Influence of temperature and alloying elements on the threshold displacement energies in concentrated Ni–Fe–Cr alloys

Concentrated solid-solution alloys(CSAs) have demonstrated promising irradiation resistance depending on their compositions. Under irradiation, various defects can be produced. One of the most important parameters characterizing the defect production and the resulting defect number is the threshold displacement energies(E_d). In this work, we report the results of E_dvalues in a series of Ni–Fe–Cr concentrated solid solution alloys through molecular dynamics(MD)simulations. Based on several different empirical potentials, we show that the differences in the E_dvalues and its angular dependence are mainly due to the stiffness of the potential in the intermediate regime. The influences of different alloying elements and temperatures on E_dvalues in different CSAs are further evaluated by calculating the defect production probabilities. Our results suggest a limited influence of alloying elements and temperature on E_dvalues in concentrated alloys. Finally, we discuss the relationship between the primary damage and E_dvalues in different alloys. Overall, this work presents a thorough study on the E_dvalues in concentrated alloys, including the influence of empirical potentials,their angular dependence, temperature dependence, and effects on primary defect production.     

Hexagonal Si−Ge Class of Semiconducting Alloys Prepared by Using Pressure and Temperature

Multi-anvil and laser-heated diamond anvil methods have been used to subject Ge and Si mixtures to pressures and temperatures of between 12 and 17 GPa and 1500–1800 K, respectively. Synchrotron angle dispersive X-ray diffraction, precession electron diffraction and chemical analysis using electron microscopy, reveal recovery at ambient pressure of hexagonal Ge−Si solid solutions (P6₃/mmc). Taken together, the multi-anvil and diamond anvil results reveal that hexagonal solid solutions can be prepared for all Ge−Si compositions. This hexagonal class of solid solutions constitutes a significant expansion of the bulk Ge−Si solid solution family, and is of interest for optoelectronic applications.     

Surface oxidability of pure liquid metals and alloys

The analysis of the oxygen-liquid metal interaction is a topic of particular technological interest. A deep knowledge of the kinetics and transport mechanisms involved in the oxidation phenomena is necessary: the effect of oxidation reactions taking place in the gas phase and the evaporation of oxides must be considered.This paper aims to review our works in order to provide a systematic analysis of the oxidation of pure metals and determine the most likely to keeping oxygen-free the surface in a binary alloy.In addition, the upgrading of this theoretical approach, here briefly described, is addressed to give a contribution to a better understanding of the evolution of oxidation phenomena close to the solid-liquid-gas interfaces.     

Birefringence control by hydrogen bonding on compatible polymer pair composed of hydrogenated ring‐opening polymer and modified polystyrene

A new polymer blend composed of a hydrogenated ring‐opening polymer (HROP) with an ester group and hydroxyl functionalized polystyrene (HFP) produced the excellent transparent materials which enabled a precise birefringence control in keeping with the other physical properties for optical film use. The blend with a composition from 0.28 to 0.35 for the HFP weight fraction showed an extraordinary wavelength dispersion, transmitting through a zero birefringence point at the critical fraction of 0.45, while each polymer showed an ordinary wavelength dispersion. The observed excellent transparency even above those of the glass transition temperature was attributed to a depressed phase separation that resulted from strong hydrogen bond between the ester and hydroxyl groups. An IR analysis of the film demonstrated a remarkable red‐shift in the carbonyl peak with an increase of the hydroxylated polystyrene content, indicating a strong hydrogen bond between those groups. This new polymer blend provides a useful design to achieve practical demands for film use, both optical and mechanical under the fabrication conditions using the melt extrusion technique. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3132–3143     

Studies on induction hardening of powder-metallurgy-processed Fe-Cr/Mo alloys

Induction hardening of dense Fe-Cr/Mo alloys processed via the powder-metallurgy route was studied. The Fe-3Cr-0.5Mo, Fe-1.5Cr-0.2Mo, and Fe-0.85Mo pre-alloyed powders were mixed with 0.4wt%, 0.6wt%, and 0.8wt% C and compacted at 500, 600, and 700 MPa, respectively. The compacts were sintered at 1473 K for 1 h and then cooled at 6 K/min. Ferrite with pearlite was mostly observed in the sintered alloys with 0.4wt% C, whereas a carbide network was also present in the alloys with 0.8wt% C. Graphite at prior particle boundaries led to deterioration of the mechanical properties of alloys with 0.8wt% C, whereas no significant induction hardening was achieved in alloys with 0.4wt% C. Among the investigated samples, alloys with 0.6wt% C exhibited the highest strength and ductility and were found to be suitable for induction hardening. The hardening was carried out at a frequency of 2.0 kHz for 2-3 s. A case depth of 2.5 mm was achieved while maintaining the bulk (interior) hardness of approximately HV 230. A martensitic structure was observed on the outer periphery of the samples. The hardness varied from HV 600 to HV 375 from the sample surface to the interior of the case hardened region. The best combination of properties and hardening depth was achieved in case of the Fe-1.5Cr-0.2Mo alloy with 0.6wt% C.     

