Volatilization of trichothecene mycotoxins for analysis

T-2 toxin and diacetoxyscirpenol (DAS), two trichothecene mycotoxins containing one hydroxy group, have been volatilized by induction heating, revolatilized, and analyzed by gas chromatography (GC) and/or GC mass spectroscopy. Seventy to eighty percent of DAS was recovered by this system; 60–70% T-2 toxin was recovered. When the hydroxy group is derivatized by acetate, 90–100% recovery is obtained. Other trichothecenes of the macrocyclic ester type (e.g., Roridan A) were also tried. Ten to twenty percent of the macrocyclic ester was obtained without derivatization.     

Crystal and molecular structure, and P N.M.R. characteristics of di-μ-chlorodi(propionyl)bis(dimethylphenylphosphine)diplatinum(III). Trans-influence of ligands in binuclear complexes

The known complex, $\text{trans}$-(η-C₅H₅)₂Rh₂(CO)₂(CF₃C₂CF₃) is formed in high yield from (η-C₅H₅)Rh(CO)₂ and CF₃FCCF₃ at 100°. The less stable $\text{cis}$-isomer of the complex is obtained in low yield from the same reaction. The infrared, ¹H, ¹⁹F and ¹³C NMR spectra of the two isomers are compared. The $\text{trans}$-isomer undergoes CO scrambling in solution at room temperature, and the variable temperature ¹³C NMR spectra are consistent with a pairwise bridge opening and closing mechanism. The mechanism is extended to account for the isomerization of $\text{cis}$ to $\text{trans}$ isomer, whihc has a half-life of 12 h at room temperature. The ¹³C spectrum indicates that the $\text{cis}$-isomer is static in solution at room temperature. The $\text{trans}$-isomer is reversibly protonated by protonic acids, and BF₄^? and PF₆^? salts of the protonated species can be isolated. The spectroscopic properties of these salts are consistent with protonation at one of the alkynyl-carbons, but it is not possible to distinguish between two alternative structures for the complex cation.Treatment of (η-C₅H₅)₂Rh₂(CO)₂(CF₃C₂CF₃) with (η-C₅H₅)Rh(CO)₂ gives the trinuclear complex (η-C₅H₅)₃Rh₃(CO)(CF₃C₂CF₃) in 80% yield. The analogoug but-2-yne complex is formed from (η-C₅H₅)₃Rh₃(CO)₃ and MeCCMe. The infrared, ¹H, ¹⁹F and ¹³C NMR spectra indicate that the hexafluorobut-2-yne complex exists in two different structural arrangements in solution. One has an edge bridging, and the other a face bridging carbonyl. The proportion of the isomers is affected by the solvent polarity. The spectra of the but-2-yne complex indicate it is fluxional at room temperature, and has a face bridging structure in solution regardless of the polarity of the solvent. Reversible protonation of the hexafluorobut-2-yne complex occurs in protonic acids, and the salt [(η-C₅H₅)₃Rh₃(CO)(CF₃C₂CF₃)H]⁺[BF₄]^?,H₂O can be isolated. The spectroscopic properties of this complex are consistent with a structure incorporating an edge-bridging carbonyl, and probably, an edge-bridging hydride ligand.     

Anodic stripping voltammetry in a flow-through cell with a fixed mercury film glassy carbon disc electrode. Part I

Anodic stripping voltammetry at a glassy carbon disc electrode covered by a thin mercury film was adapted for use in a flow-through cell. The resulting system is characterized by extreme simplicity of set-up and operation, high sensitivity and excellent precision and stability. Its performance was tested via the determination of hydrated or labile complex ions of heavy metal ions in sea water, using short (2–10 min) deposition periods. The dependence of the stripping peak charge on metal ion concentration, length of deposition period, solution flow rate and other variables was examined and the reliability of the results obtained were evaluated under conditions resembling continuous monitoring.     

Products of the reaction of H2Os3(CO)10 with cyclonona-1,2diene

Treatment of H₂Os₃(CO)₁₀ with cyclonona-l,2-diene produced HOs₃(CO)₉C₉H₁₃ and Os₂(CO)₆(C₉H₄)₂. Single crystal X ray analysis has shown that the latter is not isostructural with Fe₂(CO)₆(C₉H₁₄)₂.     

Solvolytic behaviour and the solubilities of various inorganic compounds, lewis acids and bases in fused monobromo acetic acid solvent system—II

Solubilities and the solvolytic behaviour of various inorganic compounds, Lewis acids and bases in fused monobromoacetic acid at 60 ± 0.5°C are discussed. Ionic compounds are fairly soluble, iodides and thiocyanates being comparatively more soluble than chlorides and bromides. Tetraalkyl ammonium halides are highly soluble in this solvent. Conductometric and spectroscopic studies of various Lewis acids and bases in fused monobromoacetic acid indicate their solvolytic behaviour and their subsequent ionization. The solvolyses products BBr₃·CH₂BrCOOH and SbCl₅·CH₂BrCOOH have been observed to be the strongest Bronsted acids. Auto-ionization of this solvent has been supported by acid/base titrations.     

