沉淀法合成纳米晶长余辉材料Y2O2S∶Eu3+，Ti

The long-lasting phosphorescent materials, yttrium oxysulfides doped by Eu and Ti, were systhesized by coprecipitation with their subsequent thermal decomposition in the presence of sulphur. The products were characterized by XRD, TEM, phosphorescent spectra, and thermoluminescence. The XRD results indicate that the lowest synthesis temperature is 700 ℃. From the TEM, the average diameter of particles was in the range of 60～120 nm, and augmented with the increase of temperature. The materials under UV excitation presented well afterglow from the transition of ⁵D_0,1 → ⁷F_J of Eu³⁺, and the persistent time was about 2 h. The long-lasting afterglow mechanism was discussed, too.     

Low Temperature Sol-Gel Preparation of Nanocrystalline TiO2 Thin Films

TiO₂ nanocrystalline thin films with varying degree of porosity have been prepared using a low temperature method. TiO₂ films of the anatase form have been obtained by using a polyethylene glycol (PEG) modified sol-gel method. Densification and crystallization of the films was found to result from the thermal treatment of the dip coated films in boiling water. The films have been characterized by Raman, XRD, FTIR, AFM and optical methods. Highly transparent films with transmission in excess of 85% and porosity as high as 58% are formed predominantly of anatase crystallites of dimensions of the order of 5 nm. Initial results on lithium intercalation into these films resulting in an efficient optical modulation in the visible and near infrared regions demonstrate a good potential of these films for electrochromic applications.     

钙黄绿素蓝荧光法测定食品中的微量锌（Ⅱ）

本文研究了在ＣＴＭＡＢ存在下，用钙黄绿素蓝荧光法测定食品中的微量锌（Ⅱ）的实验条件。在本实验条件下，Ｚｎ（Ⅱ）与钙黄绿素蓝生成１：１的配合物使钙黄绿素蓝的荧光增强，最大激发波长和最大发射波长分别为３５３ｎｍ和４４０ｎｍ。     

Synthesis and structural, spectroscopic and magnetic studies of two new polymorphs of Mn(SeO3)·H2O

Two new manganese(II) selenite polymorphs with formula Mn(SeO₃)·H₂O have been synthesized by slow evaporation from an aqueous solution. The crystal structure of both compounds (1) and (2) have been solved from X-ray diffraction data. The structure of (1) was determined from single-crystal X-ray diffraction techniques. The compound crystallizes in the Ama2 space group, with a=5.817(1), b=13.449(3), and Z=4. The structure of (2) has been solved from X-ray powder diffraction data. This phase crystallizes in the P2₁/n space group with unit-cell parameters of a=4.921(3), b=13.121(7), , β=90.03(2)° and Z=4. Both polymorphs exhibit a layered structure formed by isolated sheets of MnO₆ octahedra and (SeO₃)²⁻ trigonal pyramids in the (010) plane. These layers, which contain one manganese and selenium atom crystallographically independent, are formed by octahedra linked between them through the selenite oxoanions. The difference of both compounds consists in the stacking of the layers along the b-axis. The IR spectra show the characteristic bands of the selenite anion. Studies of luminescence performed at 6 K and diffuse reflectance spectroscopy have been carried out for both phases. The Dq and Racah (B and C) parameters, from luminescence and diffuse reflectance spectroscopy, are Dq=705, B=750, for (1) and Dq=720, B=745, for (2). The ESR spectra of both compounds are isotropic with g-values of 1.99(1). Magnetic measurements indicate the presence of antiferromagnetic couplings in both phases. The J-exchange parameters have been estimated by fitting the experimental magnetic data to a model for square-planar lattice. The values obtained are J/k=-0.83, −0.91 K and J^′/k=-0.97, −1.20 K, for polymorphs (1) and (2), respectively.     

