Characterization of a Novel Dioxomolybdenum Complex by Cyclic Voltammetry

Metalloenzymes that carry a pterin-based molybdenum cofactor in their center catalyze numerous reactions in the human body and play a crucial role in its metabolism. Specifically, these enzymes promote redox reactions and oxygen transport in the body. Their absence may cause many problems leading to disability or even death in early childhood. Therefore, model compounds need to be synthesized and analyzed to investigate the reactivity, redox potential, and geometry of these cofactors. This study focused on electrode processes and determined the redox potentials of the new bis-(4-mercapto-5-(p-tolyl)-3H-1,2-dithiole-3-thione)-dioxomolybdenum complex by cyclic voltammetry. The 4-mercapto-5-(p-tolyl)-3H-1,2-dithiole-3-thione ligand underwent irreversible oxidation and reduction at thiol and thione functional groups. The new dioxomolybdenum complex showed a quasi-reversible two-stage electrode process.     

Rapid green and blue light‐induced CO release from bromazepam Mn(I) and Ru(II) carbonyls: synthesis,density functional theory and biological activity evaluation

Two new photoactivatable carbon monoxide‐releasing molecules (CORMs), fac ‐[Mn(CO)₃(BZM)Br] ( 1 ) and [RuCl₂(BZM)(CO)₂] ( 2 ), derived from the anti‐anxiety drug bromazepam (BZM) and capable of rapid release of CO upon the illumination with light‐emitting diode (LED) source light (470–525 nm) have been synthesized and characterized. The photo‐delivery of CO to myoglobin solution could be achieved via the illumination of 1 at 525 nm for 10 min or at 470 nm for 1 min. The addition of water to a dimethylsulfoxide (DMSO) solution of 1 increases its stability, but it decreases the rate of the CO‐releasing process. CORM 2 behaves as a good visible photoCORM, whereby its two CO molecules are released within 10 min upon exposure to LED light source at 470 nm in DMSO. The illumination profile of 2 was also examined using solution infrared spectroscopy. The cis /trans stereochemistry around the Ru(II) ion was determined using quantum chemical calculations. The formation of photoCORMs leads to an improvement in the toxicity of BZM against tested microbes.     

Tungsten Nitride‐Cobalt Anchored in N‐Doped Ordered Porous Carbon as an Efficient Oxygen Reduction Reaction Electrocatalyst

We prepared a non‐precious‐metal tungsten nitride‐cobalt (WN‐Co) electrocatalyst anchored in nitrogen‐doped ordered porous carbon (NOPC) through an in situ method. The WN‐Co/NOPC electrocatalyst possesses good oxygen reduction reaction (ORR) capability in alkaline media, including a high onset potential of −132 mV, a dominant four‐electron process, and a superior stability (onset potential and limiting current density were almost unchanged after 5000 cycles in 0.1 m KOH). The improved ORR performance was comparable to that of WN/NOPC and Co/NOPC with regard to three aspects: the even dispersion and uniform size of electrocatalyst particles provide more reactive sites; the nitrogen doping, high specific surface area and highly ordered mesoporous channel of catalyst support (NOPC) are conducive to the infiltration of the electrolyte; the existence of WN reinvests the catalyst with good stability, and the anchored configuration of WN and Co in the NOPC will prevent the particles from agglomerating after a long‐term cycle, thereby improving the stability of the catalyst particles.     

Self-Assembly Approach Towards MoS2-Embedded Hierarchical Porous Carbons for Enhanced Electrocatalytic Hydrogen Evolution

Transition metal-based nanoparticle-embedded carbon materials have received increasing attention for constructing next-generation electrochemical catalysts for energy storage and conversion. However, designing hybrid carbon materials with controllable hierarchical micro/mesoporous structures, excellent dispersion of metal nanoparticles, and multiple heteroatom-doping remains challenging. Here, a novel pyridinium-containing ionic hypercrosslinked micellar frameworks (IHMFs) prepared from the core–shell unimicelle of s-poly(tert-butyl acrylate)-b-poly(4-bromomethyl) styrene (s-PtBA-b-PBMS) and linear poly(4-vinylpyridine) were used as self-sacrificial templates for confined growth of molybdenum disulfide (MoS₂) inside cationic IHMFs through electrostatic interaction. After pyrolysis, MoS₂-anchored nitrogen-doped porous carbons possessing tunable hierarchical micro/mesoporous structures and favorable distributions of MoS₂ nanoparticles exhibited excellent electrocatalytic activity for hydrogen evolution reaction as well as small Tafel slope of 66.7 mV dec⁻¹, low onset potential, and excellent cycling stability under acidic condition. Crucially, hierarchical micro/mesoporous structure and high surface area could boost their catalytic hydrogen evolution performance. This approach provides a novel route for preparation of micro/mesoporous hybrid carbon materials with confined transition metal nanoparticles for electrochemical energy conversion.     

