不同形貌氧化锌纳米棒的CVD法制备及生长机制讨论

采用CVD技术制备了不同形貌的ZnO纳米棒.并利用XRD、SEM、能谱仪、荧光光谱仪对比研究了其表面结构、成份、相结构及光致发光特性.结果表明,样品形貌随着沉积位置的变化而变化,其生长遵循金属自催化机制.并且表明离子化氧空位的存在有利于ZnO的绿光发射.     

过渡金属羰基化合物Mn(CO)5Br和Re(CO)5Br结构与动力学的超快光谱

利用超快泵浦探测红外光谱、稳态线性红外光谱和计算化学方法,对过渡金属羰基化合物Mn(CO)₅Br和Re(CO)₅Br的振动和结构动力学进行了研究. 借助羰基的两个伸缩振动峰(处于低频的A₁模式和处于高频的简并E模式)进行了观测. 结果表明,在两个配合物中,A₁和E模式振动峰的振动频率位置及频率差都与中心金属原子对羰基的键级和振动力常数的影响相关. 而A₁模式比E模式的线宽宽一些,部分由于振动寿命的影响. 此外,从瞬态光谱中获得了振动模式依赖的对角非谐性常数,发现在两个羰基化合物中E模式的非谐性总是较小.     

过渡金属Co2+离子掺杂ZnS硫化物纳米晶制备与中红外发光特性研究

利用不含有机相的简单水热法制备了Co^2+∶ZnS纳米晶,纳米晶具有立方闪锌矿结构,平均晶粒尺寸约为8.3 nm,在808 nm激光泵浦下具有2~5μm波段的中红外荧光发射,中心波长位于3400 nm和4700 nm,分别对应Co^2+离子的4T2(F)→4 A 1(F)和4T1(F)→4T2(F)的能级跃迁.进一步将制备的纳米晶在还原气氛下进行800℃热处理,获得立方闪锌矿和纤锌矿混合晶型的纳米晶,平均晶粒尺寸增大到22.5 nm左右,热处理后的纳米晶表面羟基含量更低,中红外荧光发射强度显著提高.该Co^2+∶ZnS纳米晶的制备方法简单、在制备过程中不引入有机相等荧光淬灭中心,同时证明通过后热处理过程可以进一步减少表面缺陷及羟基含量,使荧光强度得到大幅提升.     

修正的Thomas-Fermi模型及惰性气体原子抗磁磁化率的计算（Ⅰ）

 在本文中，我们在Thomas-Fermi（TF）及Thomas-Fermi-Amadi（TFA）模型下，选用Jensen的试验密度函数，在考虑到TF模型所确定的密度渐近行为情况下，计算了惰性气体原子Ne、Ar、Kr、Xe、Rn的抗磁磁化率。计算表明，考虑密度渐近行为式是必要的，并给出了较以往的同类计算更好的结果。     

Laser control of magneto-polaron in transition metal dichalcogenides triangular quantum well

We study the dynamic of magneto-polaron condensate in monolayer two dimensional (2D) transition metal dichalcogenides (TMDs) materials of 2H types in triangular quantum well potential. Within both the quantum mechanical Schrödinger approach (QMSA) and the improved Wigner-Brillouin theory (IWBT), Landau energies levels (LELs) are derived. We have shown that the magneto-polaron condensation is enhanced in monolayer MoSe₂ compared to MoS₂, WS₂ and WSe₂. We derive various levels by increasing a magnetic field and laser parameter. We show that the quantum confinement lifts the degeneracy of the Landau levels (LLs) resulting in an anticrossing and crossing. The dephasing effect due to the quantum well potential's parameter plays an important role in the magneto-polaron energy corrections, which are also affected by the amplitude of the laser field. The system presents Stückelberg oscillations which is important for practical applications.     

A Shell-by-Shell Approach for Synthesis of Mesoporous Multi-Shelled Hollow MOFs for Catalytic Applications

Over the past two decades, advanced materials with hollow interiors have received significant attention in materials research owing to their great application potential across a vast number of technological fields. Though with great difficulty, multi-shelled hollow metal–organic frameworks (MSHMs) have also been successfully synthesized in recent years. Herein, a rational shell-by-shell soft-templating protocol has been devised to fabricate highly uniform multi-shelled hollow cobalt-imidazole-based MOF (ZIF-67). For the first time, it has become possible to endow mesoporosity to this new type of functional material (i.e., mesoporous MOFs). When used as carrier materials in catalytic reactions, in principle, these mesoporous MSHMs with high surface area not only improve the dispersity of metal nanoparticles (NPs), but also efficiently facilitate the mass diffusion of the reactions, resulting in enhanced catalyst activity. Moreover, the obtained MSHMs/M nanocomposites serve as base-metal bifunctional catalysts for one-pot oxidation-Knoevenagel condensation cascade reaction, in which the MSHMs itself serves as a pristine active catalyst in addition to its role of catalyst support. The results demonstrate that excellent multifunctional catalysts can be achieved via preparing intrinsically microporous bulk MOFs into extrinsically mesoporous MSHMs which possess many structural merits that conventional bulk MOFs do not have.     

Kinetic study of BH3 reduction of benzaldehydes: identification of effective reducing species

A kinetic study was carried out for the reaction of benzaldehyde and borane (BH₃) in tetrahydrofuran. The effect of BH₃ concentration on the rate constant showed that the reaction order with respect to BH₃ was 1.6. Substituent effects gave a linear Hammett plot with a ρ value of ?0.51. It was concluded that the reaction proceeds through a rate‐determining hydride‐transfer transition state with two BH₃ molecules, in which one molecule of BH₃ acts as a reducing agent and the other serves as a catalyst. Copyright © 2011 John Wiley & Sons, Ltd.     

A 57Fe Mössbauer characterization of Fe-biopolymer complexes and their relevance to biological molecules

⁵⁷Fe Mössbauer spectroscopy is used to study the interactions, geometry, and the coordination characteristics of the Fe-complexes of biopolymers such as chitosan, glucosamine, and chondritin sulfate. In addition, a computational effort is undertaken for predicting the geometries and energies of the metal complexes by the Density Functional Theory (DFT) methods as implemented in the Gaussian 2003 quantum mechanical program. Both experimental and computational results suggest that the structure of the metal complexes resemble closely the structure of the active sites of metalloenzymes in 2+ or 3+ oxidation states and is at least tetracoordinated and can possibly have six ligands.     

Fourier Transform Infrared and Raman Spectra of Metal Halide Complexes of 3,5-Lutedine in Relation to Their Structures

Abstract

Fourier transform infrared (4000-200 cm¹) and Raman (3500-50 cm^?1) spectra are reported for metal(II) halide 3,5-lutidine (3,5-dimethylpyridine) complexes of the following stoichiometries: M(3,5L)₄X₂ M=Co or Ni, X=C1 or Br; M=Mn or Cu, X=Br; M=Cd, X=I; M(3,5L)₃X₂ M=Fe, X=C1; M=Cu, X=Br; Hg(3,5L) X₂ X=C1 or Br.

Vibrational assignments are given for all the observed bands. Some structure- spectra correlations are found. For a given series of isomorphous complexes the sum of the difference between the liquid and ligand values of the vibrational modes of 3,5-lutidine is found to increase in the order of the second ionization potentials of the metals. The frequency shifts are also found to depend on the halogen.