硫化锌掺锰/聚乙烯醇复合纳米纤维的制备与表征

利用静电纺丝法与气固反应相结合, 成功地制备了硫化锌掺锰/聚乙烯醇复合纳米纤维, 并对所制备的复合物进行了表征, 探讨了复合物的结构及其性能.     

Immobilization of a Monolayer of Bovine Serum Albumin on Gold Nanoparticles for Stereo‐specified Recognition of Dansyl‐norvaline

The assembly strategy to prepare a monolayer of bovine serum albumin on the surface of silica gel supported gold nanoparticles is described. The stereo‐specific recognition ability of this material was evaluated by enantioresolution of Dansyl‐norvaline. For enantiomeric separation, the influences of buffer concentration and the concentration of organic modifier on the separation performance were investigated. A better separation in terms of enantioresolution and peak shape was found with the phosphate concentration at 30 mM. Moreover, the peak shape and resolution can be improved by the addition of methanol solution. Enantioresolution of Dansyl‐norvaline was obtained from this material at optimized conditions. It appears that the immobilization of a monolayer of bovine serum albumin on gold nanoparticles as the chiral selector of Dansyl‐derivative amino acid is promising.     

铟锡氧化物(ITO)纳米颗粒的制备及表征

以金属In和SnCl₄·5H₂O为主要原料，加入保护剂PVP，利用化学共沉淀法合成了球形的铟锡氧化物(ITO)纳米颗粒。分别对PVP的用量、溶液的pH值、热处理温度等因素对ITO纳米颗粒粒径的影响进行了分析。并且借助透射电镜(TEM)、X射线衍射(XRD)对所合成的ITO纳米颗粒进行了表征。XRD分析说明本文合成了金刚砂型结构的铟锡氧化物纳米颗粒，并且其晶型结构随着热处理温度的升高而转变为铁锰矿型。     

纳米核壳式铜-锡双金属粉的制备及性能研究

A kind of novel core-shell Cu-Sn bimetallic nanoparticles has been prepared by a new method (displacement method), in which Sn was made to cover on the surface of Cu nano-core. The preparation method and reaction mechanism have been discussed. This reaction happened under the existence of coordinate agent-(NH₂)₂CS and protective agent PVP. The nanoparticles prepared were with a core-shell structure, granule diameter between 50～100 nm and good dispersing capability. The Cu-Sn nanoparticles proposed has better oxidation-resistant ability than Cu nanoparticles with corresponding granule diameter and can be applied as lubricant additives as well as antibacterial agent. When the additive amount is very low (0.1wt‰～0.5wt‰), it can improve the P_B of the lubricant by 92%～106%, and also enhance its antiwear characteristics and friction-reducing properties. At the concentration of 1 000 ppm, it can reach an antibacterial ratio of 99.99%.     

Photoinduced Electron Transfer between CdS and CdTe Nanoparticles in Colloidal Solutions

The photochemical behavior of solutions containing a mixture of CdS and CdTe nanoparticles under pulsed irradiation conditions was investigated. It was shown that electron transfer from the CdS particles to the CdTe nanoparticles occurs during the photoexcitation of such systems. The effectiveness of the process is increased with increase in the size of the CdTe nanoparticles. Such behavior is due to decrease in the potential of the CdTe conduction band with increase in the size of the nanoparticles as a result of the appearance of quantum-dimensional effects.     

聚丙烯/纳米蒙脱土复合材料的结晶动力学研究

采用热分析方法，研究了聚丙烯／纳米蒙脱土复合材料（PP／CLAY）的等温结晶行为，并分别用Avrami方程和赵志英方法对所得数据进行了分析，研究结果表明，纳米蒙脱土微粒对聚丙烯等温和非等温结晶行为均有不同程度的影响，可提高聚丙烯的结晶速率并改善结晶结构。     

Ultrafine molybdenum carbide nanoparticles supported on nitrogen doped carbon nanosheets for hydrogen evolution reaction

Nitrogen doped carbon nanosheets supported molybdenum carbides nanoparticles (Mo_xC/NCS) have been synthesized by tuning the mass ratio of melamine and ammonia molybdate. The Mo₂C/NCS-10 exhibits superior electrocatalytic performance and stability for HER, which was attributed to N-doped carbon nanosheets, small particle size, mesoporous structure, and large electrochemical active surface area.     