On the Role of Alkali-Metal-Like Superatom Al12P in Reduction and Conversion of Carbon Dioxide

Developing efficient catalysts for the conversion of CO₂ into fuels and value-added chemicals is of great significance to relieve the growing energy crisis and global warming. With the assistance of DFT calculations, it was found that, different from Al₁₂X (X=Be, Al, and C), the alkali-metal-like superatom Al₁₂P prefers to combine with CO₂ via a bidentate double oxygen coordination, yielding a stable Al₁₂P(η²-O₂C) complex containing an activated radical anion of CO₂ (i.e., CO₂^.−). Thereby, this compound could not only participate in the subsequent cycloaddition reaction with propylene oxide but also initiate the radical reaction with hydrogen gas to form high-value chemicals, revealing that Al₁₂P can play an important role in catalyzing these conversion reactions. Considering that Al₁₂P has been produced in laboratory and is capable of absorbing visible light to drive the activation and transformation of CO₂, it is anticipated that this work could guide the discovery of additional superatom catalysts for CO₂ transformation and open up a new research field of superatom catalysis.     

Morphological,Thermal, and Electrical Characterization of Syndiotactic Polypropylene/Multiwalled Carbon Nanotube Composites

In this work, syndiotactic polypropylene/multiwalled carbon nanotubes (MWCNT) nanocomposites, in various concentrations, were produced using melt mixing. The influence of the addition of MWCNT on the morphology, crystalline form, and the thermal and electrical properties of the polymer matrix was studied. To that aim, scanning electron microscopy, Raman spectroscopy, X-ray diffraction, differential scanning calorimetry, and dielectric relaxation spectroscopy were employed. Significant alterations of both the crystallization behavior and the thermal properties of the matrix were found on addition of the carbon nanotubes: conversion of the disordered crystalline form I to the ordered one, increase of the crystallization temperature and the degree of crystallinity, and decrease of the glass transition temperature and the heat capacity jump. Finally, the electrical percolation threshold was found between 2.5–3.0 wt.% MWCNT. For comparison purposes, the results of the system studied here are also correlated with the findings from a previous work on the isotactic polypropylene/MWCNT system.     

Relation between interfacial shear strength and compressive strength of carbon fiber/epoxy resin composite strands

The mechanism with which the fiber-matrix interfacial strength exerts its influence on the compressive strength of fiber reinforced composites has been studied by measuring the axial compressive strength of carbon fiber/epoxy resin unidirectional composite strands having different levels of interfacial shear strength. The composite strands are used for experiments in order to investigate the compressive strength which is not affected by the delamination taking place at a weak interlayer of the laminated composites. The interfacial strength is varied by applying various degrees of liquid-phase surface treatment to the fibers. The efficiency of the compressive strength of the fibers utilized in the strength of the composite strands is estimated by measuring the compressive strength of the single carbon filaments with a micro-compression test. The compressive strength of the composite strands does not increase monotonically with increasing interfacial shear strength but showes lower values at higher interfacial shear strengths. With increasing interfacial shear strength, the suppression of the interfacial failure in the misaligned fiber region increases the compressive strength, while at higher interfacial shear strengths, the enhancement of the crack sensitivity decreases the compressive strength.     

Copper nanoclusters conjugated silica nanoparticles modified on carbon paste as an electrochemical sensor for the determination of dopamine

An electrochemical sensor based on modification of carbon paste electrode by glutathione‐capped copper nanoclusters silica nanoparticles (CuNCs/SiO₂NPs) composite for determination of dopamine in the presence of ascorbic acid was presented. Transmission electron microscopy, scanning electron microscopy, energy dispersive X‐Ray analysis, X‐ray photoelectron spectroscopy, Fourier‐transform infrared spectroscopy, X‐ray diffraction and electrochemical impedance spectroscopy were used for characterization of the developed electrode. The electrochemical behavior of dopamine on CuNCs/SiO₂NPs/carbon paste electrode was investigated by cyclic voltammetry and differential pulse voltammetry. Dopamine was determined in the range of 10.0 – 900.0 μM, and the limit of detection was obtained as 0.43 μM. The electrochemical behaviors of the coexisting electroactive species, which often cause interference with the determination of dopamine, were investigated. The results show that the developed electrode does not show any interference with respect to coexisting species, even in the presence of ascorbic acid. The developed electrochemical sensor was further employed for the determination of dopamine in human blood plasma, with a good recovery.