Electronic and vibrational properties of fluorenone in the channels of zeolite L

Fluorenone (C13H8O) was inserted into the channels of zeolite L by using gas-phase adsorption. The size, structure, and stability of fluorenone are well suited for studying host-guest interactions. The Fourier transform IR, Raman, luminescence, and excitation spectra, in addition to thermal analysis data, of fluorenone in solution and fluorenone/zeolite L are reported. Normal coordinate analysis of fluorenone was performed, based on which IR and Raman bands were assigned, and an experimental force field was determined. The vibrational spectra can be used for nondestructive quantitative analysis by comparing a characteristic dye band with a zeolite band that has been chosen as the internal standard. Molecular orbital calculations were performed to gain a better understanding of the electronic structure of the system and to support the interpretation of the electronic absorption and luminescence spectra. Fluorenone shows unusual luminescence behavior in that it emits from two states. The relative intensity of these two bands depends strongly on the environment and changes unexpectedly in response to temperature. In fluorenone/zeolite L, the intensity of the 300 nm band (lifetime 9 micros) increases with decreasing temperature, while the opposite is true for the 400 nm band (lifetime 115 micros). A model of the host-guest interaction is derived from the experimental results and calculations: the dye molecule sits close to the channel walls with the carbonyl group pointing to an Al3+ site of the zeolite framework. A secondary interaction was observed between the fluorenone's aromatic ring and the zeolite's charge-compensating cations.     

Vibrational spectra of 2-biphenylmethanol. Spectrum simulation and molecular structure

The vibrational spectra of a solid crystalline sample of 2-biphenylmethanol have been measured at room temperature. The IR absorption spectra were recorded in the range 400 cm^–1–3600 cm^–1; Raman spectra were measured in the range 10 cm^–1–1640 cm^–1. The direct mechanical and optoelectronic problems were solved using the fragment method realized as Lev-100 software; the intensity distribution in the IR spectrum of 2-biphenylmethanol was obtained by the same method. The experimental Raman and IR absorption spectra were interpreted by analyzing the calculated data on the frequencies and forms of normal vibrations and their intensities in the IR spectra. IR absorption spectra were simulated for several models of 2-biphenylmethanol conformers that differ in the mutual orientation of fragments. Based on the results of simulation and comparison of the calculated and experimental spectra of conformers we suggested a model for the conformer realized in the solid phase under normal conditions.Original Russian Text Copyright © 2004 by L. M. Babkov, J. Baran, N. A. Davydova, J. I. Kukielskii, and S. V. TrukhachevTranslated from Zhurnal Strukturnoi Khimii, Vol. 45, No. 4, pp. 624–631, July–August, 2004.This revised version was published online in April 2005 with a corrected cover date.     

毛细管气相色谱法快速测定羰基合成脂肪醇中的正构醇

The normal alcohols in fatty alcohols produced from hydroformylation unit were determined directly byOV-1 capillary GC method; This method is simple,rapid and accurate。The relative error is below 2%andcoefficient of variation is below 3%。     

PICVib: An accurate,fast, and simple procedure to investigate selected vibrational modes at high theoretical levels

A new approach Procedure for Investigating Categories of Vibrations (PICVib) for estimating vibrational frequencies of selected modes using only the structure and energy calculations at a more demanding computational level is presented and explored. The PICVib has an excellent performance at only a small fraction of the computational demand required for a complete analytical calculation. The errors are smaller than ca. 0.5% when DFT functionals are combined with high level ab initio methods. The approach is general because it can use any quantum chemical program and electronic structure method. It is very robust because it was validated for a wide range of frequency values (ca. 20–4800 cm^–1) and systems: XH₃ (D_3h) with X = B, Al, Ga, N, P, As, O, S, and Se, YH₄ (D_4h) with Y = C, Si, and Ge, conformers of RDX, S_N2 and E2 reactions, [W(dppe)₂(NNC₅H₁₀)] complex, carbon nanotubes, and hydrogen‐bonded complexes including guanine‐cytosine pair. © 2012 Wiley Periodicals, Inc.     

Simultaneous separation of hydrophobic and polar bases using a silica hydride stationary phase

In this study, the retention behavior of selected hydrophobic and polar bases on a minimally modified silica hydride phase was investigated. From these results and the associated retention plots, significant differences in the chromatographic dependencies of these two classes of basic compounds were evident. The polar bases exhibited strong retention with mobile phases of high organic solvent content, but displayed weak retention with mobile phases of high water content. In contrast, the hydrophobic bases showed “U‐shape” retention dependencies, indicative of the interplay of both RP and normal‐phase retention characteristics. These studies have demonstrated that hydrophobic and polar bases can be simultaneously separated on the same column either under typical RP‐like or aqueous normal‐phase‐like conditions, respectively, with distinctive selectivity. Finally, the effects of temperature on the RP and aqueous normal phase modality of separations with these analytes were investigated, where discrete changes in retention behavior were also observed.     

