Feasibility study for the preparation of certified reference materials part I – mineral oil contaminated soils

The international joint project HYCREF (Contract No. G6RD-CT-2002-00854), funded by the European Commission in the 5th Framework programme, aimed to develop methods to prepare homogeneous and stable reference materials of water, soil, and waste contaminated with mineral oil hydrocarbons and to certify the mineral oil content by gas chromatographic methods. The results of a feasibility study for the preparation of three soil reference materials are discussed in this paper, and for the preparation of three waste reference materials in the second part (Koch et al., Accred Qual Assur submitted for publication). The soil materials were selected to represent different soil types and contamination levels. The project plan set three requirements for these reference materials: uncertainty in the mineral oil content resulting from the certification exercise <5%, a sample inhomogeneity of <3% and a minimum long-term stability of 5 years. For the most part, these requirements were met within this project.     

激光诱导化学气相合成纳米微粉的物理化学模型

针对激光低压化学气相合成纳米微粉材料的过程建立了物理化学统一模型,其中包括气体分子动力学、化学反应热力学和流体动力学三部分.分别介绍了模型的基本假设、基本公式及主要结论.描述了反应物分子的热运动状态,提出了激光强度阈值的预测方法,给出了生成物颗粒的成核速率、生长速率和最终粒径.模型对进一步揭示纳米微粉生成过程的物理化学机制,寻找宏观工艺参量对微观合成过程及所制备纳米微粉性质的影响规律有实际意义.     

Optical absorption of lithium metal vapor at high temperatures

Experimental results are reported for a unique spectroscopic device called the Plasma Spectroscopy Cell. Optical absorption of lithium metal vapor was observed at high density and temperature. Absorption spectra are analyzed using theoretical calculations of absorption cross sections for lithium-helium interactions, and singlet and triplet state transitions of diatomic lithium in the visible spectral range. This is believed to be the most complex example yet calculated in which absolute bound-bound, bound-free, free-bound, and free-free contributions for all possible optically allowed transitions are all included, in quite respectable agreement with experiment.     

美国对非石油战略的地缘政治透视

冷战时期，非洲由于丰富的自然资源和重要的战略位置成为美苏两个超级大国争夺的重要区域。冷战结束以后，随着前苏联的解体，非洲的战略地位有所下降，美国对非洲的兴趣也日益减弱。但近几年来，美国对非洲的战略开始由冷变热。文章从政治地理角度对美国近年来对非石油战略的转变进行了分析。     

增塑剂ZS-301的合成研究

以棕榈油为原料合成增塑剂ZS-301，对棕榈油品质(以熔点计)，氢氧化钠用量，氯化锌用量通过正交试验进行了确定。结果表明最佳条件为：选择熔点为48℃～51℃的棕榈油．氢氧化钠的用量16份，氯化锌用量15份(以棕榈油重量为100份计)。在最佳条件下所制得的10批样品均符合国外Pirelli公司同类产品的指标要求。     

断裂带作为油气散失通道的输导能力

通过断裂散失的油气量主要与断裂带的输导能力、实际进入断裂带的油气量、断裂通道的长度、散失时间和储层分流系数等参数有关。断裂带输导能力的主要因素是断裂带的宽度和储层渗透率。利用断裂散失模型计算了不同规模的断裂带作为油气散失通道的输导能力。计算结果表明 ,大型断裂带输导油气的能力远大于储层输导油气的能力。断裂活动期进入“通天”大断裂带的油气主要趋于散失 ;小断裂由于储层的分流作用 ,即使在活动期 ,它作为油气散失通道的作用也是有限的 ,其油气的散失量可以忽略不计。     

Wavelength dependence in photochemical vapor deposition of aluminum film using dimethylaluminum hydride

In photochemical vapor deposition of aluminum film on silicon using dimethylaluminum hydride, (CH₃)₂AlH, a surface reaction dominated below a (CH₃)₂AlH pressure of 0.3 m Torr at 200°C, which was induced only with the 160 nm band emitted from a deuterium lamp. A gas-phase reaction occurred above 0.3 mTorr at 200°C, which could be induced by both 160 nm and 240 nm emission bands from the lamp. To distinguish between surface ad gas-phase reactions, a thickness profile was used. At 240°C the surface reaction could be induced even by the 240 nm band, while the deposits formed under illumination of the two bands were thinner than those obtained with only the 240 nm band, indicating occurrence of vacuum ultraviolet (VUV)-enhanced desorption. The mechanism responsible for the observed wavelength dependence in unclear. The electrical resistivity of the films deposited at 200°C was 4.5 μΩ cm, which did not change with wavelength.     

光学薄膜在现代汽车工业中的应用

本文论述应用光学薄膜技术对汽车窗口玻璃和塑料的若干性能进行改进的技术发展水平，这些性能包括塑料表面的硬化，红外区的反射，紫外区的吸收，偏振化作用，双折射，憎水性以及光学角度选择性等，评论等离子体处理和物理蒸汽淀积薄膜工艺近来应用的一些例子。对于物理蒸汽淀积薄膜所提供的异常功能连同实际使用中它们的耐久性作了特殊的强调。     

A RAPID APPROXIMATION FOR PREDICTING THE HYDROCARBON DISCOVERY RATE: PART 1. ASSESSING THE ACCURACY

The hydrocarbon discovery prediction problem is important to firms having to make decisions about the deployment of scarce exploration resources. Traditional methods for estimating the discovery rate rely on the completion of time consuming simulation experiments. A rapid approximation that does not require the completion of simulation exists and has been shown to have some promise as a prediction tool. This paper investigates the accuracy of the approximation method under a wide variety of distributional and drilling efficiency assumptions. The results indicate that the approximation produces predictions close to those of simulation under most of the tested conditions. This suggests that resource exploration firms could conveniently use the method for a wide variety of planning purposes without incurring the same costs in time and personnel required for simulation.