Experimental evidence for the existence of a Ramsauer—Townsend minimum in liquid CH4 and liquid Ar (Kr and Xe)

Experimental evidence for the existence of a Ramsauer—Townsend minimum in the electron scattering cross section for liquid CH₄ and liquid Ar (Kr and Xe) is provided from: (i) comparisons of thermal electron mobilities in gases with those in liquids, (ii) changes in the electron mobility with gas density, and (iii) the dependence of the electron mobility on temperature for liquids whose V₀, the energy of the electron state in the liquid, is ? 0 eV.     

Crystal growth and electrical properties of lithium,rubidium, and cesium molybdenum oxide bronzes

Crystals of Li_0.33 MoO₃ (blue), Rb_0.23MoO₃ (blue) and Cs_0.31MoO₃ (red) were grown by electrolysis from MoO₃M₂MoO₄ melts (M =alkali metal) with composition 70–77 mole% MoO₃. Melts richer in M₂MoO₄ produced MoO₂ only. Correlation is made between bronze formation and the coordination of Mo in the melt and in the equilibrium solid phase M₂Mo₄O₁₃. Li_0.33MoO₃ and Cs_0.31MoO₃ are semiconductors with high-temperature-range activation energies 0.16 and 0.12 eV. Rb_0.23MoO₃ has an electrical behavior similar to that of blue K_xMoO₃ with a semiconductor-metal transition at (170 ± 5) K. ESR spectra observed in Li_0.33MoO₃ and Rb_0.23MoO₃ single crystals at 4.2 K show extensive delocalization of the 4d¹ electron associated with Mo(V) centers. Attempts to grow molybdenum bronzes containing Ca or Y were unsuccessful.     

The crystal structure of hydrogen cerium(III) sulfate hydrate, [H3O][Ce(SO4)2] · H2O

[H₃O][Ce(SO₄)₂] · H₂O crystallizes in the monoclinic system with unit-cell dimensions (from single-crystal data) a = 9.359(4), b = 9.926(4), c = 8.444(3) Å, β = 96.53(9)° and space group P2₁/n, z = 4. The structure was solved by conventional heavy-atom methods using 1787 counter-measured reflections (MoKα radiation), and refined using full-matrix least-squares techniques to an R of 0.0465 (ωR = 0.0413). The structure consists of cerium(III) ions in irregular nine-coordination to oxygen atoms from two bidentate sulfate ions, four monodentate sulfate oxygen atoms, and one water molecule. The oxonium ions are present as isolated ions in the structure and take par in the hydrogen bonding network. The Ce-O bond lengths range from 2.454(7) to 2.626(6) Å.     

Ionic conductivity of Li2MgSn3O8 ramsdellite

The ionic conductivity of polycrystalline pellets of Li₂MgSn₃O₈ with ramsdellite-type structure was measured by complex impedance technique. The conductivity is 1.2 × 10^?8 (Ω cm)^?1 at 300°C and 2.3 × 10^?4 (Ω cm)^?1 at 450°C. The results are discussed in relation to structural properties.     

Acidic and reductive dissolution of magnetite in aqueous sulfuric acid: Site-binding model and experimental results

The open circuit dissolution of ionic metal oxides in mineral acids is modelled assuming that the rate is controlled by the transfer of metal ions in hydrolytic equilibrium with bulk metal ions, from the metal oxide surface to the Stern plane. The site-binding model of the double layer metal oxide/electrolyte solution is used to obtain the pH dependence of surface and Stern potentials. The nature of the active sites is discussed and their surface concentration is assumed to be proportional to suface charge σ₀. Again, the site-binding model is used to detemine the pH dependence of σ₀. It is thus shown that the rate order in c_H⁺ is essentially defined by the potential dependence of the charge transfer process, for oxides with points of zero charge near neutrality that dissolve in mildly or strongly acidic solutions. The role of surface complexation is also discussed in terms of the site-binding model and the difficulties in interpreting dissolution experiments under constant external applied potential are discussed in terms of the complexity of the semiconductor oxide/electrolyte solution interfacial region in magnetite.An experimental study of the open circuit dissolution of magnetite in sulfuric acid is presented and interpreted according to the proposed model.The reductive dissolution of magnetite is modelled by extension of the Valverde-Wagner model of oxide dissolution. Experimental results are presented to demonstrate that the reductive dissolution rate of magnetite in ferrous containing solutions is controlled by the rate of electron transfer from adsorbed Fe(II) to Fe(III) surface states of magnetite.