智慧图书馆人才队伍建设初探

介绍了智慧图书馆的理论研究现状及构建路径,分析了智慧图书馆人才队伍建设中存在的问题,对智慧图书馆员的培养目标及培养策略进行了探讨。     

血清miRNA提取方法的优化

利用正交试验法优化血清miRNA的提取方法,为进一步研究血清miRNA作为生物标记物提供方法学基础.本文以hsa-miRNA-223-3p,hsa-miRNA-483-5p和hsa-miRNA-16为检测目标,通过比较Trizol法和Trizol+酚/氯仿法的miRNA提取效率和qPCR检测结果,应用正交试验选择出最优实验方案.结果表明血清miRNA的最优提取方法为:血清用DEPC水4倍稀释,离心条件为4℃,12 000r·min-1,离心时间为10min,Trizol法提取.     

大尺寸工程模型试验中的相似材料配比试验研究

大型物理模型试验是研究复杂工程问题的重要方法，如何快速、准确地确定相似材料配比是试验中至关重要的一环.为降低试验成本、简化试验步骤、充分调用原料性能，采用河砂、水泥和石膏这三种最普通的原料，以骨胶比(河砂与水泥石膏的质量比)和水膏比(水泥与石膏的质量比)为变量，进行了45组对比试验，对相似材料的物理及动、静力学参数进行了研究.获得了以河砂、水泥和石膏为原料配制的相似材料各物理量的变化区间；探讨了骨胶比和水膏比对相似材料各物理量的控制作用，并对比了其敏感性；基于多元线性回归分析建立了各因素与物理量间的定量关系，得到的拟合公式能较好地描述相似材料的性质.     

1151系列式传感器上毛细管的疲劳寿命对比试验

设计了1151系列电容式传感器上非标准件的疲劳寿命对比试验,对铂-铑合金毛细管和铂-铱合金毛细管试件进行对比试验。采用等强度悬臂梁对试件施力,电阻应变片接收施力反馈信号,并采取多项措施提高试验精度。结果表明,铂-铱合金毛细管可以代替铂-铑合金毛细管。     

托卡马克工程试验混合堆等离子体性能的等值线图分析

本文简要叙述托卡马克工程试验混合堆等离子体概念设计的物理基础,对等离子体性能进行了等值线图(Plasma Operation Contour)分析。根据工程试验混合堆的要求,得出一组等离子体参数。     

王阳明“心即理”的思想及其意义

王阳明的“心即理”思想，从本体论的角度来讲主要有两方面，即解说心与物的关系和心与理的关系，亦即“心外无物”、“心外无理”。从认识论的角度看，“心即理”的命题有着不少合理的成分；他的心学对我国近代社会的发展也有很大意义。     

ISLAND—Inverse Square Law Acceleration Measurement Using iNertial Drift

By using a novel free-flying, rotating, optical bench aboard the International Space Station (ISS) as the basis for a measurement of differential acceleration between two gravitating bodies, in principle the Newtonian inverse-square law and the constant of gravitation, G, can be determined at the parts in 10⁶ level.     

声诱饵仿真试验系统

文章介绍了声诱饵仿真试验系统中的有关问题，包括：系统的组成、工作原理、对接装置结构等。建立了对接装置声耦合状态下的数学模型，对近场声压分布进行了仿真计算，得出了匹配材料厚度、发射和接收换能器的选取原则。     

对教考分离工作的思考

教考分离工作是高校考试工作改革的必然趋势。本文从实施教考分离的模式入手,阐述了教考分离模式、完善教考分离的措施、实效及教考分离存在的问题,对当前教考分离工作的实施具有一定的借鉴作用。     

Self-bonding in an amorphous polymer below the glass transition: A T-peel test investigation

Films of amorphous polystyrene (PS) with a weight-average molecular weight (M_w) of 225 × 10³ g/mol were bonded in a T-peel test geometry, and the fracture energy (G) of a PS/PS interface was measured at the ambient temperature as a function of the healing time (t_h) and healing temperature (T_h). G was found to develop with (t_h)^1/2 at T_h = T_g-bulk − 33 °C (where T_g-bulk is the glass-transition temperature of the bulk sample), and log G was found to develop with 1/T_h at T_g-bulk − 43 °C ≤ T_h ≤ T_g-bulk − 23 °C. The smallest measured value of G = 1.4 J/m² was at least one order of magnitude larger than the work of adhesion required to reversibly separate the PS surfaces. These three observations indicated that the development of G at the PS/PS interface in the temperature range investigated (<T_g-bulk) was controlled by the diffusion of chain segments feasible above the glass-transition temperature of the interfacial layer, in agreement with our previous findings for fracture stress development at several polymer/polymer interfaces well below T_g-bulk. Close values of G = 8–9 J/m² were measured for the symmetric interfaces of polydisperse PS [M_w = 225 × 10³, weight-average molecular weight/number-average molecular weight (M_w/M_n) = 3] and monodisperse PS (M_w = 200 × 10³, M_w/M_n = 1.04) after healing at T_h = T_g-bulk − 33 °C for 24 h. This implies that the self-bonding of high-molecular-weight PS at such relatively low temperatures is not governed by polydispersity. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1861–1867, 2004