂直距离与水平距离比值对横摇角度的影响规律。结果表明:物理模型试验数据驱动的虚拟样机技术可以有效评估该系统运动特征,与几何拓扑模型得到的上部组块横摇失稳角度理论公式计算结果吻合;双船同相位横摇与反相位垂荡耦合运动时对上部组块横摇稳性影响最大;待拆除上部组块横摇失稳时的极限纵横比可以作为复杂多体系统横摇稳性评估参数,为实际工程方案选择提供参考。