基于微观渗流机理的宏观油藏数值模拟研究

处于高含水开发期油藏的剩余油分布主要受流体性质和岩石孔隙结构的影响，而经典数值模拟并没有考虑微观孔喉特征的影响。为此建立了描述微观孔喉特征的地层孔隙网络模型，并对构成网络的基本连线单元进行改进，使网络模型能更细致地描述油水分布特征和水驱油微观机理。利用逾渗理论计算了基于微观渗流机理的相对渗透率曲线，并将其应用到经典数值模拟计算中，实现了微观渗流机理与宏观数值模拟计算的结合。实例分析表明，利用该数值模拟计算方法得到的基于微观特征的剩余油分布更符合地下实际流体分布，其结果可为调剖堵水、化学驱提供技术参数。     

On the excitation of a closely spaced array by a line source

An infinite row of periodically spaced, identical rigid circularcylinders is excited by an acoustic line source which is parallelto the generators of the cylinders. A method for calculatingthe scattered field accurately and efficiently is presented.When the cylinders are sufficiently close together, Rayleigh–Blochsurface waves that propagate energy to infinity along the arrayare excited. An expression is derived which enables the amplitudesof these surface waves to be computed without requiring thesolution to the full scattering problem.     

上海基础房价相关指标及走势的分析与研究

基础房价的相关指标及其走势一直是大众关心的热门话题．本文通过对上海基础房价相关指标的分析，建立了市场房价走势的两个数学模型．模型一：在相关性分析的基础上利用主成分分析消除指标间的共线性，再用回归拟合房价模型并进行预测；模型二：在相关性分析的基础上利用核估计方法预测出房价．继呵对2005年下半年的房价走势进行了预测，得出的结果与实际情况相吻合．     

新疆野生黑加仑与马林果实的营养成分分析

通过对新疆野生黑加仑和野生马林的脂肪油，8种微量元素，17种氨基酸以及维生素C的含量进行测定得出：黑加仑脂肪油含量为17．9％，马林的脂肪油含量为22．3％，其中，黑加仑脂肪油中，r－亚麻酸的含量为19．02％，而马林中，其含量为9．40％，黑加仑中K，Na,Ca,Cu,Zn,Fe的含量比马林中的含量高，而Mn,Mg元素的含量却比马林含量低；马林的维生素C含量为16．22mg/g，黑加仑的含量为108mg/g，黑加仑的氨基酸的总量为1．63％，马林为1．14％。     

三基色计算全息图

介绍了三基色计算全息图的设计与制作，用白光光源照明该全息图，可以演示光的叠加，再现彩色图像并给出了理论分析和相应的实验结果。     

类Kerr介质中双模SU(1,1)相干态场与Λ型三能级原子相互作用的量子统计性质

导出了类Kerr介质中双模SU(1,1)相干态场与Λ型三能级原子相互作用系统的态函数,研究了Kerr效应对Λ型三能级原子布居概率、双模SU(1,1)相干态场的互关联函数、Cauchy-Schwartz不等式及二阶相干度的影响.结果表明:Kerr效应使原子与光场的耦合减弱,原子布居的崩塌与复苏的周期缩短;在初始光场较弱和较强两种情况下,类Kerr介质对双模SU(1,1)相干态场两模间的相关性、相关程度以及光子的聚束与反聚束效应产生的作用有明显的区别.     

我国医疗费用增长与医疗设备投入的相关性研究

近年来我国卫生总费用占GDP的比例增长很快,而在卫生费用结构上则发生政府投入下降和个人支出的上升。本文采集了大量的统计数据,采用统计相关性研究的方法,论证了医疗设备规模的不断扩大是导致医疗费用上升的主要因素之一;医疗设备的快速增长与医院维修费用投入的增长直接相关,而引起医疗设备维修大量投入的主要原因则是故障期内医疗设备的非正常闲置。本文通过对个人卫生费用的上升、医疗设备规模的扩大及其医疗设备维修投入费用增加相关性的分析,说明了在这种关系下,十分有必要研究医院医疗设备维修体系,以在卫生投入和患者权益上达到平衡。     

Feasibility study for the preparation of certified reference materials part I – mineral oil contaminated soils

The international joint project HYCREF (Contract No. G6RD-CT-2002-00854), funded by the European Commission in the 5th Framework programme, aimed to develop methods to prepare homogeneous and stable reference materials of water, soil, and waste contaminated with mineral oil hydrocarbons and to certify the mineral oil content by gas chromatographic methods. The results of a feasibility study for the preparation of three soil reference materials are discussed in this paper, and for the preparation of three waste reference materials in the second part (Koch et al., Accred Qual Assur submitted for publication). The soil materials were selected to represent different soil types and contamination levels. The project plan set three requirements for these reference materials: uncertainty in the mineral oil content resulting from the certification exercise <5%, a sample inhomogeneity of <3% and a minimum long-term stability of 5 years. For the most part, these requirements were met within this project.     

Quadrupole interactions at 57Fe and 119Sn in 3d-metal antimonides

3d-metal antimonides: Fe_1+x Sb, N_+x Sb, Co_+x Sb and the (Ni_1?y Fe _y )Sb solid solution have been studied by the Mössbauer effect method at ⁵⁷Fe and ¹¹⁹Sn. It was found that the quadrupole interactions at the Fe and Sn nucleus in 3d-metal antimonides are very sensitive to the filling of different crystallographic sites with metal atoms. The metal atoms in trigonal-bipyramidal sites have a strong effect on the quadrupole splitting of ¹¹⁹Sn. They are nearest to anions (Sb or Sn) with the typical axial ratio of c/a = 1.25. The QS(x) dependence of ¹¹⁹ Sn in 3d-metal antimonides in the 0 ≤ x ≤ 0.1 concentration range can be used to determine x – the concentration of transition metal excess relative to the stoichiometric composition.     

Measuring Light Field of Light Source with High Directional Resolution Using Mirrored Ball and Pinhole Camera

This paper presents a method of measuring a light field of a light source with high directional resolution using a mirrored ball and a pinhole camera. The light field describes a spatial and directional distribution of radiances from the light source. The directional distribution is expanded by a reflection on the mirrored ball, and the radiances are measured by a charge-coupled device (CCD) camera with a pinhole lens. The light source is laterally moved by a robot arm to measure the directionally expanded light field, and each pixel on a CCD can obtain the radiances from the light source through the pinhole lens with high directional resolution. The light field is estimated from the pixel value and the position of each pixel using a ray tracing technique. The light field of a krypton lamp was experimentally measured by the proposed method, and the accuracy of the measurement was evaluated against the irradiances measured by a spectro-radiometer at sample points.