Chelate polymers: II. Some novel transition metals complexes with azomethine‐containing siloxanes and their polyesters

New Schiff bases of 2,4‐dihydroxybenzaldehyde with siloxane‐α,ω‐diamines having different numbers of siloxane units in the chain have been synthesized and characterized by spectroscopy, elemental and thermal analyses. These azomethines were found to form complexes readily with copper(II), nickel(II), cobalt(II), cadmium(II) and zinc(II). From IR and UV–Vis studies, the phenolic oxygen and imine nitrogen of the ligand were found to be the coordination sites. Thermogravimetric analysis (TGA) data indicate the chelates to be more stable than the corresponding ligands. The melting points increase with shortening of the siloxane segment from azomethine, as well as the result of complexation. The chelates obtained were covalently inserted in polymeric linear structures by polycondensation through the OH‐difunctionalized ligand with 1,3‐bis(carboxypropyl)tetramethyldisiloxane. Direct polycondensation, assisted either by acetic anhydride or N,N′‐dicyclohexylcarbodiimide as dehydrating agent and the complex 4‐(dimethylamino)pyridinium 4‐toluenesulfonate as catalyst, was used for the synthesis of these compound types. The structures of the polymers obtained were confirmed by IR, UV and ¹H NMR. Characterization was undertaken by TGA, solubility tests and viscosity measurements. Copyright © 2003 John Wiley & Sons, Ltd.     

OXIDATION OF TiAl,Ni AND Fe IN A DYNAMIC ENVIRONMENTAL SEM

IntroductionInmaterialscience,differentmicrostructuresofthesamematerialsmayinducediversebehaviorsanddifferentcharacteristics.Westwood(1988)showed,asanexample,thatthetreatmentofaluminumsurfacewithcommercialphosphoricacidproducedmechanicallyinterlockedoxide搘hiskers?approximately10nmindiameterand400nminlength,whichmechanicallyinterlocked.Thismicro-structurecankeepsuchaconglomeratebondedoverconsiderablerangesofstressandtemperature.Inahumidatmosphere,especiallythatcontainingchlorine,however,suchox…     

Ab initio study of sodium intercalation into metal oxides

Using the full-potential linearized augmented plane wave (FP-LAPW) method, we have studied the effect of chemistry on the average intercalation voltage (AIV) caused by the Na ions intercalating into transition metal oxides. The effect of transition metal was systematically studied by varying M=Co, Ni and Mn in NaMO₂ and fixing the α-NaFeO₂ layered structure. The effect of the guest atoms into the host material is discussed in terms of the structural and electronic properties. Comparatively to Li intercalation, a significant electron transfer towards transition metal was found. This observation suggests that the transition metal contribute to the AIV determination and confirms the common assumption that intercalated electron reduces M⁴⁺ to M³⁺.     

Nanostructured polymetallaynes of controlled length: Synthesis and characterization of oligomers and polymers from 1,1′‐bis‐(ethynyl)4,4′‐biphenyl bridging Pt(II) or Pd(II) centers

The reactivity of square planar palladium(II) and platinum(II) complexes in trans or cis configuration, namely trans or cis‐[dichlorobis(tributylphosphine)platinum(II)] and trans‐[dichlorobis(tributylphosphine)palladium(II)] with 1,1′‐bis(ethynyl) 4,4′‐biphenyl, DEBP, leading to π‐conjugated organometallic oligomeric and polymeric metallaynes, was investigated by a systematic variation of the reaction conditions. The formation of polymers and oligomers with defined chain length [? M(PBu₃)₂ (C?C? C₆H₄? C₆H₄? C?C? )]_n (n = 3–10 for the oligomers, n = 20–50 for the polymers) depends on the configuration of the precursor Pt(II) and Pd(II) complexes, the presence/absence of the catalyst CuI, and the reaction time. A series of model reactions monitored by XPS, GPC, and NMR ³¹P spectroscopy showed the route to modulate the chain growth. As expected, the nature of the transition metal (Pt or Pd) and the molecular weight of the polymers markedly influence the photophysical characteristics of the polymetallaynes, such as optical absorption and emission behavior. Polymetallaynes with nanostructured morphology could be obtained by a simple casting procedure of polymer solutions. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3311–3329, 2007     

过渡金属催化的1,6-烯炔环异构化反应

1,6-烯炔底物在过渡金属催化剂作用下的化学行为得到了广泛的研究,重点是关于过渡金属催化的1,6-烯炔环异构化反应.从反应机理角度入手,把1,6-烯炔环异构化反应按启动方式总结为三类,并对这三种方式启动的1,6-烯炔环异构化反应进行了详细地总结和阐述.     