Visible Up-Conversion Luminescence in Ho3+: BaTiO3 Nano-Crystals Prepared by Sol Gel Technique

Visible up-conversion emissions at (435, 545, 580, 675 and 690 nm) and (437, 547 575 and 675 nm) have been observed from the sol-gel derived nano-crystalline Ho³⁺: BaTiO₃ powders and thin films respectively, under 808 nm laser diode excitation emissions. Combined with the energy level structure of Ho³⁺ ions and the kinetics of the visible emissions, the up-conversion mechanism has been analyzed and explained. The blue, green and red emissions of both samples has been attributed to the ground state-directed transition from (⁵F₁), (⁵S₂) and (⁵F₅), which are populated through excited state absorption (ESA) for 808 nm excitation. Nano-structure pure barium titanate and doped with different concentrations of Ho³⁺ ions in the from of powder and thin film have been prepared by sol-gel technique, using barium acetate (Ba(Ac)₂), and titanium butoxide (Ti(C₄H₉O)₄), as precursors. The thin films were prepared by sol-gel spin coating method. The as-grown thin films and powders were found to be amorphous, which crystallized to the tetragonal phase after heating at 750°C in air for 30 minutes. The crystallite sizes of the thin film and powder both doped with 4% Ho³⁺ ions was found to be equal to 11 and 16 nm, respectvely.     

Growth and Characterization of Crystal Nd_(0.06)Y_(0.94)Sr_6Sc(BO_3)_6

<正>The crystal of Nd0.06Y0.94Sr6Sc(BO3)6 with the dimensions up to 35 mm × 28 mm × 13 mm was grown by a top-seeded solution growth method from Li6B4O9 flux. The grown crystal was characterized by X-ray powder diffraction. The optical absorption of the crystal shows that it has a strong absorption band at 8070 A, and the absorption coefficient is 2.17cm-1 with a FWHM of 41 A, which can match with the wavelength of the diode-laser (LD) and is suitable for the LD pumping. Based on the Judd-Ofelt theory, the three parameters of line oscillator strength Ω(λ) (λ = 2, 4 and 6) of the Nd3+ion in the crystal were calculated as follows: Ω2= 1.194 × 10-20, Ω4= 4.186 × 10-20 and Ω6 = 3.351 × 10-20cm2, which are relatively larger. The results indicate that the crystal Nd0.06Y0.94Sr6Sc(BO3)6 may be a kind of high-efficient laser material for diode-pumped.     

Synthesis and characterization of metal polycarboxylates constructed from lanthanides(iii) and 1,2,4,5-benzenetetracarboxylic acid

The complexes of yttrium(III) and lanthanides(III) with 1,2,4,5-benzenetetracarboxylic acid were prepared as crystalline solids of the general formula Ln₄(C₁₀H₂O₈)₃⋅14H₂O. They are insoluble in water. On heating in air or inert gas atmosphere all compounds lose water molecules; next anhydrous compounds decompose to oxides. The yttrium complex and heavy lanthanide (from Ho to Lu) ones crystallize in monoclinic crystal system. The dehydration does not change the crystal structure of the compounds.     

醇盐法制备稀土化合物超微粉末

稀土元素具有广泛的用途,在大多数的应用中其效果都与原料的纯度、粒度、粒经分布范围等因素有关。由于超微粉末的比表面积大、化学活性高,因此可以预料,若将稀土化合物制成超微粉末,会使它的催化性能及在各种材料中的性能有明显的改变,也可使稀土有新的、更高的应用价值。     

Ab initio structure determination of new compound Ba3(BO3)(PO4)

The crystal structure of new compound Ba₃BPO₇ was determined by ab initio method from high-resolution conventional X-ray powder diffraction data. The Rietveld refinement converged to R_p=5.92%, R_wp=8.87%, R_exp=5.00% with the following details: Hexagonal, space group P6₃mc, a=5.4898 (1) Å, c=14.7551(1) Å, Z=2. The basic unit of the structure is the [BaO₁₀]-[BO₃]-[PO₄] polar polyhedra-chain composed of Ba1-B-P-O cluster. These chains, running along c-axis, stack in a HCP mode to build the whole structure with triangular prism channels. The channels are parallel to c-axis too, in which Ba2 and Ba3 are located.     

抗癌药物的电化学研究(Ⅱ)道诺霉素在DNA修饰石墨粉末微电极上的电化学行为及分析应用

研究了道诺霉素 ( DNM)在石墨粉末微电极和 DNA修饰石墨粉末微电极上的电化学行为 ,并分析了产生差别的原因。在此基础上 ,提出了测定微量 DNM的方法 ,DNM浓度在 1 .0× 1 0 - 7～ 1 .0× 1 0 - 5mol/L之间其微分脉冲伏安 ( DPV)峰电流与浓度有良好的线性关系 ,检出限为 5 .0× 1 0 - 8mol/L。采用标准加入法测定了模拟样品中的 DNM,回收率在 94%～ 1 0 8%之间 ,结果令人满意