Separation of 1,3‐dimethylamylamine and other polar compounds in a dietary supplement formulation using aqueous normal phase chromatography with MS

Five ingredients (caffeine, l ‐arginine, creatine, β‐alanine, and 1,3‐dimethylamylamine) from a workout supplement were separated by HPLC with UV detection and LC–MS using an analytical column based on silica hydride operating in aqueous normal phase mode. While RP methods were observed to be inadequate for the analysis due to low retention, aqueous normal phase chromatography was able to readily retain and resolve the analytes. After method development on the HPLC–UV system, the conditions were successfully transferred to an LC–MS system for analysis. Based on calibration curve data, estimates of 63.5, 380.3, and 13.1 mg/serving (5.50 g) were obtained for creatine, l ‐arginine, and 1,3‐dimethylamylamine, respectively. Standard addition data results were compared to those of the calibration curve study, and the two values differed by less than 1% in the case of creatine. The conditions are suitable for further development as a reliable means of quantitating the analytes in workout supplement formulations.     

Analysis of polar peptides using a silica hydride column and high aqueous content mobile phases

The retention behavior of a set of polar peptides separated on a silica hydride stationary phase was examined with a capillary HPLC system coupled to ESI‐MS detection. The mobile phases consisted of formic acid or acetic acid/acetonitrile/water mixtures with the acetonitrile content ranging from 5 to 80% v/v. The effects on peptide retention of these two acidic buffer additives and their concentrations in the mobile phase were systematically investigated. Strong retention of the peptides on the silica hydride phase was observed with relatively high‐organic low‐aqueous mobile phases (i.e. under aqueous normal‐phase conditions). However, when low concentrations of acetic acid were employed as the buffer additive, strong retention of the peptides was also observed even when high aqueous content mobile phases were employed. This unique feature of the stationary phase therefore provides an opportunity for chromatographic analysis of polar peptides with water‐rich eluents, a feature usually not feasible with traditional RP sorbents, and thus under conditions more compatible with analytical green chemistry criteria. In addition, both isocratic and gradient elution procedures can be employed to optimize peptide separations with excellent reproducibility and resolution under these high aqueous mobile phase conditions with this silica hydride stationary phase.     

The relationship between the linear (oscillatory) and nonlinear (steady-state) flow properties of a series of polymer and colloidal systems

The Cox-Merz empirical relationship between the linear (oscillatory) and nonlinear (steady-state) viscosities has been shown to be valid for many polymeric systems. Here, we present an equivalent expression to relate the linear (G) and nonlinear (N ₁) elastic properties of viscoelastic systems. Like the Cox-Merz relationship, it uses a combination of elastic and viscous parameters. The modified form of the storage modulus is then equivalent to the Cox-Merz complex viscosity. It can be used to correlate with (half) the normal force at numerically equal circular frequency and shear rate, respectively.This new expression and the Cox-Merz rule are tested for a range of polymeric and colloidal systems. It is found that both expression work for the polymeric systems considered, but fail for the colloidal systems. In the latter, the steady state values of viscosity and elasticity are consistently low, and replacing them by the complex viscosity and our new elastic expression only makes matters worse.For polymer systems, we suggest this is a general but not universal observation, since we are aware of exceptions to the rule that polymeric systems obey the Cox-Merz rule for viscosity and our rule for elasticity. For colloidal systems we find that neither rule is obeyed for any of our systems.     

Resolution of (+/-)-ibuprofen using (-)-brucine as a chiral selector by thin layer chromatography

The enantiomeric resolution of (+/-)-ibuprofen into its enantiomers was achieved by TLC on silica gel plate using optically pure (-)-brucine as a chiral selector and acetonitrile-methanol (5:1, v/v) as the solvent system. Spots were located in an iodine chamber. The detection limit was 4.9 microg. The effect of concentration of the chiral selector, temperature and pH on resolution has been studied.     

极化效应指数与脂肪酯类化合物沸点的定量构效关系研究

基于烷基极化效应指数(PEI)构建了有效碳原子数(N_Ceff)用于定量表示烷基碳链相对长度. 用最佳子集回归方法建立了脂肪酯沸点与PEI, N_Ceff参数的定量构效关系模型, 该模型对训练集计算值与实验值的相关系数R²为0.9958, 标准偏差s为3.98 K, 对测试集预测值与实验值的相关系数R²分别为: 0.9958, 标准偏差s为3.92 K, 计算结果表明基于参数PEI和N_Ceff所建立的脂肪酯类化合物的沸点定量构效关系模型具有良好的预测能力.