Heavy metal ion uptake properties of polystyrene-supported chelating polymer resins

Metal ion uptake properties of polystyrene-supported chelating polymer resins functionalized with (i) glycine, (ii) hydroxy benzoic acid, (iii) Schiff base and (iv) diethanol amine have been investigated. The effects of pH, time and initial concentration on the uptake of metal ions have been studied. The uptake of metal ion depends on pH. The resins are more selective at pH 10 for Pb(II) and Hg(II), whereas at pH 6 they are found to be Cd(II) and Cr(VI) selective. Metal ion uptake properties of resins follow Freundlich’s equation. The resins are recyclable and are therefore employed for the removal of heavy metal pollutants from industrial waste water.     

Microchemical Investigation of Archaeological Copper Based Artefacts Disclosing an Ancient Witness of the Transition from the Value of the Substance to the Value of the Appearance

In many Italian archaeological sites dated between the sixth and third centuries BC, unworked lumps of Cu-based materials are sometimes found, the so called Aes Rude, which according to archaeological considerations were appreciated as currency, as a medium of exchange and as a form of saving. The microchemical investigation of these ancient artefacts discloses their nature as apparently not usable for any functional applications or possible use. Indeed, Aes Rude resemble ordinary copper material, but microchemical results indicate that they are constituted by highly ferruginous leaded copper, making them useless for producing other metal objects by means of casting or hot and cold working. Notwithstanding this intrinsic negative feature, the production of these intractable Cu-based alloys was deliberately carried out to maximise the process yield in terms of produced metal from an impure and unselected metal ore by tailoring the smelting process parameters. With these considerations in mind, the microchemical investigation of these ancient iron–copper alloys gives evidence of the passage from the acceptance of an artefact value based on its true nature or potential use to the acceptance of the value based only on its appearance or form irrespective of its present or future use. This information could contribute to a better understanding of the evolution of human thought and economic and social interactions.     

超塑性板材气压成形模具的设计与计算

介绍了金属的“超塑性”概念及其特点,阐述了超塑性材料Zn-22%Al板材气压成形的原理,着重解释了其板材气压成形模具的设计与计算,对生产实际与理论探讨具有现实意义。     

Applications of Transition Metals in Organic Synthesis and Polymerization

1 Results Classic oxidants require rigorous control of the experimental conditions added with the problem of lack of selectivity. Catalysis by transition metals with environmentally safe oxidants provides synthetic routes to minimize pollution by giving environmental benign by-products. Fe (Ⅵ) is a powerful and a selective oxidant with Fe(Ⅲ) as a by-product, while hydrogen peroxide is clean with water as the only by-product. Separation of sodium or potassium ferrates requires tedious processes. Associat...     

双金属氰化络合物催化剂的形态及其对催化剂活性的影响

合成了多个基于钴氰化锌的双金属氰化络合物(DMC)催化剂,并对催化剂的结晶形态进行了表征.考察了制备过程中,有机配体及其引入方式,温度,搅拌速度对DMC催化剂形态的影响.其中有机配体对DMC催化剂形态的影响是最主要的.有机配体中富电子原子的电负性的强弱和数量共同影响着DMC催化剂的形态.该类原子的电负性越强,得到的DMC催化剂的结晶性越差,无定型部分的比例越高,并且单个原子的电负性强弱比该类原子的数量在此间的影响更大.而在有机配体预先存在的情况下,该沉淀体系则更有利于无定型部分的产生.在30℃左右的沉淀反应温度下,得到的DMC催化剂的无定型部分比例最高.在有机配体存在的情况下,搅拌速度对DMC催化剂形态的影响有限.并且发现存在于有机配体中的DMC催化剂随着时间的推移,形态会发生变化.初步揭示了DMC催化剂的形态与其催化活性间的关系.而无定型态的DMC催化剂更有利于PO的聚合.