Die Isolierung radioaktiv markierter nichtmetallischer Einschlüsse aus Hochlegierten Stählen

Zur Isolierung von Einshlüssen aus hochlegierten Stählen werden die Hauptkomponenten Fe, Ni, Cr und weitere Metalle durch mehrstufig ausgeführte Flüssig-Flüssig-Extraktionen mit verschiedenen Extraktionsmitteln abgetrennt. Die im Eindampfrückstand der wäβrigen Phase nach der Extraktion verbleibenden Einschlüsse können für die meisten Radionuklide ohne nennenswerte Selbstabsorption mit einem Groβflächenzählrohr oder anderen geeignetenZählvorrichtungen ausgemessen werden.     

Anomalous electronic transport in quasicrystals and related complex metallic alloys

We analyse the transport properties in approximants of quasicrystals α-AlMnSi, 1/1-AlCuFe and for the complex metallic phase λ-AlMn. These phases present strong analogies in their local atomic structures and are related to existing quasicrystalline phases. Experimentally, they present unusual transport properties with low conductivities and a mix of metallic-like and insulating-like characteristics. We compute the band structure and the quantum diffusion in the perfect structure without disorder and introduce simple approximations that allow us to treat the effect of disorder. Our results demonstrate that the standard Bloch–Boltzmann theory is not applicable to these intermetallic phases. Indeed their dispersion relations are flat, indicating small band velocities, and corrections to quantum diffusion, which are not taken into account in the semi-classical Bloch–Boltzmann scheme, become dominant. We call this regime the small velocity regime. A simple relaxation time approximation to treat the effect of disorder allows us to reproduce the main experimental facts on conductivity qualitatively and even quantitatively.     

Evolution of long-period stacking order (LPSO) in Mg97Zn1Gd2 cast alloys viewed by HAADF-STEM multi-scale electron tomography

We have studied three-dimensional (3D) structures and growth processes of 14H-type long-period stacking order (LPSO) formed in Mg₉₇Zn₁Gd₂ cast alloys by single tilt-axis electron tomography (ET) using high-angle annular dark-field scanning transmission electron microscopy. Evolution of the solute-enriched stacking faults (SFs) and the 14H LPSO by ageing were visualised in 3D with a high spatial resolution in multi-scale fields of views from a few nanometres to ~10 μm. Lateral growth of the solute-enriched SFs and the LPSO in the (0?0?0?1)_Mg plane is notable compared to the out-of-plane growth in the [0?0?0?1]_Mg direction. The 14H LPSO grows at the cost of decomposition of the (Mg, Zn)₃Gd-type precipitates, and accompany a change of in-plane edge angles from 30 to 60°. We have updated the Time–Temperature–Transformation diagram for precipitation in Mg₉₇Zn₁Gd₂ alloys: starting temperatures of both solute-enriched SFs and LPSO formation shifted to a shorter time side than those in the previous diagram.     

Enhanced Dual Fuel Cell Electrocatalysis with Trimetallic PtPdCo Mesoporous Nanoparticles

The facile preparation of platinum‐based catalysts with designed compositions and structures is of great importance for fuel cells. In this work, a one‐pot method is developed to synthesize monodispersed trimetallic PtPdCo mesoporous nanoparticles (PtPdCo MNs) with uniform morphology and size. The proposed synthetic method does not require any hard template or organic solvent, which greatly simplifies the preparation procedure. PtPdCo MNs, with a highly porous structure, exhibit enhanced electrocatalytic activities and excellent stabilities for both the formic acid oxidation reaction and the oxygen reduction reaction, relative to bimetallic PtPd MNs and commercial Pt/C catalyst. The proposed synthetic method is highly valuable for the design of mesoporous multimetallic catalysts for fuel cells.