Computer Simulation of the Structure of Porous Electrodes with an Immobilized Enzyme and Nanosized Support Particles

The efficiency of the operation of a porous electrode with an immobilized enzyme is defined, in particular, by a lucky structure of its active layer, which can contain nanosized particles of the support. The composites of such a kind are prepared with the aid of methods of colloidal chemistry. The aim of this particular investigation is to perform a computer simulation of processes of coagulation of particles of the support and their possible heterocoagulation with molecules of the enzyme. Algorithms of the formation of nanocomposite structures in solution are suggested. Calculations show that the concentration of the enzyme molecules in the nanocomposite structures cannot exceed a certain critical value. On the other hand, at a fixed value of the concentration of the enzyme molecules, the concentration of the support particles must not fall below a certain threshold quantity, which provides for the passing of current through the active layer. In order for all the enzyme molecules, rather than for a fraction of these, in the composite to take part in the process of bioelectrocatalysis, the concentration of support particles must be increased even higher, to an optimum value.__________Translated from Elektrokhimiya, Vol. 41, No. 6, 2005, pp. 738–747.Original Russian Text Copyright © 2005 by Chirkov, Rostokin.     

Poly(ethyleneimine) as reducing and stabilizing agent for the formation of gold nanoparticles in w/o microemulsions

This paper is focused on the use of branched poly(ethyleneimine) (PEI) as reducing as well as stabilizing agent for the formation of gold nanoparticles in different media. The process of nanoparticle formation was investigated, in the absence of any other reducing agents, in microemulsion template phase in comparison to the nucleation process in aqueous polymer solution.

On the one hand, it was shown that the polyelectrolyte can be used for the controlled single-step synthesis and stabilization of gold nanoparticles via a nucleation reaction and particles with an average diameter of 7.1 nm can be produced.

On the other hand, it was demonstrated that the polymer can also act as reducing and stabilizing agent in much more complex systems, i.e. in water-in-oil (w/o) microemulsion droplets. The reverse microemulsion droplets of the quaternary system sodium dodecylsulfate (SDS)/toluene–pentanol (1:1)/water were successfully used for the synthesis of gold nanoparticles. The polymer, incorporated in the droplets, exhibits reducing properties, adsorbs on the surface of the nanoparticles and prevents their aggregation. Consequently, nanoparticles of 8.6 nm can be redispersed after solvent evaporation without a change of their size.

Nevertheless, the polymer acts already as a “template” during the formation of the nanoparticles in water and in microemulsion, so that an additional template effect of the microemulsion is not observed.

The particle formation for both methods is checked by means of UV–vis spectroscopy and the particle size and size distribution are investigated via dynamic light scattering and transmission electron microscopy (TEM).     

Hydrogenation of nitrobenzenes catalyzed by platinum nanoparticle core-polyaryl ether trisacetic acid ammonium chloride dendrimer shell nanocomposite

Platinum nanoparticle core-polyaryl ether trisacetic acid ammonium chloride dendrimer shell nanocomposites (Pt@G_n-NACl) were prepared and used as catalysts for hydrogenation of nitrobenzenes to anilines with molecular hydrogen under mild conditions. The as-prepared nanoparticles have mean particle size from 2.0 to 5.5 nm, depending on the molar ratio of the metal and the dendrimer. The Pt nanoparticles demonstrate near-monodisperse when the molar ratio of Pt and G₃-NACl is below 30. The interaction among three carboxyl groups terminated at the dendron and the metallic core keeps the Pt nanoparticles from agglomerating. The colloidal solution of Pt nanoparticles stabilized by the dendrimer, in which the molar ratio of Pt/G₃-NACl was less than 60, is stable without precipitation for several weeks. The dendrons attach to the metal core radially, and a substantial fraction of the surface of the metal nanoparticle is unpassivated and available for catalytic reactions. Turnover frequencies for the hydrogenation of nitrobenzenes to anilines change from 353 to 49 h⁻¹ depending on the dendrimer generation and substrates. The dendrimer catalysts are stable during the catalytic hydrogenation process and can be recovered by centrifugation and reused. The results suggest the effectiveness of polyaryl ether trisacetic acid ammonium chloride dendrimer as a stabilizer for the preparation of Pt nanoparticle catalysts.