Quo Vadis total reflection X-ray fluorescence?

The multielement trace analytical method ‘total reflection X-ray fluorescence’ (TXRF) has become a successfully established method in the semiconductor industry, particularly, in the ultra trace element analysis of silicon wafer surfaces. TXRF applications can fulfill general industrial requirements on daily routine of monitoring wafer cleanliness up to 300 mm diameter under cleanroom conditions. Nowadays, TXRF and hyphenated TXRF methods such as ‘vapor phase decomposition (VPD)-TXRF’, i.e. TXRF with a preceding surface and acid digestion and preconcentration procedure, are automated routine techniques (‘wafer surface preparation system’, WSPS). A linear range from 10⁸ to 10¹⁴ [atoms/cm²] for some elements is regularly controlled. Instrument uptime is higher than 90%. The method is not tedious and can automatically be operated for 24 h/7 days. Elements such as S, Cl, K, Ca, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, As, Br, Sn, Sb, Ba and Pb are included in the software for standard peak search. The detection limits of recovered elements are between 1×10¹¹ and 1×10⁷ [atoms/cm²] depending upon X-ray excitation energy and the element of interest. For the determination of low Z elements, i.e. Na, Al and Mg, TXRF has also been extended but its implementation for routine analysis needs further research. At present, VPD-TXRF determination of light elements is viable in a range of 10⁹ [atoms/cm²]. Novel detectors such as silicon drift detectors (SDD) with an active area of 5 mm², 10 mm² or 20 mm², respectively, and multi-array detectors forming up to 70 mm² are commercially available. The first SDD with 100 mm² (!) area and integrated backside FET is working under laboratory conditions. Applications of and comparison with ICP-MS, HR-ICP-MS and SR-TXRF, an extension of TXRF capabilities with an extremely powerful energy source, are also reported.     

聚合物{[CuII(Hpb) (mal)]H2O}n :单体的量子化学计算和磁性研究

{[Cu^Ⅱ（Hpb）（mal）]H=O}n （Hpb=2-2＇-pyridylbenzimidazole, mal=maleic acid） is a helical chain-like polymer complex. In order to investigate the electronic structure of the complex, the monomer Cu^Ⅱ（Hpb）（mal） was obturated with different functional groups respectively. For these selective segments, the geometry optimizations were conducted by using hybrid DFT （B3LYP）methods to find that the structure obturated with H2O was better consistent with the experiment, and then this model would be used to latter calculations, such as the frontier molecular orbital and the NBO charge population analysis. In addition the magnetic behaviors of this complex were analyzed by experiments and the weak antiferromagnetic couple between copper（Ⅱ） ions was observed. The exchange coupling constant was calculated by DFT based on the spin broken symmetry formalism. The calculated coupling constants were in good agreement with the experimental data.     

Synthesis of the marine furanoditerpene (−)-marginatone

A synthesis of the marine labdane furanoditerpene (−)-marginatone 1 has been accomplished by a short sequence of reactions starting from (+)-coronarin E 5. The key step is the stereocontrolled-intramolecular electrophilic cyclisation of the (+)-dihydrocoronarin E 6, to the tetracyclic marginatane skeleton 7, which is subsequently functionalized by allylic oxidation to give 1. As (+)-coronarin E 5 was previously synthesized from (−)-sclareol 10, the herein reported preparation constitutes the first formal total synthesis of (−)-marginatone 1, by which its absolute configuration has been confirmed.     

Photocrosslinking of functionalized rubber. II. Photoinitiated cationic polymerization of epoxidized liquid natural rubber

Low molecular weight epoxidized natural rubber has been crosslinked within seconds by UV irradiation in the presence of a triarylsulfonium salt. The photoinitiated cationic ring-opening polymerization was studied quantitatively by infrared spectroscopy and shown to proceed with surprisingly long kinetic chains in such solid medium. The high conversion (60%) needed for complete insolubilization, together with the presence of tetrahydrofuran structures, argue in favor of an intramolecular polymerization process involving neighboring epoxy groups. The photoinitiator concentration has a strong influence on the rate and extent of the reaction, as well as on the depth of cure profile. Because of an efficient dark process, close to 100% conversion was reached upon storage of the irradiated elastomer at ambient, with a concomitant increase of the gel fraction and the polymer hardness. The grafting of pendent acrylate groups onto the polymer chain leads to a three-fold decrease of the initial rate of polymerization of the epoxide. The photocuring of natural rubber bearing both epoxy and acrylate groups generates a dual polymer network which combines the properties of the two moieties. © 1995 John Wiley & Sons, Inc.     

Model prediction of batch emulsion copolymerization as a function of conversion: A sensitivity analysis

Recently a model has been developed capable of predicting absolute monomer concentrations and their ratios in the polymer, aqueous, and monomer droplet phases as a function of conversion in batch emulsion copolymerizations without using any adjustable parameters. In this article the sensitivity of model predictions of composition drift toward deviations of 10% in all model parameters (maximum swellabilities of monomer in the polymer phase, water solubilities, reactivity ratios, and monomer and polymer densities) was estimated using the monomer combination methyl methacrylate-styrene as an example. From the sensitivity analysis it can be concluded that the reactivity ratios are the most important parameters affecting composition drift. The effects of deviations in maximum swellabilities and monomer and polymer densities on composition drift can be neglected, while the water solubility is important only in those cases where the amount of monomer in the aqueous phase cannot be neglected as compared with the total monomer amount. © 1994 John Wiley & Sons, Inc.     

A facile synthesis of (6S,1′S)-(+)-hernandulcin and (6S,1′R)-(+)-epihernandulcin

A facile total synthesis of (+)-hernandulcin (1) was accomplished from (−)-isopulegol in 6 steps with 15% overall yield. Epoxidation of (−)-isopulegol with m-chloroperbenzoic acid followed by opening of the epoxide 3a with prenyl Grignard afforded the tertiary alcohol 4a with correct C-6 and C-1′ stereochemistry as a major product. Oxidation of the secondary alcohol in compound 4a to the ketone 5a was accomplished in high yield by using TPAP and N-methylmorpholine N-oxide. Conversion of the ketone 5a to α,β-unsaturated ketone via organoselenium intermediate gave (+)-hernandulcin (1). This method was also successfully applied to the synthesis of (+)-epihernandulcin (2).     

CAST/CNMR: highly accurate C NMR chemical shift prediction system considering stereochemistry

Accurate, practical prediction of ¹³C NMR chemical shifts has been achieved with a new system, CAST/CNMR, taking account of stereochemistry. The CAST/CNMR system has solved the critical problem of the accurate distinction of differences and similarities in stereochemical structures around a specific carbon, which has not yet been achieved by any other database-oriented system for prediction of ¹³C NMR chemical shifts. CAST/CNMR uses a three-dimensional structural database together with a ¹³C NMR spectral database. Absolute/relative configurational and conformational structural information are described by the CAST (CAnonical-representation of STereochemistry) coding method. This paper provides an overview of the CAST/CNMR system, and describes its application to two natural products as examples.