空调水泵变频调节的变压差控制研究

水泵变频的变压差控制就是使压差随着流量的减少而减小,保持管路特性曲线不变,尽量减少系统的无用能耗。实例计算表明,与定压差控制相比,变压差控制需要增加的成本不多,节省的能耗却多了一倍。     

Influence of moisture on the viscoelastic relaxations in long aliphatic chain contained semiaromatic polyamide, (PA9‐T) fiber

The effect of moisture on the mechanical relaxation processes of semiaromatic semicrystalline polyamides synthesized by a long‐chain aliphatic diamine and terephthalic acid was investigated by dynamic viscoelastic analysis (DVA) and differential scanning calorimetry (DSC). Moreover, the implication of moisture with the amorphous and crystalline domains was also examined by temperature‐dependent wide‐angle X‐ray diffraction and Fourier transform infrared spectra. The characteristics of the relaxations such as α, β, γ, and the pronounced peak shoulder appeared at 25–100 °C in DVA tan δ curves were found to be strongly susceptible to the presence of moisture. With moisture evaporation, the peak shoulder of 25–100 °C and the β‐relaxation disappeared. The former is anticipated to originate from to the side group motion of hydrogen‐bonded water, whereas the later one is from the motions of the amide–water complex units. With the disappearance of the β‐relaxation, the γ‐relaxation appeared simultaneously in much lower temperatures and ultimately coupled with the δ‐relaxation. The γ‐relaxation is attributed to be associated with the molecular motion of the amide group and δ‐relaxation with for the motion of the methylene units. The existence of two types of water was identified in the polymer, namely, tightly bound and loosely bound. The tightly bound water is believed to be directly connected by hydrogen bonding with the strong polar groups and the loosely bound water weakly links with those connected water making hydrogen bridges. The moisture acts as a plasticizer in the polymer matrix, which causes quite a large depression in its glass transition temperature (T_g). WAXD and FTIR studies corroborated the existence of water solely in amorphous regions, i.e., no rapport of water with the crystalline parts. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2878–2891, 2003     

火力发电厂废水中悬浮物处理的影响因素探讨

对火力发电厂废水中悬浮物处理的影响因素如pH值、水温、接触介质、进水水质、混凝剂加入量等进行分析，对主要影响因素水温和混凝剂加入量进行了试验分析，制定出废水悬浮物处理的合理方案。     

Dispersion analysis of the least‐squares finite‐element shallow‐water system

The frequency or dispersion relation for the least‐squares mixed formulation of the shallow‐water equations is analysed. We consider the use of different approximation spaces corresponding to co‐located and staggered meshes, respectively. The study includes the effect of Coriolis, and the dispersion properties are compared analytically and graphically with those of the mixed Galerkin formulation. Numerical solutions of a test problem to simulate slow Rossby modes illustrate the theoretical results. Copyright © 2003 John Wiley & Sons, Ltd.     

用高品位高硫铝土矿生产氧化铝时的除硫新方法研究

本文研究了贵州高硫型高品位铝土矿溶出性能,考查了石灰添加量、溶出温度、苛性碱浓度和溶出时间对氧化铝溶出率的影响以及铝土矿的硫向溶液中的转化率(即硫的溶出率)的影响;还研究了用铝酸钡净化拜耳赤泥洗液的除硫条件和效果。     

对青海省高等级公路水资源利用技术的思考

青海省自然环境条件恶劣，公路绿化建设难度大，突出表现在降雨量少且集中、蒸发量大、不同地区分布不均等特点，路侧植物存活与生长困难，建设成效不理想．在降雨量小时起不到补充水分的作用，大雨暴雨时雨水白白流走，并对公路边坡稳定构成威胁．在这样的条件制约下．本研究提出在保护沿线生态环境的前提下，将雨水有效地收集起来，用于公路的植被恢复，既保护了水资源，同时也减少了水害对公路的影响．     

Experimental analysis of current and deformation of ion-exchange polymer metal composite actuators

In this paper we describe the experimental analysis of a novel ion-exchange polymer metal composite (IPMC) actuator under large external voltage. The experimental analysis is supplemented with a coupled thermodynamic model, which includes mass transport across the thickness of the polymer actuator, chemical reactions at boundaries, and deformation as a function of the solvent (water) distribution. In this paper, the case of large electrode potentials (over 1.2 V) has been analyzed experimentally and theoretically. At these voltage levels, electrochemical reactions take place at both electrodes. These are used in the framework of overpotential theory to develop boundary conditions for the water transport in the bulk of polymer. The model is then simplified to a three-component system comprised of a fixed negatively charged polymeric matrix, protons, and free water molecules within the polymer matrix. Among these species, water molecules are considered to be the dominant species responsible for the deformation of the IPMC actuators. Experiments conducted at different initial water contents are described and discussed in the context of the proposed deformation mechanism. Comparison of numerical simulations with experimental data shows good agreement.     

软x射线近贴显微技术

软x射线近贴显微技术不但可使活的生物样品成象,分辨率高于光学显微镜,而且人为的样品准备程序在该技术中都可避免。本文描述了用高功率激光打靶产生的等离子体作为软x射线源而进行的近贴显微研究,并得到了分辨率好于1μm的结果。     

300 MN水压机垫板组力学行为规律研究

针对巨型水压机多层垫板组力学行为的多维非线性特征,本文应用作者开发的多体接触有限元程序,分析了300MN水压机垫板组力学行为规律,揭示了垫板组加载方式为几何空间状态与力学行为的相关性,说明了垫板组异常变形机制,提出了垫板组设计和使用的几点准则。     

乙酸苄酯合成新工艺的研究

本文介绍了用环己烷作带水剂．D—72作催化剂的苄醇直接酯化合成乙酸苄酯新工艺；带水剂能回收循环使用，缩短了反应时间，降低了生产成本。同时，还对配料比、催化剂和带水剂用量、反应时间等因素对产率的影响进行了讨论。